FCC ID 2AOVI-KNOX-RAS
Radio Module
by Knox Company
Grantee Code: 2AOVI Product Code: KNOXRAS
Latest application date: 2022-10-27
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2022-10-27 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2022-04-22 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2019-11-27 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2018-03-05 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-CC3100MODR1 Grant Date: 10/09/2014 | 2018-02-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2022-10-27 | PDF 304.9 KB |
| Antenna Info 1 | Users Manual | 2022-04-22 | PDF 595.7 KB |
| Antenna Info 2 | Users Manual | 2022-04-22 | PDF 1,000.7 KB |
| Antenna Info 3 | Users Manual | 2022-04-22 | PDF 111.8 KB |
| Antenna Info 4 | Users Manual | 2022-04-22 | PDF 1,000.7 KB |
| Users Manual | Users Manual | 2022-04-22 | PDF 318.5 KB |
| Users Manual | Users Manual | 2019-11-27 | PDF 417.2 KB |
| Users Manual | Users Manual | 2018-03-05 | PDF 170.9 KB |
| Internal Photos | Internal Photos | 2018-02-27 | PDF 104.5 KB |
| External Photos | External Photos | 2022-04-22 | PDF 336.6 KB |
| External Photos | External Photos | 2019-11-27 | PDF 323.8 KB |
| External Photos | External Photos | 2018-02-27 | PDF 63.9 KB |
| ID Label | ID Label/Location Info | 2022-10-27 | PDF 285.1 KB |
| ID Label and Location Info | ID Label/Location Info | 2022-10-27 | PDF 268 KB |
| ID Label and Location | ID Label/Location Info | 2018-02-27 | PDF 41.5 KB |
| Test Setup Photos | Test Setup Photos | 2019-11-27 | PDF 516.6 KB |
| Test Report | Test Report | 2022-10-27 | PDF 907.9 KB |
| Test Report | Test Report | 2022-04-22 | PDF 782.4 KB |
| Test Report | Test Report | 2019-11-27 | PDF 1.2 MB |
| Test Report | Test Report | 2018-03-05 | PDF 395 KB |
| Authorization Letter | Cover Letter(s) | 2022-10-27 | PDF 288.8 KB |
| Confidentiality Request | Cover Letter(s) | 2022-10-27 | PDF 273.8 KB |
| PCII Letter | Cover Letter(s) | 2022-10-27 | PDF 247.7 KB |
| Confidentiality Request | Cover Letter(s) | 2022-04-22 | PDF 78.6 KB |
| PCII Letter | Cover Letter(s) | 2022-04-22 | PDF 86.1 KB |
| Confidentiality Request | Cover Letter(s) | 2019-11-27 | PDF 439.3 KB |
| Modular Approval Letter | Cover Letter(s) | 2019-11-27 | PDF 962.2 KB |
| PCII Letter | Cover Letter(s) | 2019-11-27 | PDF 431.3 KB |
| Power of Attorney Letter | Cover Letter(s) | 2019-11-27 | PDF 288.8 KB |
| Cover Letter | Cover Letter(s) | 2018-03-05 | PDF 447.5 KB |
| Cover Letter | Cover Letter(s) | 2018-02-27 | PDF 385 KB |
| Cover letter | Cover Letter(s) | 2018-02-27 | PDF 39.6 KB |
| RF Exposure Info | RF Exposure Info | 2022-10-27 | PDF 278.8 KB |
| RF Exposure Info | RF Exposure Info | 2018-03-05 | PDF 119.8 KB |
| Block Diagram Metadata only | Block Diagram | PDF 47.1 KB | |
| Schematics Metadata only | Schematics | PDF 2.6 MB | |
| Operational Description Metadata only | Operational Description | PDF 4.7 MB | |
| Operational Description Metadata only | Operational Description | PDF 419.2 KB | |
| Operational Description part 2 Metadata only | Operational Description | PDF 566.9 KB | |
| Operational Description part 3 Metadata only | Operational Description | PDF 303 KB |
Application Information
| Application ID | ar+kZ1YoVUfJhT9pQ5cixQ== |
|---|---|
| Final Action Date | 2022-10-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0027161959 |
| Model | KNOX-RAS |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Radio Module |
| Responsible Party | Bryan Pavlovic, Director of Engineering, bpavlovic@knoxbox.com  , 623-687-2300 |
| Agent | Michelle Michelle Michelle, CKC Certification Services, LLC, TCBinfo@ckc.com  , 209-299-5240 |
| Test Firm | Wendy Fuster, F2 Labs, wfuster@f2labs.com  , 301-253-4500 |
| TCB Email | tcbinfo@ckc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ar+kZ1YoVUfJhT9pQ5cixQ== | 2022-10-27 | Class II permissive change or modification of presently authorized equipment |
| +DpGKNhehw3iKxbiwK9Gyg== | 2022-04-22 | Class II permissive change or modification of presently authorized equipment |
| w0t+feLwUipYNu3AbMFklg== | 2019-11-27 | Class II permissive change or modification of presently authorized equipment |
| 9yYXgkQ7SoudG8inSSqthw== | 2018-03-05 | Class II permissive change or modification of presently authorized equipment |
| SBdQMDMtGJYmuLuGTGi27g== | 2018-02-27 | Change in identification of presently authorized equipment. Original FCC ID: Z64-CC3100MODR1 Grant Date: 10/09/2014 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.0290000 | 15C |
