FCC ID 2AOV3QI-150P
WAH0001
by Hitachi Information & Telecommunication Engineering, Ltd.
Grantee Code: 2AOV3 Product Code: QI150P
Latest application date: 2018-09-19
FCC ID Device Details
| FCC ID | 2AOV3QI-150P |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AOV3 |
| Product Code | QI150P |
| Applicant Business | Hitachi Information & Telecommunication Engineering, Ltd. 🇯🇵 |
| Related Domains |  hitachi.com  dekra.com |
| Equipment Class | WAH0001 |
| Test Firm | DEKRA TESTING AND CERTIFICATION Lin Kou Lab. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-09-19 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-09-19 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2018-09-19 |
| 58320-62640 MHz | Class II permissive change or modification of presently authorized equipment | 2018-09-19 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCA9008-TBD1 Grant Date: 08/17/2015 | 2018-07-25 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCA9008-TBD1 Grant Date: 08/17/2015 | 2018-07-25 |
| 58320-62640 MHz | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCA9008-TBD1 Grant Date: 08/17/2015 | 2018-07-25 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCA9008-TBD1 Grant Date: 08/17/2015 | 2018-07-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2018-07-25 | PDF 97.3 KB |
| External photo | External Photos | 2019-03-03 | PDF 1.8 MB |
| External Photos | External Photos | 2018-07-25 | PDF 637.3 KB |
| ID Label | ID Label/Location Info | 2018-07-25 | PDF 109.1 KB |
| ID label | ID Label/Location Info | 2018-07-25 | PDF 109.1 KB |
| Label Location | ID Label/Location Info | 2018-07-25 | PDF 264.3 KB |
| Test setup photo | Test Setup Photos | 2019-03-03 | PDF 1.1 MB |
| Test Report_NII_Part 1 | Test Report | 2018-09-19 | PDF 4.4 MB |
| Test Report_NII_Part 2 | Test Report | 2018-09-19 | PDF 1.8 MB |
| Test report_BLE | Test Report | 2018-09-19 | PDF 1.4 MB |
| Test report_DSS | Test Report | 2018-09-19 | PDF 1.5 MB |
| Test report_WLAN | Test Report | 2018-09-19 | PDF 3.9 MB |
| ATTESTATION | Cover Letter(s) | 2018-09-19 | PDF 123.9 KB |
| ATTESTATION | Cover Letter(s) | 2018-07-25 | PDF 102.5 KB |
| Class II Change | Cover Letter(s) | 2018-09-19 | PDF 22.6 KB |
| Declaration of authorization | Cover Letter(s) | 2018-09-19 | PDF 462.4 KB |
| confidentiality | Cover Letter(s) | 2018-09-19 | PDF 263.3 KB |
| Declaration letter for electrically identical_FCC | Cover Letter(s) | 2018-07-25 | PDF 540.9 KB |
| FCC Auth Ltr Change of ID | Cover Letter(s) | 2018-07-25 | PDF 48.6 KB |
| MPE | RF Exposure Info | 2018-09-19 | PDF 72.4 KB |
Application Information
| Application ID | Yx3AaIN0eBlebNxizFhd7Q== |
|---|---|
| Final Action Date | 2018-09-19 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0027168301 |
| Model | QI-150P |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WAH0001 |
| Responsible Party | Tomoki Kozono, Manager, tomoki.kozono.yu@hitachi.com , +81-50-3032-8766 |
| Technical Contact | Valentina Wu, DEKRA Testing and Certification Co., Ltd., valentina.wu@dekra.com , 886-2-2602-7968 |
| Non-Technical Contact | Valentina Wu, DEKRA Testing and Certification Co., Ltd., valentina.wu@dekra.com , 886-2-2602-7968 |
| Test Firm | Vincent Lin, DEKRA TESTING AND CERTIFICATION Lin Kou Lab., vincent.lin@dekra.com , 886286013788 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/03/2019 |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC: 1. Reduce the output power of Bluetooth by firmware. 2. Add one new antenna of WLAN and Bluetooth with different type and lower gain. The added antenna is used for mobile devices and is not allowed in portable devices except with additional RF exposure evaluation and certification. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2.5 cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are < 0.1 W/kg and < 0.1 W/kg respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Yx3AaIN0eBlebNxizFhd7Q== | 2018-09-19 | Class II permissive change or modification of presently authorized equipment |
| Q30ez45EL1i/98fn+DdhyQ== | 2018-09-19 | Class II permissive change or modification of presently authorized equipment |
| 7psF8OpHohMJzeBnpVQXug== | 2018-09-19 | Class II permissive change or modification of presently authorized equipment |
| 5s+dA5F5Re2eAI8fHOnApA== | 2018-09-19 | Class II permissive change or modification of presently authorized equipment |
| vjBLVhPDsnBpLr4rqQApnA== | 2018-07-25 | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCA9008-TBD1 Grant Date: 08/17/2015 |
| l+UrI3bKGIwRuA6TfWUzvg== | 2018-07-25 | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCA9008-TBD1 Grant Date: 08/17/2015 |
| UdR15i5CNCnMcjjfK/nuQA== | 2018-07-25 | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCA9008-TBD1 Grant Date: 08/17/2015 |
| LsoBfBrDPLfVPLJ0eEDl5A== | 2018-07-25 | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCA9008-TBD1 Grant Date: 08/17/2015 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.013 | 15C | CC |
| 2402-2480 MHz | 0.002 | 15C | CC, MO |
| 2402-2480 MHz | 0.002 | 15C | CC |
| 2402-2480 MHz | 0.009 | 15C | CC |
| 2412-2472 MHz | 0.44 | 15C | CC, MO |
| 2422-2462 MHz | 0.417 | 15C | CC, MO |
| 5190-5230 MHz | 0.057 | 15E | 38, CC, MO |
| 5210 MHz | 0.012 | 15E | 38, CC, MO |
| 5260-5320 MHz | 0.075 | 15E | 38, CC, MO |
| 5270-5310 MHz | 0.057 | 15E | 38, CC, MO |
| 5290 MHz | 0.014 | 15E | 38, CC, MO |
| 5500-5720 MHz | 0.07 | 15E | 38, CC, MO |
| 5510-5710 MHz | 0.055 | 15E | 38, CC, MO |
| 5530-5690 MHz | 0.037 | 15E | 38, CC, MO |
| 5745-5825 MHz | 0.071 | 15E | 38, CC, MO |
| 5755-5795 MHz | 0.044 | 15E | 38, CC, MO |
| 5775 MHz | 0.013 | 15E | 38, CC, MO |
| 58320-62640 MHz | 0.0380000 | 15C | CC |
| 58320-62640 MHz | 0.0380000 | 15C |
Grants
TCB Grant - Application Yx3AaIN0eBlebNxizFhd7Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 09/19/2018 Application Dated: 09/03/2018 |
| Hitachi Information & Telecommunication Engineering, Ltd. |
| Queen's Tower B 22F, 2-3-3, Minatomirai, Nishi-ku, |
| Yokohama, 220-6122 Japan |
| Attention: Tomoki Kozono , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOV3QI-150P |
| Name of Grantee: | Hitachi Information & Telecommunication Engineering, Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WAH0001 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.44 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.417 |
| C2PC: 1. Reduce the output power of Bluetooth by firmware. 2. Add one new antenna of WLAN and Bluetooth with different type and lower gain. The added antenna is used for mobile devices and is not allowed in portable devices except with additional RF exposure evaluation and certification. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2.5 cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are < 0.1 W/kg and < 0.1 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Yx3AaIN0eBlebNxizFhd7Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hitachi Information & Telecommunication Engineering, Ltd. Queen's Tower B 22F, 2-3-3, Minatomirai, Nishi-ku, Yokohama, 220-6122 Japan |
Date of Grant: 09/19/2018 Application Dated: 09/03/2018 |
| Attention: Tomoki Kozono , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOV3QI-150P |
| Name of Grantee: | Hitachi Information & Telecommunication Engineering, Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WAH0001 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.44 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.417 |
| C2PC: 1. Reduce the output power of Bluetooth by firmware. 2. Add one new antenna of WLAN and Bluetooth with different type and lower gain. The added antenna is used for mobile devices and is not allowed in portable devices except with additional RF exposure evaluation and certification. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2.5 cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are < 0.1 W/kg and < 0.1 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 07/25/2018 Application Dated: 07/24/2018 |
| Hitachi Information & Telecommunication Engineering, Ltd. |
| Queen's Tower B 22F, 2-3-3, Minatomirai, Nishi-ku, |
| Yokohama, 220-6122 Japan |
| Attention: Tomoki Kozono , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOV3QI-150P |
| Name of Grantee: | Hitachi Information & Telecommunication Engineering, Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WAH0001 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.44 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.417 |
| Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2.5 cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are < 0.1 W/kg and < 0.1 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application vjBLVhPDsnBpLr4rqQApnA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hitachi Information & Telecommunication Engineering, Ltd. Queen's Tower B 22F, 2-3-3, Minatomirai, Nishi-ku, Yokohama, 220-6122 Japan |
