FCC ID 2AOKB-R6112
Roav Bluetooth Receiver B2
by Anker Innovations Limited
Grantee Code: 2AOKB Product Code: R6112
Latest application date: 2018-05-31
FCC ID Device Details
| FCC ID | 2AOKB-R6112 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AOKB |
| Product Code | R6112 |
| Applicant Business | Anker Innovations Limited |
| Related Domains |  oceanwing.com |
| Equipment Class | Roav Bluetooth Receiver B2 |
| Test Firm | Shenzhen NTEK Testing Technology Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2018-05-31 |
| 2402-2480 MHz | Original Equipment | 2018-05-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2018-11-27 | PDF 2.8 MB |
| Internal photo | Internal Photos | 2018-11-27 | PDF 511.2 KB |
| External photo | External Photos | 2018-11-27 | PDF 836.3 KB |
| Label | ID Label/Location Info | 2018-05-31 | PDF 101.8 KB |
| Test setup photo | Test Setup Photos | 2018-11-27 | PDF 259.4 KB |
| Test setup photo | Test Setup Photos | 2018-07-15 | PDF 259.4 KB |
| Test report | Test Report | 2018-05-31 | PDF 936.2 KB |
| Test report | Test Report | 2018-05-31 | PDF 1.3 MB |
| Authorization Letter | Cover Letter(s) | 2018-05-31 | PDF 119.5 KB |
| Confidentiality request letter | Cover Letter(s) | 2018-05-31 | PDF 88.6 KB |
| MPE report | RF Exposure Info | 2018-05-31 | PDF 230.7 KB |
| Block diagram Metadata only | Block Diagram | PDF 53.1 KB | |
| Schematic Metadata only | Schematics | PDF 63.6 KB | |
| Operational description Metadata only | Operational Description | PDF 213.5 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 60 KB |
Application Information
| Application ID | u9PEgPAQZE2XoNunKhDGaA== |
|---|---|
| Final Action Date | 2018-05-31 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0027073105 |
| Model | R6112 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Roav Bluetooth Receiver B2 |
| Responsible Party | louis Qi, louis.qi@oceanwing.com , +86-13652441319 |
| Technical Contact | Jason Chen, Shenzhen NTEK Testing Technology Co., Ltd., jason_chen@ntek.org.cn  , 86-755-61156588 |
| Test Firm | Alex Li, Shenzhen NTEK Testing Technology Co., Ltd., certification@ntek.org.cn , +86-755-6115-9384 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 11/27/2018 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| u9PEgPAQZE2XoNunKhDGaA== | 2018-05-31 | Original Equipment |
| 64NN23yPJJ9+KpSkXbHehQ== | 2018-05-31 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application u9PEgPAQZE2XoNunKhDGaA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 05/31/2018 Application Dated: 05/31/2018 |
| Anker Innovations Limited |
| Room 1318-19, Hollywood Plaza |
| 610 Nathan Road, Mongkok |
| Kowloon, Hong Kong |
| Attention: louis Qi |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOKB-R6112 |
| Name of Grantee: | Anker Innovations Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Roav Bluetooth Receiver B2 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.0008 |
| Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application u9PEgPAQZE2XoNunKhDGaA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Anker Innovations Limited Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok Kowloon, Hong Kong |
Date of Grant: 05/31/2018 Application Dated: 05/31/2018 |
| Attention: louis Qi |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOKB-R6112 |
| Name of Grantee: | Anker Innovations Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Roav Bluetooth Receiver B2 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.0008 |
| Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 05/31/2018 Application Dated: 05/31/2018 |
| Anker Innovations Limited |
| Room 1318-19, Hollywood Plaza |
| 610 Nathan Road, Mongkok |
| Kowloon, Hong Kong |
| Attention: louis Qi |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOKB-R6112 |
| Name of Grantee: | Anker Innovations Limited |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Roav Bluetooth Receiver B2 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.0024 |
| Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 64NN23yPJJ9+KpSkXbHehQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Anker Innovations Limited Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok Kowloon, Hong Kong |
Date of Grant: 05/31/2018 Application Dated: 05/31/2018 |
| Attention: louis Qi |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOKB-R6112 |
| Name of Grantee: | Anker Innovations Limited |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Roav Bluetooth Receiver B2 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.0024 |
| Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |