S9 S9-SPEAKER Test Report Measurement Report Shen zhen Ou Chuang Si Technology Co., Ltd.

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

RADIO TEST REPORT
Report No: STS1712370W01
Issued for
Shen zhen Ou Chuang Si Technology Co., Ltd.
2rd floor,No.7,He Shu Road,Gang Tou Lu Kou,Ban Tian,Long
Gang,Shen Zhen.
Product Name:
S9-SPEAKER
Brand Name:
N/A
Model Name:
S9
Series Model:
N/A
FCC ID:
Test Standard:
2AOLU-S9
FCC Part 15.247
Any reproduction of this document must be done in full. No single part of this document may be reproduced without
permission from STS, All Test Data Presented in this report is only applicable to presented Test sample.
Shenzhen STS Test Services Co., Ltd.
1/F., Building B, Zhuoke Science Park, No.190, Chongqing Road,
Fuyong Street, Bao’an District, Shenzhen, Guangdong, China
TEL: +86-755 3688 6288 FAX: +86-755 3688 6277 E-mail:sts@stsapp.com
Page 2 of 70
Report No.: STS1712370W01
TEST RESULT CERTIFICATION
Applicant’sname…………:
Shen zhen Ou Chuang Si Technology Co., Ltd.
Address ..................................:
2rd floor,No.7,He Shu Road,Gang Tou Lu Kou,Ban Tian,Long
Gang,Shen Zhen.
Manufacture's Name ............:
Shen zhen Ou Chuang Si Technology Co., Ltd.
Address ..................................:
2rd floor,No.7,He Shu Road,Gang Tou Lu Kou,Ban Tian,Long
Gang,Shen Zhen.
Product description
Product Name ........................:
S9-SPEAKER
Brand Name .........................:
N/A
Model Name ...........................:
S9
Series Model ..........................:
N/A
Test Standards......................:
FCC Part15.247
Test procedure ........................... : ANSI C63.10-2013
This device described above has been tested by STS, the test results show that the equipment
under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested
sample identified in the report.
This report shall not be reproduced except in full, without the written approval of STS, this document
may be altered or revised by STS, personal only, and shall be noted in the revision of the document..
Date of Test............................... :
Date (s) of performance of tests : 29 Dec. 2017~04 Jan. 2018
Date of Issue ............................. : 04 Jan. 2018
Test Result ................................. : Pass
Testing Engineer
(Sean she)
Technical Manager
(Hakim.hou)
Authorized Signatory :
(Vita Li)
Page 3 of 70
Report No.: STS1712370W01
Table of Contents
1. SUMMARY OF TEST RESULTS
Page
1.1 TEST FACTORY
1.2 MEASUREMENT UNCERTAINTY
2. GENERAL INFORMATION
2.1 GENERAL DESCRIPTION OF EUT
2.2 DESCRIPTION OF TEST MODES
10
2.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING
10
2.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED
11
2.5 DESCRIPTION OF SUPPORT UNITS
11
2.6 EQUIPMENTS LIST FOR ALL TEST ITEMS
12
3. EMC EMISSION TEST
14
3.1 CONDUCTED EMISSION MEASUREMENT
14
3.2 RADIATED EMISSION MEASUREMENT
18
4. CONDUCTED SPURIOUS & BAND EDGE EMISSION
30
4.1 REQUIREMENT
30
4.2 TEST PROCEDURE
30
4.3 TEST SETUP
30
4.4 EUT OPERATION CONDITIONS
30
4.5 TEST RESULTS
31
5. NUMBER OF HOPPING CHANNEL
43
5.1 APPLIED PROCEDURES / LIMIT
43
5.2 TEST PROCEDURE
43
5.3 TEST SETUP
43
5.4 EUT OPERATION CONDITIONS
43
5.5 TEST RESULTS
44
6. AVERAGE TIME OF OCCUPANCY
45
6.1 APPLIED PROCEDURES / LIMIT
45
6.2 TEST PROCEDURE
45
6.3 TEST SETUP
45
6.4 EUT OPERATION CONDITIONS
45
6.5 TEST RESULTS
46
7. HOPPING CHANNEL SEPARATION MEASUREMEN
7.1 APPLIED PROCEDURES / LIMIT
52
52
Page 4 of 70
Table of Contents
Report No.: STS1712370W01
Page
7.2 TEST PROCEDURE
52
7.3 TEST SETUP
52
7.4 EUT OPERATION CONDITIONS
52
7.5 TEST RESULTS
53
8. BANDWIDTH TEST
59
8.1 APPLIED PROCEDURES / LIMIT
59
8.2 TEST PROCEDURE
59
8.3 TEST SETUP
59
8.4 EUT OPERATION CONDITIONS
59
8.5 TEST RESULTS
60
9. OUTPUT POWER TEST
66
9.1 APPLIED PROCEDURES / LIMIT
66
9.2 TEST PROCEDURE
66
9.3 TEST SETUP
66
9.4 EUT OPERATION CONDITIONS
66
9.5 TEST RESULTS
67
10. ANTENNA REQUIREMENT
68
10.1 STANDARD REQUIREMENT
68
10.2 EUT ANTENNA
68
Page 5 of 70
Report No.: STS1712370W01
Revision History
Rev.
Issue Date
Report NO.
Effect Page
Contents
00
04 Jan. 2018
STS1712370W01
ALL
Initial Issue
Page 6 of 70
Report No.: STS1712370W01
1. SUMMARY OF TEST RESULTS
Test procedures according to the technical standards: DA 00-705
FCC Part 15.247,Subpart C
Standard
Section
Test Item
Judgment
Remark
15.207
Conducted Emission
PASS
--
15.247(a)(1)
Hopping Channel Separation
PASS
--
15.247(a)(1)&(b)(1)
Output Power
PASS
--
15.247(c)
Radiated Spurious Emission
PASS
--
15.247(d)
Conducted Spurious & Band Edge
Emission
PASS
--
15.247(a)(iii)
Number of Hopping Frequency
PASS
--
15.247(a)(iii)
Dwell Time
PASS
--
15.247(a)(1)
Bandwidth
PASS
--
15.205
Restricted Band Edge Emission
PASS
--
Part 15.247(d)/part
15.209(a)
Band Edge Emission
PASS
--
15.203
Antenna Requirement
PASS
--
NOTE:
(1)” N/A” denotes test is not applicable in this Test Report
(2) All tests are according to ANSI C63.10-2013
Page 7 of 70
Report No.: STS1712370W01
1.1 TEST FACTORY
Shenzhen STS Test Services Co., Ltd.
Add. : 1/F., Building B, Zhuoke Science Park, No.190, Chongqing Road,
Fuyong Street, Bao’an District, Shenzhen, Guangdong, China
CNAS Registration No.: L7649; FCC Registration No.: 625569
IC Registration No.: 12108A; A2LA Certificate No.: 4338.01;
1.2 MEASUREMENT UNCERTAINTY
The reported uncertainty of measurement y ±U，where expended uncertainty U is based on a
standard uncertainty multiplied by a coverage factor of
k=2，providing a level of confidence of
approximately 95 %。
No.