Grants
TCB Grant - Application w0t+feLwUipYNu3AbMFklg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 11/27/2019 Application Dated: 11/25/2019 |
| Knox Company |
| 1601 W. Deer Valley Road |
| Phoenix, AZ 85027 |
| Attention: Bryan Pavlovic , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOVI-KNOX-RAS |
| Name of Grantee: | Knox Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.029 |
| C2PC to add antenna. Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
EAS Grant - Application w0t+feLwUipYNu3AbMFklg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Knox Company 1601 W. Deer Valley Road Phoenix, AZ 85027 United States |
Date of Grant: 11/27/2019 Application Dated: 11/25/2019 |
| Attention: Bryan Pavlovic , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOVI-KNOX-RAS |
| Name of Grantee: | Knox Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.029 |
| C2PC to add antenna. Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 02/27/2018 Application Dated: 02/27/2018 |
| Knox Company |
| 1601 W. Deer Valley Road |
| Phoenix, AZ 85027 |
| Attention: Bryan Pavlovic , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOVI-KNOX-RAS |
| Name of Grantee: | Knox Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.029 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
EAS Grant - Application SBdQMDMtGJYmuLuGTGi27g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Knox Company 1601 W. Deer Valley Road Phoenix, AZ 85027 United States |
Date of Grant: 02/27/2018 Application Dated: 02/27/2018 |
| Attention: Bryan Pavlovic , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOVI-KNOX-RAS |
| Name of Grantee: | Knox Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.029 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 10/27/2022 Application Dated: 10/21/2022 |
| Knox Company |
| 1601 W. Deer Valley Road |
| Phoenix, AZ 85027 |
| Attention: Bryan Pavlovic , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOVI-KNOX-RAS |
| Name of Grantee: | Knox Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.029 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
EAS Grant - Application ar+kZ1YoVUfJhT9pQ5cixQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Knox Company 1601 W. Deer Valley Road Phoenix, AZ 85027 United States |
Date of Grant: 10/27/2022 Application Dated: 10/21/2022 |
| Attention: Bryan Pavlovic , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOVI-KNOX-RAS |
| Name of Grantee: | Knox Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.029 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 03/05/2018 Application Dated: 03/05/2018 |
| Knox Company |
| 1601 W. Deer Valley Road |
| Phoenix, AZ 85027 |
| Attention: Bryan Pavlovic , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOVI-KNOX-RAS |
| Name of Grantee: | Knox Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.029 |
| C2PC for new antenna. Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
EAS Grant - Application 9yYXgkQ7SoudG8inSSqthw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Knox Company 1601 W. Deer Valley Road Phoenix, AZ 85027 United States |
Date of Grant: 03/05/2018 Application Dated: 03/05/2018 |
| Attention: Bryan Pavlovic , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOVI-KNOX-RAS |
| Name of Grantee: | Knox Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.029 |
| C2PC for new antenna. Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 04/22/2022 Application Dated: 04/05/2022 |
| Knox Company |
| 1601 W. Deer Valley Road |
| Phoenix, AZ 85027 |
| Attention: Bryan Pavlovic , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOVI-KNOX-RAS |
| Name of Grantee: | Knox Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.029 |
| C2PC to add antennas. Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
EAS Grant - Application +DpGKNhehw3iKxbiwK9Gyg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Knox Company 1601 W. Deer Valley Road Phoenix, AZ 85027 United States |
Date of Grant: 04/22/2022 Application Dated: 04/05/2022 |
| Attention: Bryan Pavlovic , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AOVI-KNOX-RAS |
| Name of Grantee: | Knox Company |
| Equipment Class: | Digital Transmission System |
| Notes: | Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.029 |
| C2PC to add antennas. Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
| Mail To: |