Date of Grant: 07/25/2018 Application Dated: 07/24/2018 |
| Attention: Tomoki Kozono , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOV3QI-150P |
| Name of Grantee: | Hitachi Information & Telecommunication Engineering, Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WAH0001 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.44 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.417 |
| Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2.5 cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are < 0.1 W/kg and < 0.1 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 07/25/2018 Application Dated: 07/24/2018 |
| Hitachi Information & Telecommunication Engineering, Ltd. |
| Queen's Tower B 22F, 2-3-3, Minatomirai, Nishi-ku, |
| Yokohama, 220-6122 Japan |
| Attention: Tomoki Kozono , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOV3QI-150P |
| Name of Grantee: | Hitachi Information & Telecommunication Engineering, Ltd. |
| Equipment Class: | Part 15 Low Power Transceiver, Rx Verified |
| Notes: | WAH0001 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 58320.0 - 62640.0 | 0.038 |
| Output power listed is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable RF exposure category configurations (i.e. antenna to persons separation less than 20 cm) is not allowed. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
EAS Grant - Application UdR15i5CNCnMcjjfK/nuQA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hitachi Information & Telecommunication Engineering, Ltd. Queen's Tower B 22F, 2-3-3, Minatomirai, Nishi-ku, Yokohama, 220-6122 Japan |
Date of Grant: 07/25/2018 Application Dated: 07/24/2018 |
| Attention: Tomoki Kozono , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOV3QI-150P |
| Name of Grantee: | Hitachi Information & Telecommunication Engineering, Ltd. |
| Equipment Class: | Part 15 Low Power Transceiver, Rx Verified |
| Notes: | WAH0001 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 58320.0 - 62640.0 | 0.038 |
| Output power listed is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable RF exposure category configurations (i.e. antenna to persons separation less than 20 cm) is not allowed. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 09/19/2018 Application Dated: 09/03/2018 |
| Hitachi Information & Telecommunication Engineering, Ltd. |
| Queen's Tower B 22F, 2-3-3, Minatomirai, Nishi-ku, |
| Yokohama, 220-6122 Japan |
| Attention: Tomoki Kozono , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOV3QI-150P |
| Name of Grantee: | Hitachi Information & Telecommunication Engineering, Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WAH0001 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| C2PC: 1. Reduce the output power of Bluetooth by firmware. 2. Add one new antenna of WLAN and Bluetooth with different type and lower gain. The added antenna is used for mobile devices and is not allowed in portable devices except with additional RF exposure evaluation and certification. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.17 W/kg and 0.17 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Q30ez45EL1i/98fn+DdhyQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hitachi Information & Telecommunication Engineering, Ltd. Queen's Tower B 22F, 2-3-3, Minatomirai, Nishi-ku, Yokohama, 220-6122 Japan |
Date of Grant: 09/19/2018 Application Dated: 09/03/2018 |
| Attention: Tomoki Kozono , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOV3QI-150P |
| Name of Grantee: | Hitachi Information & Telecommunication Engineering, Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WAH0001 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| C2PC: 1. Reduce the output power of Bluetooth by firmware. 2. Add one new antenna of WLAN and Bluetooth with different type and lower gain. The added antenna is used for mobile devices and is not allowed in portable devices except with additional RF exposure evaluation and certification. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.17 W/kg and 0.17 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 07/25/2018 Application Dated: 07/24/2018 |
| Hitachi Information & Telecommunication Engineering, Ltd. |
| Queen's Tower B 22F, 2-3-3, Minatomirai, Nishi-ku, |
| Yokohama, 220-6122 Japan |