Item
Uncertainty
Conducted Emission (9KHz-150KHz)
±2.88dB
Conducted Emission (150KHz-30MHz)
±2.67dB
RF power,conducted
±0.71dB
Spurious emissions,conducted
±0.63dB
All emissions,radiated (9KHz-30MHz)
±3.02dB
All emissions,radiated (30MHz-200MHz)
±3.80dB
All emissions,radiated (200MHz-1000MHz)
±3.97dB
All emissions,radiated(>1G)
±3.03dB
Page 8 of 70
Report No.: STS1712370W01
2. GENERAL INFORMATION
2.1 GENERAL DESCRIPTION OF EUT
Product Name
S9-SPEAKER
Trade Name
N/A
Model Name
S9
Series Model
N/A
Model Difference
N/A
Channel List
Please refer to the Note 2.
Bluetooth
Frequency:2402 – 2480 MHz
Modulation: GFSK(1Mbps), π/4-DQPSK(2Mbps),
8DPSK(3Mbps)
Adapter
N/A
Battery
Rated Voltage: 3.7V
Capacity: 400mAh
Hardware version number
V1.0
Software version number
3.2V04
Connecting I/O Port(s)
Please refer to the User's Manual
Note:
1. For a more detailed features description, please refer to the manufacturer’s specifications
or the User's Manual.
Page 9 of 70
Report No.: STS1712370W01
2.
Channel List
Frequency
Frequency
Frequency
Channel
Channel
Channel
(MHz)
(MHz)
(MHz)
00
2402
27
2429
54
2456
01
2403
28
2430
55
2457
02
2404
29
2431
56
2458
03
2405
30
2432
57
2459
04
2406
31
2433
58
2460
05
2407
32
2434
59
2461
06
2408
33
2435
60
2462
07
2409
34
2436
61
2463
08
2410
35
2437
62
2464
09
2411
36
2438
63
2465
10
2412
37
2439
64
2466
11
2413
38
2440
65
2467
12
2414
39
2441
66
2468
13
2415
40
2442
67
2469
14
2416
41
2443
68
2470
15
2417
42
2444
69
2471
16
2418
43
2445
70
2472
17
2419
44
2446
71
2473
18
2420
45
2447
72
2474
19
2421
46
2448
73
2475
20
2422
47
2449
74
2476
21
2423
48
2450
75
2477
22
2424
49
2451
76
2478
23
2425
50
2452
77
2479
24
2426
51
2453
78
2480
25
2427
52
2454
26
2428
53
2455
3. Table for Filed Antenna
Model
Ant
Brand
Antenna Type Connector Gain (dBi)
NOTE
Name
BT
N/A
S9
PCB Antenna
N/A
Antenna
Page 10 of 70
Report No.: STS1712370W01
2.2 DESCRIPTION OF TEST MODES
To investigate the maximum EMI emission characteristics generates from EUT, the test system
was pre-scanning tested base on the consideration of following EUT operation mode or test
configuration mode which possible have effect on EMI emission level. Each of these EUT
operation mode(s) or test configuration mode(s) mentioned above was evaluated respectively.
Worst Mode
Description
Data Rate/Modulation
Mode 1
TX CH00
1Mbps/GFSK
Mode 2
TX CH39
1Mbps/GFSK
Mode 3
TX CH78
1Mbps/GFSK
Mode 4
TX CH00
2 Mbps/π/4-DQPSK
Mode 5
TX CH39
2 Mbps/π/4-DQPSK
Mode 6
TX CH78
2 Mbps/π/4-DQPSK
Mode7
TX CH00
3 Mbps/8DPSK
Mode 8
TX CH39
3 Mbps/8DPSK
Mode 9
TX CH78
3 Mbps/8DPSK
Note:
(1) The measurements are performed at all Bit Rate of Transmitter, the worst data was
reported
(2) We have be tested for all avaiable U.S. voltage and frequencies(For 120V,50/60Hz
and 240V, 50/60Hz) for which the device is capable of operation, and the worst case of
120V,50/60Hz is shown in the report
For AC Conducted Emission
Test Case
AC Conducted
Mode 10 : Keeping BT TX
Emission
2.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING
During testing channel & power controlling software provided by the customer was used to control
the operating channel as well as the output power level. The RF output power selection is for the
setting of RF output power expected by the customer and is going to be fixed on the firmware of
the final end product power parameters of FHSS.
Test software Version
Frequency
(Power control software)
Parameters(1/2/3Mbps)
Test program: Bluetooth
2402 MHz
2441 MHz
2480 MHz
Power class:
1 M rate:4:27
2 M rate:11:183
3 M rate:15:339
Power class:
1 M rate:4:27
2 M rate:11:183
3 M rate:15:339
Power class:
1 M rate:4:27
2 M rate:11:183
3 M rate:15:339
Page 11 of 70
Report No.: STS1712370W01
2.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED
During testing channel & power controlling software provided by the customer was used to control
the operating channel as well as the output power level. The RF output power selection is for the
setting of RF output power expected by the customer and is going to be fixed on the firmware of
the final end product power parameters of FHSS
Radiated Spurious EmissionTest
C-1
E-1
EUT
E-2
PC
Conducted Emission Test
C-2
E-1
EUT
E-3
Adapter
2.5 DESCRIPTION OF SUPPORT UNITS
The EUT has been tested as an independent unit together with other necessary accessories or
support units. The following support units or accessories were used to form a representative test
configuration during the tests.
Item
Equipment
Mfr/Brand
Model/Type No.
Serial
No.
Note
E-2
PC
HP
N/A
N/A
N/A
E-3
Adapter
N/A
N/A
N/A
N/A
Item
Shielded Type
Ferrite Core
Length
Note
C-1
USB Cable shielded
line (Charging )
NO
100cm
N/A
C-2
DC power cable
NO
80cm
N/A
Note:
(1)
(2)
(3)
The support equipment was authorized by Declaration of Confirmation.
For detachable type I/O cable should be specified the length in cm in『Length』column.
“YES” is means “shielded” “with core”; “NO” is means “unshielded” “without core”.
Page 12 of 70
Report No.: STS1712370W01
2.6 EQUIPMENTS LIST FOR ALL TEST ITEMS
Radiation Test equipment
Kind of Equipment
Manufacturer
Type No.
Serial No.
EMI Test Receiver
R&S
ESW
101535
2017.06.01
2018.05.31
Bilog Antenna
TESEQ
CBL6111D
34678
2017.03.24
2018.03.23
Horn Antenna
Schwarzbeck
BBHA 9120D
9120D-1343
2017.03.06
2018.03.05
2017.05.02
2018.05.01
SHF-EHF Horn
Antenna (15G-40GHz)
Temperature &
Humitidy
Temperature &
Humitidy
Pre-mplifier
(0.1M-3GHz)
PreAmplifier
(1G-26.5GHz)
BBHA 9170
Last calibration Calibrated until
SCHWARZBECK BBHA9170367
HH660
Mieo
N/A
2017.10.15
2018.10.14
HH660
Mieo
N/A
2017.10.15
2018.10.14
EM
EM330
60538
2017.03.12
2018.03.11
Agilent
8449B
60538
2017.10.15
2018.10.14
AP-040G
1382501
2017.05.15
2018.05.14
Pre-mplifier (18G-40G) MINI-CIRCUITS
Operational Manual
Passive Loop
(9K--30MHz)
ETS
6512
00165355
2017.03.06
2018.03.05
Low frequency cable
EM
R01
N/A
2017.03.12
2018.03.11
Low frequency cable
EM
R06
N/A
2017.03.12
2018.03.11
High frequency cable SCHWARZBECK
R04
N/A
2017.03.12
2018.03.11
High frequency cable SCHWARZBECK
R02
N/A
2017.03/12
2018.03.11
Semi-anechoic
chamber
Changling
966
N/A
2017.10.15
2018.10.14
trun table
EM
SC100_1
60531
N/A
N/A
Antnna mast
EM
SC100
N/A
N/A
N/A
Max-full Antenna Corp
MF
MFA-440H
N/A
N/A
N/A
Conduction Test equipment
Kind of Equipment
Manufacturer
Type No.
Serial No.
Last calibration Calibrated until
Test Receiver
R&S
ESCI
101427
2017.10.15
2018.10.14
LISN
R&S
ENV216
101242
2017.10.15
2018.10.14
conduction Cable
EM
C01
N/A
2017.03.12
2018.03.11
Temperature &
Humitidy
Mieo
HH660
N/A
2017.10.15
2018.10.14
Page 13 of 70
Report No.: STS1712370W01
RF Connected Test
Kind of Equipment
Manufacturer
Type No.
Serial No.
Last calibration Calibrated until
USB RF power sensor
DARE
RPR3006W
15I00041SNO03
2017.10.15
2018.10.14
Power Meter
R&S
NRP
100510
2017.10.15
2018.10.14
Spectrum Analyzer
Agilent
E4407B
MY50140340
2017.03.11
2018.03.10
Signal Analyzer
Agilent
N9020A
MY49100060
2017.03.11
2018.03.10
Page 14 of 70
Report No.: STS1712370W01
3. EMC EMISSION TEST
3.1 CONDUCTED EMISSION MEASUREMENT
3.1.1 POWER LINE CONDUCTED EMISSION LIMITS
Operating frequency band. In case the emission fall within the restricted band specified on Part
207(a) limit in the table below has to be followed.
FREQUENCY (MHz)
Conducted Emissionlimit (dBuV)
Quasi-peak
Average
0.15 -0.5
66 - 56 *
56 - 46 *
0.50 -5.0
56.00
46.00
5.0 -30.0
60.00
50.00
Note:
(1) The tighter limit applies at the band edges.
(2) The limit of " * " marked band means the limitation decreases linearly with the
logarithm of the frequency in the range.
The following table is the setting of the receiver
Receiver Parameters
Setting
Attenuation
10 dB
Start Frequency
0.15 MHz
Stop Frequency
30 MHz
IF Bandwidth
9 kHz
Page 15 of 70
Report No.: STS1712370W01
3.1.2 TEST PROCEDURE
a. The EUT was 0.8 meters from the horizontal ground plane and 0.4 meters from the vertical
ground plane with EUT being connected to the power mains through a line impedance
stabilization network (LISN). All other support equipments powered from additional LISN(s).
The LISN provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument.
b. Interconnecting cables that hang closer than 40 cm to the ground plane shall be folded back
and forth in the center forming a bundle 30 to 40 cm long.
c. I/O cables that are not connected to a peripheral shall be bundled in the center. The end of the
cable may be terminated, if required, using the correct terminating impedance. The overall
length shall not exceed 1 m.
d. LISN at least 80 cm from nearest part of EUT chassis.
e. For the actual test configuration, please refer to the related Item –EUT Test Photos.
3.1.3 TEST SETUP
Vertical Reference
Test Receiver
Ground Plane
40cm
EUT
80cm
LISN
Horizontal Reference
Ground Plane
Note: 1.Support units were connected to second LISN.
2.Both of LISNs (AMN) are 80 cm from EUT and at least 80
cm
from other units and other metal planes
support.
units.
3.1.4 EUT OPERATING CONDITIONS
The EUT was configured for testing in a typical fashion (as a customer would normally use it). The
EUT has been programmed to continuously transmit during test. This operating condition was
tested and used to collect the included data.
Page 16 of 70
Report No.: STS1712370W01
3.1.5 TEST RESULT
Temperature:
26 ℃
Relative Humidity:
54%
Pressure:
1010hPa
Phase:
Test Voltage:
AC 120V/60Hz
Test Mode:
Mode 10
Remark:
1. All readings are Quasi-Peak and Average values.
2. Margin = Result (Result =Reading + Factor )–Limit
Page 17 of 70
Report No.: STS1712370W01
Temperature:
26 ℃
Relative Humidity:
54%
Pressure:
1010hPa
Phase:
Test Voltage:
AC 120V/60Hz
Test Mode:
Mode 10
Remark:
1. All readings are Quasi-Peak and Average values.
2. Margin = Result (Result =Reading + Factor )–Limit
Page 18 of 70
Report No.: STS1712370W01
3.2 RADIATED EMISSION MEASUREMENT
3.2.1 RADIATED EMISSION LIMITS
in any 100 kHz bandwidth outside the operating frequency band. In case the emission fall within
the Restricted band specified on Part15.205(a)&209(a) limit in the table and according to ANSI
C63.10-2013 below has to be followed
LIMITS OF RADIATED EMISSION MEASUREMENT (0.009MHz - 1000MHz)
Frequencies
Field Strength
Measurement Distance
(MHz)
(micorvolts/meter)
(meters)
0.009~0.490
2400/F(KHz)
300
0.490~1.705
24000/F(KHz)
30
1.705~30.0
30
30
30~88
100
88~216
150
216~960
200
Above 960
500
LIMITS OF RADIATED EMISSION MEASUREMENT (1GHz-25 GHz)
FREQUENCY (MHz)
Above 1000
(dBuV/m) (at 3M)
PEAK
AVERAGE
74
54
Notes:
(1) The limit for radiated test was performed according to FCC PART 15C.
(2) The tighter limit applies at the band edges.
(3) Emission level (dBuV/m)=20log Emission level (uV/m).
For Radiated Emission
Spectrum Parameter
Setting
Attenuation
Auto
Detector
Peak
Start Frequency
1000 MHz(Peak/AV)
Stop Frequency
10th carrier hamonic(Peak/AV)
RB / VB (emission in restricted
band)
For Band edge
Spectrum Parameter
Detector
Start/Stop Frequency
RB / VB (emission in restricted band)
PK=1MHz / 1MHz, AV=1 MHz /10 Hz
Setting
Peak
Lower Band Edge: 2300 to 2403 MHz
Upper Band Edge: 2479 to 2500 MHz
PK=1MHz / 1MHz, AV=1 MHz / 10 Hz
Page 19 of 70
Report No.: STS1712370W01
Receiver Parameter
Setting
Attenuation
Auto
Start ~ Stop Frequency
9kHz~90kHz / RB 200Hz for PK & AV
Start ~ Stop Frequency
90kHz~110kHz / RB 200Hz for QP
Start ~ Stop Frequency
110kHz~490kHz / RB 200Hz for PK & AV
Start ~ Stop Frequency
490kHz~30MHz / RB 9kHz for QP
Start ~ Stop Frequency
30MHz~1000MHz / RB 120kHz for QP
3.2.2 TEST PROCEDURE
a. The measuring distance of at 3 m shall be used for measurements at frequency 0.009MHz up
to 1GHz,and above 1GHz.
b. The EUT was placed on the top of a rotating table 0.8 meters(above 1GHz is 1.5 m) above the
ground at a 3 meter anechoic chamber test site. The table was rotated 360 degrees to
determine the position of the highest radiation.
c. The height of the equipment shall be 0.8 m(above 1GHz is 1.5 m); the height of the test
antenna shall vary between 1 m to 4 m. horizontal and vertical polarizations of the antenna are
set to make the measurement.
d. The initial step in collecting conducted emission data is a spectrum analyzer peak detector
mode pre-scanning the measurement frequency range. Significant peaks are then marked and
then QuasiPeak detector mode re-measured.
e. If the Peak Mode measured value compliance with and lower than Quasi Peak Mode Limit, the
EUT shall be deemed to meet QP Limits and then no additional QP Mode measurement
performed.
f. For the actual test configuration, please refer to the related Item –EUT Test Photos.
Note:
Both horizontal and vertical antenna polarities were tested
and performed pretest to three orthogonal axis. The worst case emissions were reported
3.2.3 DEVIATION FROM TEST STANDARD
No deviation
Page 20 of 70
Report No.: STS1712370W01
3.2.4 TESTSETUP
（A）Radiated Emission Test-Up Frequency Below 30MHz
（B）Radiated Emission Test-Up Frequency 30MHz~1GHz
（C）Radiated Emission Test-Up Frequency Above 1GHz
3.2.5 EUT OPERATING CONDITIONS
The EUT tested system was configured as the statements of 2.4 Unless otherwise a special
operating condition is specified in the follows during the testing.
Page 21 of 70
Report No.: STS1712370W01
3.2.6 FIELD STRENGTH CALCULATION
The field strength is calculated by adding the Antenna Factor and Cable Factor and subtracting
the Amplifier Gain and Duty Cycle Correction Factor (if any) from the measured reading. The basic
equation with a sample calculation is as follows:
FS = RA + AF + CL - AG
Where
FS = Field Strength
CL = Cable Attenuation Factor (Cable Loss)
RA = Reading Amplitude
AG = Amplifier Gain
AF = Antenna Factor
For example
Frequency
FS
RA
AF
CL
AG
Factor
(MHz)
(dBμV/m)
(dBμV/m)
(dB)
(dB)
(dB)
(dB)
300
Factor=AF+CL-AG
40
58.1
12.2
1.6
31.9
-18.1
Page 22 of 70
Report No.: STS1712370W01
3.2.7 TEST RESULTS
(9KHz-30MHz)
Temperature:
26 ℃
Relative Humidity:
54%
Pressure:
1010hPa
Test Mode:
TX Mode
Test Voltage:
DC 3.7V from battery
Freq.
Reading
Limit
Margin
State
(MHz)
(dBuV/m)
(dBuV/m)
(dB)
P/F
--
--
--
--
--
PASS
--
--
--
--
--
PASS
Test Result
Note:
The amplitude of spurious emissions which are attenuated by more than 20dB below the
permissible value has no need to be reported.
Distance extrapolation factor =40 log (specific distance/test distance)(dB);
Limit line = specific limits(dBuv) + distance extrapolation factor.
Page 23 of 70
Report No.: STS1712370W01
(30MHz-1000MHz)
Temperature:
26 ℃
Relative Humidity:
54%
Pressure:
1010hPa
Phase:
Horizontal
Test Voltage:
DC 3.7V from battery
Test Mode:
Mode 1/2/3/4/5/6/7/8/9
(Mode 3-1M worst mode)
Remark:
1. Margin = Result (Result =Reading + Factor )–Limit
Page 24 of 70
Report No.: STS1712370W01
Temperature:
26 ℃
Relative Humidity:
54%
Pressure:
1010hPa
Phase:
Vertical
Test Voltage:
DC 3.7V from battery
Test Mode:
Mode 1/2/3/4/5/6/7/8/9
(Mode 3-1M worst mode)
Remark:
1. Margin = Result (Result =Reading + Factor )–Limit
Page 25 of 70
Report No.: STS1712370W01
(1GHz~25GHz) Restricted band and Spurious emission Requirements
GFSK Low Channel
Antenna
Corrected
Emission
Frequency
Reading
Amplifier
Loss
Factor
Factor
Level
Limits
Margin
Detector
(MHz)
(dBμV)
（dB）
（dB）
（dB/m）
（dB）
(dBμV/m)
(dBμV/m)
(dB)
Type
Comment
Low Channel (2402 MHz)
3264.86
49.24
44.70
6.70
28.20
-9.80
39.44
74.00
-34.56
PK
Vertical
3264.86
39.05
44.70
6.70
28.20
-9.80
29.25
54.00
-24.75
AV
Vertical
3264.56
49.16
44.70
6.70
28.20
-9.80
39.36
74.00
-34.64
PK
Horizontal
3264.56
39.05
44.70
6.70
28.20
-9.80
29.25
54.00
-24.75
AV
Horizontal
4804.31
58.58
44.20
9.04
31.60
-3.56
55.02
74.00
-18.98
PK
Vertical
4804.31
38.53
44.20
9.04
31.60
-3.56
34.97
54.00
-19.03
AV
Vertical
4804.39
58.74
44.20
9.04
31.60
-3.56
55.18
74.00
-18.82
PK
Horizontal
4804.39
38.24
44.20
9.04
31.60
-3.56
34.68
54.00
-19.32
AV
Horizontal
5359.85
45.21
44.20
9.86
32.00
-2.34
42.87
74.00
-31.13
PK
Vertical
5359.85
37.05
44.20
9.86
32.00
-2.34
34.71
54.00
-19.29
AV
Vertical
5359.86
45.27
44.20
9.86
32.00
-2.34
42.93
74.00
-31.07
PK
Horizontal
5359.86
38.34
44.20
9.86
32.00
-2.34
36.00
54.00
-18.00
AV
Horizontal
7205.89
50.83
43.50
11.40
35.50
3.40
54.23
74.00
-19.77
PK
Vertical
7205.89
33.87
43.50
11.40
35.50
3.40
37.27
54.00
-16.73
AV
Vertical
7205.69
51.63
43.50
11.40
35.50
3.40
55.03
74.00
-18.97
PK
Horizontal
7205.69
33.65
43.50
11.40
35.50
3.40
37.05
54.00
-16.95
AV
Horizontal
Page 26 of 70
Report No.: STS1712370W01
GFSK Mid Channel
Antenna
Corrected
Emission
Frequency
Reading
Amplifier
Loss
Factor
Factor
Level
Limits
Margin
Detector
(MHz)
(dBμV)
（dB）
（dB）
（dB/m）
（dB）
(dBμV/m)
(dBμV/m)
(dB)
Type
Comment
Mid Channel (2441 MHz)
3264.83
48.81
44.70
6.70
28.20
-9.80
39.01
74.00
-34.99
PK
Vertical
3264.83
39.71
44.70
6.70
28.20
-9.80
29.91
54.00
-24.09
AV
Vertical
3264.72
48.77
44.70
6.70
28.20
-9.80
38.97
74.00
-35.03
PK
Horizontal
3264.72
38.99
44.70
6.70
28.20
-9.80
29.19
54.00
-24.81
AV
Horizontal
4882.37
58.20
44.20
9.04
31.60
-3.56
54.64
74.00
-19.36
PK
Vertical
4882.37
39.17
44.20
9.04
31.60
-3.56
35.61
54.00
-18.39
AV
Vertical
4882.33
59.60
44.20
9.04
31.60
-3.56
56.04
74.00
-17.96