| Attention: Tomoki Kozono , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOV3QI-150P |
| Name of Grantee: | Hitachi Information & Telecommunication Engineering, Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WAH0001 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.074 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.057 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.012 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.075 | ||
| 38 CC MO | 15E | 5270.0 - 5310.0 | 0.057 | ||
| 38 CC MO | 15E | 5290.0 - 5290.0 | 0.014 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.07 | ||
| 38 CC MO | 15E | 5510.0 - 5710.0 | 0.055 | ||
| 38 CC MO | 15E | 5530.0 - 5690.0 | 0.037 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.071 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.044 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.013 |
| Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2.5 cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.17 W/kg and 0.17 W/kg respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application LsoBfBrDPLfVPLJ0eEDl5A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hitachi Information & Telecommunication Engineering, Ltd. Queen's Tower B 22F, 2-3-3, Minatomirai, Nishi-ku, Yokohama, 220-6122 Japan |
Date of Grant: 07/25/2018 Application Dated: 07/24/2018 |
| Attention: Tomoki Kozono , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOV3QI-150P |
| Name of Grantee: | Hitachi Information & Telecommunication Engineering, Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WAH0001 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.074 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.057 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.012 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.075 | ||
| 38 CC MO | 15E | 5270.0 - 5310.0 | 0.057 | ||
| 38 CC MO | 15E | 5290.0 - 5290.0 | 0.014 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.07 | ||
| 38 CC MO | 15E | 5510.0 - 5710.0 | 0.055 | ||
| 38 CC MO | 15E | 5530.0 - 5690.0 | 0.037 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.071 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.044 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.013 |
| Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2.5 cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.17 W/kg and 0.17 W/kg respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 07/25/2018 Application Dated: 07/24/2018 |
| Hitachi Information & Telecommunication Engineering, Ltd. |
| Queen's Tower B 22F, 2-3-3, Minatomirai, Nishi-ku, |
| Yokohama, 220-6122 Japan |
| Attention: Tomoki Kozono , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOV3QI-150P |
| Name of Grantee: | Hitachi Information & Telecommunication Engineering, Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WAH0001 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.17 W/kg and 0.17 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application l+UrI3bKGIwRuA6TfWUzvg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hitachi Information & Telecommunication Engineering, Ltd. Queen's Tower B 22F, 2-3-3, Minatomirai, Nishi-ku, Yokohama, 220-6122 Japan |
Date of Grant: 07/25/2018 Application Dated: 07/24/2018 |
| Attention: Tomoki Kozono , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOV3QI-150P |
| Name of Grantee: | Hitachi Information & Telecommunication Engineering, Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WAH0001 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.17 W/kg and 0.17 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 09/19/2018 Application Dated: 09/03/2018 |
| Hitachi Information & Telecommunication Engineering, Ltd. |
| Queen's Tower B 22F, 2-3-3, Minatomirai, Nishi-ku, |
| Yokohama, 220-6122 Japan |
| Attention: Tomoki Kozono , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOV3QI-150P |
| Name of Grantee: | Hitachi Information & Telecommunication Engineering, Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WAH0001 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.074 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.057 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.012 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.075 | ||
| 38 CC MO | 15E | 5270.0 - 5310.0 | 0.057 | ||
| 38 CC MO | 15E | 5290.0 - 5290.0 | 0.014 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.07 | ||