PK
Horizontal
4882.33
39.11
44.20
9.04
31.60
-3.56
35.55
54.00
-18.45
AV
Horizontal
5359.62
46.03
44.20
9.86
32.00
-2.34
43.69
74.00
-30.31
PK
Vertical
5359.62
37.34
44.20
9.86
32.00
-2.34
35.00
54.00
-19.00
AV
Vertical
5359.74
45.95
44.20
9.86
32.00
-2.34
43.61
74.00
-30.39
PK
Horizontal
5359.74
37.13
44.20
9.86
32.00
-2.34
34.79
54.00
-19.21
AV
Horizontal
7313.94
51.49
43.50
11.40
35.50
3.40
54.89
74.00
-19.11
PK
Vertical
7313.94
32.89
43.50
11.40
35.50
3.40
36.29
54.00
-17.71
AV
Vertical
7313.93
51.07
43.50
11.40
35.50
3.40
54.47
74.00
-19.53
PK
Horizontal
7313.93
33.36
43.50
11.40
35.50
3.40
36.76
54.00
-17.24
AV
Horizontal
Page 27 of 70
Report No.: STS1712370W01
GFSK High Channel
Antenna
Corrected
Emission
Frequency
Reading
Amplifier
Loss
Factor
Factor
Level
Limits
Margin
Detector
(MHz)
(dBμV)
（dB）
（dB）
（dB/m）
（dB）
(dBμV/m)
(dBμV/m)
(dB)
Type
Comment
High Channel (2480 MHz)
3264.82
48.93
44.70
6.70
28.20
-9.80
39.13
74.00
-34.87
PK
Vertical
3264.82
38.77
44.70
6.70
28.20
-9.80
28.97
54.00
-25.03
AV
Vertical
3264.68
48.91
44.70
6.70
28.20
-9.80
39.11
74.00
-34.89
PK
Horizontal
3264.68
38.45
44.70
6.70
28.20
-9.80
28.65
54.00
-25.35
AV
Horizontal
4960.41
58.87
44.20
9.04
31.60
-3.56
55.31
74.00
-18.69
PK
Vertical
4960.41
39.33
44.20
9.04
31.60
-3.56
35.77
54.00
-18.23
AV
Vertical
4960.33
59.03
44.20
9.04
31.60
-3.56
55.47
74.00
-18.53
PK
Horizontal
4960.33
38.47
44.20
9.04
31.60
-3.56
34.91
54.00
-19.09
AV
Horizontal
5359.86
44.98
44.20
9.86
32.00
-2.34
42.64
74.00
-31.36
PK
Vertical
5359.86
38.22
44.20
9.86
32.00
-2.34
35.88
54.00
-18.12
AV
Vertical
5359.74
45.68
44.20
9.86
32.00
-2.34
43.34
74.00
-30.66
PK
Horizontal
5359.74
37.92
44.20
9.86
32.00
-2.34
35.58
54.00
-18.42
AV
Horizontal
7439.83
51.92
43.50
11.40
35.50
3.40
55.32
74.00
-18.68
PK
Vertical
7439.83
33.39
43.50
11.40
35.50
3.40
36.79
54.00
-17.21
AV
Vertical
7439.80
51.60
43.50
11.40
35.50
3.40
55.00
74.00
-19.00
PK
Horizontal
7439.80
32.87
43.50
11.40
35.50
3.40
36.27
54.00
-17.73
AV
Horizontal
Note:
1)
Scan with GFSK, π/4-DQPSK,8DPSK,the worst case is GFSK Mode
2)
Factor = Antenna Factor + Cable Loss – Pre-amplifier.
Emission Level = Reading + Factor
The frequency emission of peak points that did not show above the forms are at least 20dB below the limit, the frequency
3)
emission is mainly from the environment noise.
Page 28 of 70
Report No.: STS1712370W01
Band edge Requirements
Antenna
Corrected
Emission
Frequency
Reading
Amplifier
Loss
Factor
Factor
Level
Limits
Margin
Detector
(MHz)
(dBμV)
（dB）
（dB）
（dB/m）
（dB）
(dBμV/m)
(dBμV/m)
(dB)
Type
Comment
GFSK
2390.00
68.22
43.80
4.91
25.90
-12.99
55.23
74.00
-18.77
PK
Vertical
2390.00
54.09
43.80
4.91
25.90
-12.99
41.10
54.00
-12.90
AV
Vertical
2390.00
68.87
43.80
4.91
25.90
-12.99
55.88
74.00
-18.12
PK
Horizontal
2390.00
53.45
43.80
4.91
25.90
-12.99
40.46
54.00
-13.54
AV
Horizontal
2483.50
69.41
43.80
5.12
25.90
-12.78
56.63
74.00
-17.37
PK
Vertical
2483.50
52.17
43.80
5.12
25.90
-12.78
39.39
54.00
-14.61
AV
Vertical
2483.50
70.02
43.80
5.12
25.90
-12.78
57.24
74.00
-16.76
PK
Horizontal
2483.50
52.54
43.80
5.12
25.90
-12.78
39.76
54.00
-14.24
AV
Horizontal
π/4-DQPSK
2390.00
67.93
43.80
4.91
25.90
-12.99
54.94
74.00
-19.06
PK
Vertical
2390.00
53.35
43.80
4.91
25.90
-12.99
40.36
54.00
-13.64
AV
Vertical
2390.00
69.51
43.80
4.91
25.90
-12.99
56.52
74.00
-17.48
PK
Horizontal
2390.00
52.72
43.80
4.91
25.90
-12.99
39.73
54.00
-14.27
AV
Horizontal
2483.50
69.35
43.80
5.12
25.90
-12.78
56.57
74.00
-17.43
PK
Vertical
2483.50
52.34
43.80
5.12
25.90
-12.78
39.56
54.00
-14.44
AV
Vertical
2483.50
69.56
43.80
5.12
25.90
-12.78
56.78
74.00
-17.22
PK
Horizontal
2483.50
52.71
43.80
5.12
25.90
-12.78
39.93
54.00
-14.07
AV
Horizontal
8DPSK
2390.00
67.87
43.80
4.91
25.90
-12.99
54.88
74.00
-19.12
PK
Vertical
2390.00
53.60
43.80
4.91
25.90
-12.99
40.61
54.00
-13.39
AV
Vertical
2390.00
69.53
43.80
4.91
25.90
-12.99
56.54
74.00
-17.46
PK
Horizontal
2390.00
52.85
43.80
4.91
25.90
-12.99
39.86
54.00
-14.14
AV
Horizontal
2483.50
69.59
43.80
5.12
25.90
-12.78
56.81
74.00
-17.19
PK
Vertical
2483.50
53.05
43.80
5.12
25.90
-12.78
40.27
54.00
-13.73
AV
Vertical
2483.50
70.42
43.80
5.12
25.90
-12.78
57.64
74.00
-16.36
PK
Horizontal
2483.50
52.88
43.80
5.12
25.90
-12.78
40.10
54.00
-13.90
AV
Horizontal
Low measurement frequencies is range from 2300 to 2403 MHz, high measurement frequencies is range from 2479 to 2500 MHz.
Only showthe worst point data of the emissions in the frequency 2300-2403 MHz and 2479-2500 MHz.
Page 29 of 70
Report No.: STS1712370W01
Hopping Band edge
Antenna
Corrected
Emission
Frequency
Reading
Amplifier
Loss
Factor
Factor
Level
Limits
Margin
Detector
(MHz)
(dBμV)
（dB）
（dB）
（dB/m）
（dB）
(dBμV/m)
(dBμV/m)
(dB)
Type
Comment
GFSK
2390.00
68.16
43.80
4.91
25.90
-12.99
55.17
74.00
-18.83
PK
Vertical
2390.00
53.27
43.80
4.91
25.90
-12.99
40.28
54.00
-13.72
AV
Vertical
2390.00
69.27
43.80
4.91
25.90
-12.99
56.28
74.00
-17.72
PK
Horizontal
2390.00
52.38
43.80
4.91
25.90
-12.99
39.39
54.00
-14.61
AV
Horizontal
2483.50
70.42
43.80
5.12
25.90
-12.78
57.64
74.00
-16.36
PK
Vertical
2483.50
52.83
43.80
5.12
25.90
-12.78
40.05
54.00
-13.95
AV
Vertical
2483.50
70.21
43.80
5.12
25.90
-12.78
57.43
74.00
-16.57
PK
Horizontal
2483.50
53.03
43.80
5.12
25.90
-12.78
40.25
54.00
-13.75
AV
Horizontal
π/4-DQPSK
2390.00
67.32
43.80
4.91
25.90
-12.99
54.33
74.00
-19.67
PK
Vertical
2390.00
54.06
43.80
4.91
25.90
-12.99
41.07
54.00
-12.93
AV
Vertical
2390.00
69.44
43.80
4.91
25.90
-12.99
56.45
74.00
-17.55
PK
Horizontal
2390.00
52.25
43.80
4.91
25.90
-12.99
39.26
54.00
-14.74
AV
Horizontal
2483.50
69.33
43.80
5.12
25.90
-12.78
56.55
74.00
-17.45
PK
Vertical
2483.50
52.84
43.80
5.12
25.90
-12.78
40.06
54.00
-13.94
AV
Vertical
2483.50
70.26
43.80
5.12
25.90
-12.78
57.48
74.00
-16.52
PK
Horizontal
2483.50
53.41
43.80
5.12
25.90
-12.78
40.63
54.00
-13.37
AV
Horizontal
8DPSK
2390.00
67.49
43.80
4.91
25.90
-12.99
54.50
74.00
-19.50
PK
Vertical
2390.00
54.17
43.80
4.91
25.90
-12.99
41.18
54.00
-12.82
AV
Vertical
2390.00
68.49
43.80
4.91
25.90
-12.99
55.50
74.00
-18.50
PK
Horizontal
2390.00
53.29
43.80
4.91
25.90
-12.99
40.30
54.00
-13.70
AV
Horizontal
2483.50
69.38
43.80
5.12
25.90
-12.78
56.60
74.00
-17.40
PK
Vertical
2483.50
53.39
43.80
5.12
25.90
-12.78
40.61
54.00
-13.39
AV
Vertical
2483.50
69.99
43.80
5.12
25.90
-12.78
57.21
74.00
-16.79
PK
Horizontal
2483.50
53.49
43.80
5.12
25.90
-12.78
40.71
54.00
-13.29
AV
Horizontal
Low measurement frequencies is range from 2300 to 2403 MHz,high measurement frequencies is range from 2479 to 2500 MHz.
Only showthe worst point data of the emissions in the frequency 2300-2403 MHz and 2479-2500 MHz.
Page 30 of 70
Report No.: STS1712370W01
4. CONDUCTED SPURIOUS & BAND EDGE EMISSION
4.1 REQUIREMENT
According to FCC section 15.247(d), in any 100kHz bandwidth outside the frequency band in
which the spread spectrum or digitally modulated intentional radiator is operating, the radio
frequency power that is produced by the intentional radiator shall be at least 20dB below that in
the 100kHz bandwidth within the band that contains the highest level of the desired power, based
on either an RF conducted or a radiated measurement.
4.2 TEST PROCEDURE
Spectrum Parameter
Setting
Detector
Peak
Start/Stop Frequency
30 MHz to 10th carrier harmonic
RB / VB (emission in restricted band)
100 KHz/300 KHz
Trace-Mode:
Max hold
Spectrum Parameter
Setting
Detector
Peak
For Band edge
Start/Stop Frequency
RB / VB (emission in restricted band)
Lower Band Edge: 2300– 2403 MHz
Upper Band Edge: 2479 – 2500 MHz
100 KHz/300 KHz
Trace-Mode:
Max hold
Remark : Hopping on and Hopping off mode all have been tested,only worst case hopping off is
reported.
4.3 TEST SETUP
The EUT is coupled to the Spectrum Analyzer; the RF load attached to the EUT antenna terminal is
50Ohm; the path loss as the factor is calibrated to correct the reading. Make the measurement with
the spectrum analyzer's resolution bandwidth(RBW) = 100 kHz. In order to make an accurate
measurement, set the span greater than RBW.
4.4 EUT OPERATION CONDITIONS
The EUT tested system was configured as the statements of 2.3 Unless otherwise a special
operating condition is specified in the follows during the testing.
Page 31 of 70
Report No.: STS1712370W01
4.5 TEST RESULTS
Temperature:
25℃
Relative Humidity: 50%
Pressure:
1012 hPa
Test Voltage:
Test Mode:
GFSK(1Mbps)-00/39/78 CH
00 CH
39 CH
DC 3.7V
Page 32 of 70
78 CH
Report No.: STS1712370W01
Page 33 of 70
For Band edge
00 CH
78 CH
Report No.: STS1712370W01
Page 34 of 70
For Hopping Band edge
00 CH
78 CH
Report No.: STS1712370W01
Page 35 of 70
Report No.: STS1712370W01
Temperature:
25℃
Relative Humidity: 50%
Pressure:
1012 hPa
Test Voltage:
Test Mode:
π/4-DQPSK(2Mbps) –00/39/78 CH
00 CH
39 CH
DC 3.7V
Page 36 of 70
78 CH
Report No.: STS1712370W01
Page 37 of 70
For Band edge
00 CH
78 CH
Report No.: STS1712370W01
Page 38 of 70
For Hopping Band edge
00 CH
78 CH
Report No.: STS1712370W01
Page 39 of 70
Report No.: STS1712370W01
Temperature:
25℃
Relative Humidity: 50%
Pressure:
1012 hPa
Test Voltage:
Test Mode:
8DPSK(3Mbps) -00/39/78 CH
00 CH
39 CH
DC 3.7V
Page 40 of 70
78 CH
Report No.: STS1712370W01
Page 41 of 70
For Band edge
00 CH
78 CH
Report No.: STS1712370W01
Page 42 of 70
For Hopping Band edge
00 CH
78 CH
Report No.: STS1712370W01
Page 43 of 70
Report No.: STS1712370W01
5. NUMBER OF HOPPING CHANNEL
5.1 APPLIED PROCEDURES / LIMIT
FCC Part 15.247,Subpart C
Section
Test Item
Limit
15.247
(a)(1)(iii)
Number of Hopping
Channel
≥15
Spectrum Parameters
Attenuation
Span Frequency
RB
VB
Detector
Trace
Sweep Time
FrequencyRange
(MHz)
2400-2483.5
Result
PASS
Setting
Auto
> Operating FrequencyRange
100KHz
100KHz
Peak
Max Hold
Auto
5.2 TEST PROCEDURE
a. The EUT was directly connected to the spectrum analyzer and antenna output port as show in
the block diagram below,
b. Spectrum Setting : RBW= 100KHz, VBW=100KHz, Sweep time = Auto.
5.3 TEST SETUP
5.4 EUT OPERATION CONDITIONS
The EUT tested system was configured as the statements of 2.4 Unless otherwise a special
operating condition is specified in the follows during the testing.
Page 44 of 70
Report No.: STS1712370W01
5.5 TEST RESULTS
Temperature:
25℃
Relative Humidity: 60%
Pressure:
1015 hPa
Test Voltage:
Test Mode:
Hopping Mode
Number of Hopping Channel
Hopping channel
DC 3.7V
79
Page 45 of 70
Report No.: STS1712370W01
6. AVERAGE TIME OF OCCUPANCY
6.1 APPLIED PROCEDURES / LIMIT
FCC Part 15.247,Subpart C
Section
Test Item
15.247
(a)(1)(iii)
Average Time
of Occupancy
Limit
0.4sec
FrequencyRange
(MHz)
2400-2483.5
Result
PASS
6.2 TEST PROCEDURE
a. The transmitter output (antenna port) was connected to the spectrum analyzer
b. Set RBW =1MHz/VBW =3MHz.
c. Use a video trigger with the trigger level set to enable triggering only on full pulses.
d. Sweep Time is more than once pulse time.
Set the center frequency on any frequency would be measure and set the frequency span to
e. zero span.
f. Measure the maximum time duration of one single pulse.
g. Set the EUT for DH5, DH3 and DH1 packet transmitting.
h. Measure the maximum time duration of one single pulse.
i. DH5 Packet permit maximum 1600/ 79 / 6 = 3.37 hops per second in each channel (5 time
slots RX, 1 time slot TX). Sothe dwell time is the time duration of the pulse times 3.37 x 31.6
= 106.6 within 31.6 seconds.
j. DH3 Packet permit maximum 1600 / 79 / 4 = 5.06 hops per second in each channel (3 time
slots RX, 1 time slot TX). Sothe dwell time is the time duration of the pulse times 5.06 x 31.6 =
160 within 31.6 seconds.
k. DH1 Packet permit maximum 1600 / 79 /2 = 10.12 hops per second in each channel (1 time
slot RX, 1 time slot TX). So the dwell time is the time duration of the pulse times 10.12 x 31.6 =
320 within 31.6 seconds.
6.3 TEST SETUP
6.4 EUT OPERATION CONDITIONS
The EUT tested system was configured as the statements of 2.4 Unless otherwise a special
operating condition is specified in the follows during the testing.
Page 46 of 70
Report No.: STS1712370W01
6.5 TEST RESULTS
Temperature:
25℃
Relative Humidity: 50%
Pressure:
1012 hPa
Test Voltage:
Test Mode:
GFSK(1Mbps)-DH1/DH3/DH5
DC 3.7V
Data Packet
Frequency
Pulse Duration(ms)
Dwell Time(s)
Limits(s)
DH1
2441 MHz
0.370
0.118
0.4
DH3
2441 MHz
1.630
0.261
0.4
DH5
2441 MHz
2.880
0.307
0.4
Page 47 of 70
CH39-DH1
CH39-DH3
CH39-DH5
Report No.: STS1712370W01
Page 48 of 70
Report No.: STS1712370W01
Temperature:
25℃
Relative Humidity: 50%
Pressure:
1012 hPa
Test Voltage:
Test Mode:
π/4-DQPSK(2Mbps) –2DH1/2DH3/2DH5
DC 3.7V
Data Packet
Frequency
Pulse Duration(ms)
Dwell Time(s)
Limits(s)
2DH1
2441 MHz
0.380
0.122
0.4
2DH3
2441 MHz
1.640
0.262
0.4
2DH5
2441 MHz
2.880
0.307
0.4
Page 49 of 70
CH39-2DH1
CH39-2DH3
CH39-2DH5
Report No.: STS1712370W01
Page 50 of 70
Report No.: STS1712370W01
Temperature:
25℃
Relative Humidity: 50%
Pressure:
1012 hPa
Test Voltage:
Test Mode:
8DPSK(3Mbps) –3DH1/3DH3/3DH5
DC 3.7V
Data Packet
Frequency
Pulse Duration(ms)
Dwell Time(s)
Limits(s)
3DH1
2441 MHz
0.380
0.122
0.4
3DH3
2441 MHz
1.640
0.262
0.4
3DH5
2441 MHz
2.890
0.308
0.4
Page 51 of 70
CH39-3DH1
CH39-3DH3
CH39-3DH5
Report No.: STS1712370W01
Page 52 of 70
Report No.: STS1712370W01
7. HOPPING CHANNEL SEPARATION MEASUREMEN
7.1 APPLIED PROCEDURES / LIMIT
Frequency hopping systems shall have hopping channel carrier frequencies separated by a
minimum of 25 kHz or the 20 dB bandwidth of the hopping channel, whichever is greater.
Alternatively, frequency hopping systems operating in the 2400-2483.5 MHz band may have
hopping channel carrier frequencies that are separated by 25 kHz or two-thirds of the 20 dB
bandwidth of the hopping channel, whichever is greater, provided the systems operate with an
output power no greater than 125 mW.
Spectrum Parameter
Attenuation
Setting
Auto
Span Frequency
> 20 dB Bandwidth or Channel Separation
RB
30 kHz (20dB Bandwidth) / 30 kHz (Channel Separation)
VB
100 kHz (20dB Bandwidth) / 100 kHz (Channel Separation)
Detector
Peak
Trace
Max Hold
Sweep Time
Auto
7.2 TEST PROCEDURE
a. The transmitter output (antenna port) was connected to the spectrum analyser in peak hold
mode.
b. The resolution bandwidth of 30 kHz and the video bandwidth of 100 kHz were utilised for 20
dB bandwidth measurement.
c. The resolution bandwidth of 30 kHz and the video bandwidth of 100 kHz were utilised for
channel separation measurement.
7.3 TEST SETUP
7.4 EUT OPERATION CONDITIONS
The EUT was programmed to be in continuously transmitting mode.
Page 53 of 70
Report No.: STS1712370W01
7.5 TEST RESULTS
Temperature:
25℃
Relative Humidity: 50%
Pressure:
1012 hPa
Test Voltage:
Test Mode:
CH00 / CH39 / CH78 (GFSK(1Mbps) Mode)
DC 3.7V
Frequency
Ch. Separation
(MHz)
Limit
Result
2402 MHz
0.999
0.502
Complies
2441 MHz
0.999
0.501
Complies
2480 MHz
0.999
0.497
Complies
For GFSK: Ch. Separation Limits: > two-thirds 20dB bandwidth
CH00 -1Mbps
Page 54 of 70
CH39 -1Mbps
CH78 -1Mbps
Report No.: STS1712370W01
Page 55 of 70
Report No.: STS1712370W01
Temperature:
25℃
Relative Humidity: 50%
Pressure:
1012 hPa
Test Voltage:
Test Mode:
CH00 / CH39 / CH78 (π/4-DQPSK(2Mbps) Mode)
DC 3.7V
Frequency
Ch. Separation
(MHz)
Limit
Result
2402 MHz
0.999
0.802
Complies
2441 MHz
1.002
0.803
Complies
2480 MHz
0.999
0.803
Complies
For π/4-DQPSK(2Mbps): Ch. Separation Limits: > two-thirds 20dB bandwidth
CH00 -2Mbps
Page 56 of 70
CH39 -2Mbps
CH78 -2Mbps
Report No.: STS1712370W01
Page 57 of 70
Report No.: STS1712370W01
Temperature:
25℃
Relative Humidity: 50%
Pressure:
1012 hPa
Test Voltage:
Test Mode:
CH00 / CH39 / CH78 (8DPSK(3Mbps)Mode)
DC 3.7V
Frequency
Ch. Separation
(MHz)
Limit
Result
2402 MHz
0.999
0.808
Complies
2441 MHz
1.002
0.808
Complies
2480 MHz
1.002
0.809
Complies
For 8DPSK(3Mbps):Ch. Separation Limits: > two-thirds 20dB bandwidth
CH00 -3Mbps
Page 58 of 70
CH39 -3Mbps
CH78 -3Mbps
Report No.: STS1712370W01
Page 59 of 70
Report No.: STS1712370W01
8. BANDWIDTH TEST
8.1 APPLIED PROCEDURES / LIMIT
FCC Part15 15.247,Subpart C
Section
15.247
(a)(1)
Test Item
Limit
Bandwidth
(20dB bandwidth)
Spectrum Parameter
Attenuation
Span Frequency
RB
VB
Detector
Trace
Sweep Time
FrequencyRange
(MHz)
2400-2483.5
Result
PASS
Setting
Auto
> Measurement Bandwidth or Channel Separation
30 kHz (20dB Bandwidth) / 30 kHz (Channel Separation)
100 kHz (20dB Bandwidth) / 100 kHz (Channel Separation)
Peak
Max Hold
Auto
8.2 TEST PROCEDURE
a. The EUT was directly connected to the spectrum analyzer and antenna output port as show in
the block diagram below,
b. Spectrum Setting : RBW= 30KHz, VBW=100KHz, Sweep time = Auto.
8.3 TEST SETUP
8.4 EUT OPERATION CONDITIONS
The EUT tested system was configured as the statements of 2.4 Unless otherwise a special
operating condition is specified in the follows during the testing.
Page 60 of 70
Report No.: STS1712370W01
8.5 TEST RESULTS
Temperature:
25℃
Relative Humidity: 50%
Pressure:
1012 hPa
Test Voltage:
Test Mode:
GFSK(1Mbps)CH00 / CH39 / C78
DC 3.7V
Frequency
20dB Bandwidth
(MHz)
Result
2402 MHz
0.753
PASS
2441 MHz
0.752
PASS
2480 MHz
0.746
PASS
CH00 -1Mbps
Page 61 of 70
CH39 -1Mbps
CH78 -1Mbps
Report No.: STS1712370W01
Page 62 of 70
Report No.: STS1712370W01
Temperature:
25℃
Relative Humidity: 50%
Pressure:
1012 hPa
Test Voltage:
Test Mode:
π/4-DQPSK(2Mbps)CH00 / CH39 / C78
DC 3.7V
Frequency
20dB Bandwidth(MHz)
Result
2402 MHz
1.203
PASS
2441 MHz
1.205
PASS
2480 MHz
1.204
PASS
CH00 -2Mbps
Page 63 of 70
CH39 -2Mbps
CH78 -2Mbps
Report No.: STS1712370W01
Page 64 of 70
Report No.: STS1712370W01
Temperature:
25℃
Relative Humidity: 50%
Pressure:
1012 hPa
Test Voltage:
Test Mode:
8DPSK(3Mbps)CH00 / CH39 / CH78
DC 3.7V
Frequency
20dB Bandwidth
(MHz)
Result
2402 MHz
1.212
PASS
2441 MHz
1.212
PASS
2480 MHz
1.213
PASS
CH00 -3Mbps
Page 65 of 70
CH39 -3Mbps
CH78 -3Mbps
Report No.: STS1712370W01
Page 66 of 70
Report No.: STS1712370W01
9. OUTPUT POWER TEST
9.1 APPLIED PROCEDURES / LIMIT
FCC Part 15.247,Subpart C
Section
Test Item
Limit
FrequencyRange
(MHz)
Result
1 W or 0.125W
15.247
(a)(1)&(b)(1)
Output
Power
if channel separation >
2/3 bandwidthprovided
thesystems operatewith an
output power no greater
than125 mW(20.97dBm)
2400-2483.5
PASS
9.2 TEST PROCEDURE
a. The EUT was directly connected to the Power Meter
9.3 TEST SETUP
EUT
Power meter
9.4 EUT OPERATION CONDITIONS
The EUT tested system was configured as the statements of 2.4 Unless otherwise a special
operating condition is specified in the follows during the testing.
Page 67 of 70
Report No.: STS1712370W01
9.5 TEST RESULTS
Temperature:
25℃
Relative Humidity: 60%
Pressure:
1012 hPa
Test Voltage:
DC 3.7V
GFSK(1Mbps)
Test Channel
Frequency
Conducted Output Power
LIMIT
(MHz)
Peak (dBm)
AVG (dBm)
dBm
CH00
2402
5.01
0.98
20.97
CH39
2441
5.03
1.01
20.97
CH78
2480
5.12
1.09
20.97
Note: the channel separation >2/3 bandwidth
π/4QPSK(2Mbps)
Test Channel
Frequency
Conducted Output Power
LIMIT
(MHz)
Peak (dBm)
AVG (dBm)
dBm
CH00
2402
4.38
0.37
20.97
CH39
2441
4.41
0.40
20.97
CH78
2480
4.52
0.51
20.97
Note: the channel separation >2/3 bandwidth
8DPSK(3Mbps)
Test Channel
Frequency
Conducted Output Power
LIMIT
(MHz)
Peak (dBm)
AVG (dBm)
dBm
CH00
2402
4.43
0.41
20.97
CH39
2441
4.48
0.46
20.97
CH78
2480
4.41
0.39
20.97
Note: the channel separation >2/3 bandwidth
Page 68 of 70
Report No.: STS1712370W01
10. ANTENNA REQUIREMENT
10.1 STANDARD REQUIREMENT
15.203 requirement: For intentional device, according to 15.203: an intentional radiator shall
be designed to ensure that no antenna other than that furnished by the responsible party
shall be used with the device.
10.2 EUT ANTENNA
The EUT antenna is PCB Antenna. It comply with the standard requirement.
Page 69 of 70
APPENDIX-PHOTOS OF TEST SETUP
Radiated Measurement Photos
Report No.: STS1712370W01
Page 70 of 70
Report No.: STS1712370W01
Conducted Measurement Photos
※※※※※END OF THE REPORT※※※※※

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Kent
Create Date                     : 2018:01:04 07:13:27+08:00
Modify Date                     : 2018:01:08 16:42:18+08:00
Language                        : zh-CN
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : Kent
Title                           : Measurement Report
Creator Tool                    : Microsoft? Office Word 2007
Metadata Date                   : 2018:01:08 16:42:18+08:00
Producer                        : Microsoft? Office Word 2007
Document ID                     : uuid:460c70c5-e720-4cf3-8ae6-b7ea870b0e51
Instance ID                     : uuid:f209b72c-d10d-454f-936d-939e82f030e8
Page Count                      : 70