| 38 CC MO | 15E | 5510.0 - 5710.0 | 0.055 | ||
| 38 CC MO | 15E | 5530.0 - 5690.0 | 0.037 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.071 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.044 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.013 |
| C2PC: 1. Reduce the output power of Bluetooth by firmware. 2. Add one new antenna of WLAN and Bluetooth with different type and lower gain. The added antenna is used for mobile devices and is not allowed in portable devices except with additional RF exposure evaluation and certification. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2.5 cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.17 W/kg and 0.17 W/kg respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 7psF8OpHohMJzeBnpVQXug==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hitachi Information & Telecommunication Engineering, Ltd. Queen's Tower B 22F, 2-3-3, Minatomirai, Nishi-ku, Yokohama, 220-6122 Japan |
Date of Grant: 09/19/2018 Application Dated: 09/03/2018 |
| Attention: Tomoki Kozono , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOV3QI-150P |
| Name of Grantee: | Hitachi Information & Telecommunication Engineering, Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WAH0001 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.074 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.057 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.012 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.075 | ||
| 38 CC MO | 15E | 5270.0 - 5310.0 | 0.057 | ||
| 38 CC MO | 15E | 5290.0 - 5290.0 | 0.014 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.07 | ||
| 38 CC MO | 15E | 5510.0 - 5710.0 | 0.055 | ||
| 38 CC MO | 15E | 5530.0 - 5690.0 | 0.037 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.071 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.044 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.013 |
| C2PC: 1. Reduce the output power of Bluetooth by firmware. 2. Add one new antenna of WLAN and Bluetooth with different type and lower gain. The added antenna is used for mobile devices and is not allowed in portable devices except with additional RF exposure evaluation and certification. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2.5 cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.17 W/kg and 0.17 W/kg respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 09/19/2018 Application Dated: 09/03/2018 |
| Hitachi Information & Telecommunication Engineering, Ltd. |
| Queen's Tower B 22F, 2-3-3, Minatomirai, Nishi-ku, |
| Yokohama, 220-6122 Japan |
| Attention: Tomoki Kozono , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOV3QI-150P |
| Name of Grantee: | Hitachi Information & Telecommunication Engineering, Ltd. |
| Equipment Class: | Part 15 Low Power Transceiver, Rx Verified |
| Notes: | WAH0001 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 58320.0 - 62640.0 | 0.038 |
| C2PC: 1. Reduce the output power of Bluetooth by firmware. 2. Add one new antenna of WLAN and Bluetooth with different type and lower gain. The added antenna is used for mobile devices and is not allowed in portable devices except with additional RF exposure evaluation and certification. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.17 W/kg and 0.17 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 5s+dA5F5Re2eAI8fHOnApA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hitachi Information & Telecommunication Engineering, Ltd. Queen's Tower B 22F, 2-3-3, Minatomirai, Nishi-ku, Yokohama, 220-6122 Japan |
Date of Grant: 09/19/2018 Application Dated: 09/03/2018 |
| Attention: Tomoki Kozono , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOV3QI-150P |
| Name of Grantee: | Hitachi Information & Telecommunication Engineering, Ltd. |
| Equipment Class: | Part 15 Low Power Transceiver, Rx Verified |
| Notes: | WAH0001 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 58320.0 - 62640.0 | 0.038 |
| C2PC: 1. Reduce the output power of Bluetooth by firmware. 2. Add one new antenna of WLAN and Bluetooth with different type and lower gain. The added antenna is used for mobile devices and is not allowed in portable devices except with additional RF exposure evaluation and certification. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.17 W/kg and 0.17 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |