FCC ID 2AP3N-2018EMDAVL1
UMTS/HSPA+ Module
by Electronic Minds Group SPA
Grantee Code: 2AP3N Product Code: 2018EMDAVL1
Latest application date: 2018-06-28
FCC ID Device Details
| FCC ID | 2AP3N-2018EMDAVL1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AP3N |
| Product Code | 2018EMDAVL1 |
| Applicant Business | Electronic Minds Group SPA 🇨🇱 |
| Related Domains |  e-mindsgroup.com |
| Equipment Class | UMTS/HSPA+ Module |
| Test Firm | Bureau Veritas Consumer Products Services, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 826.4-846.6 MHz | Class II permissive change or modification of presently authorized equipment | 2018-06-28 |
| 826.4-846.6 MHz | Change in identification of presently authorized equipment. Original FCC ID: XMR201510UC20 Grant Date: 11/26/2015 | 2018-06-21 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2018-06-21 | PDF 195.9 KB |
| Host Label | ID Label/Location Info | 2018-06-28 | PDF 80 KB |
| Product Label | ID Label/Location Info | 2018-06-28 | PDF 124.5 KB |
| PCB Test Report | Test Report | 2018-06-28 | PDF 899.5 KB |
| C2PC Letter | Cover Letter(s) | 2018-06-28 | PDF 50.2 KB |
| Product Certification Representative Auth Letter | Cover Letter(s) | 2018-06-28 | PDF 54.5 KB |
| Change of ID Authorization Letter | Cover Letter(s) | 2018-06-21 | PDF 119.9 KB |
| Change of ID Request Letter | Cover Letter(s) | 2018-06-21 | PDF 54.5 KB |
| Product Certification Representative Auth Letter | Cover Letter(s) | 2018-06-21 | PDF 54.1 KB |
Application Information
| Application ID | oBaXtRbBN7DDroF7yl68gw== |
|---|---|
| Final Action Date | 2018-06-28 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0027593581 |
| Model | 2018EMDAVL1 |
| Frequency Range | 826.4-846.6 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | UMTS/HSPA+ Module |
| Responsible Party | Juan Manuel Formento, Product Engineer, juan.formento@e-mindsgroup.com , +1 (317) 2003219 |
| Test Firm | Sarb Shelopal, Bureau Veritas Consumer Products Services, Inc., Sarbjit.Shelopal@bureauveritas.com  , +1 925 963 4420 |
| TCB Email | tcb@siemic.com  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC to add EMD-AVL-001 Host, Whip Antenna. Single Modular Approval. Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 9.92 dBi of WCDMA band V and 9.5 dBi of WCDMA band II for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| oBaXtRbBN7DDroF7yl68gw== | 2018-06-28 | Class II permissive change or modification of presently authorized equipment |
| tDn+GadG5F57dfns1QziuQ== | 2018-06-21 | Change in identification of presently authorized equipment. Original FCC ID: XMR201510UC20 Grant Date: 11/26/2015 |
Equipment Authorization
Grants
TCB Grant - Application tDn+GadG5F57dfns1QziuQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/21/2018 Application Dated: 06/21/2018 |
| Electronic Minds Group SPA |
| Av. del Parque 5339, Office 112 |
| Ciudad Empresarial, Huechuraba |
| Santiago, 8580751 Chile |
| Attention: Juan Formento , Product Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AP3N-2018EMDAVL1 |
| Name of Grantee: | Electronic Minds Group SPA |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UMTS/HSPA+ Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 826.4 - 846.6 | 0.1795 | 0.024 PM | 4M16F9W | |
| 24E | 1852.4 - 1907.6 | 0.2415 | 0.0096 PM | 4M19F9W |
| Modular Approval. Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 9.92 dBi of WCDMA band V and 9.5 dBi of WCDMA band II for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. |
EAS Grant - Application tDn+GadG5F57dfns1QziuQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Electronic Minds Group SPA Av. del Parque 5339, Office 112 Ciudad Empresarial, Huechuraba Santiago, 8580751 Chile |
Date of Grant: 06/21/2018 Application Dated: 06/21/2018 |
| Attention: Juan Formento , Product Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AP3N-2018EMDAVL1 |
| Name of Grantee: | Electronic Minds Group SPA |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UMTS/HSPA+ Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 826.4 - 846.6 | 0.1795 | 0.024 PM | 4M16F9W | |
| 24E | 1852.4 - 1907.6 | 0.2415 | 0.0096 PM | 4M19F9W |
| Modular Approval. Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 9.92 dBi of WCDMA band V and 9.5 dBi of WCDMA band II for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/28/2018 Application Dated: 06/28/2018 |
| Electronic Minds Group SPA |
| Av. del Parque 5339, Office 112 |
| Ciudad Empresarial, Huechuraba |
| Santiago, 8580751 Chile |
| Attention: Juan Formento , Product Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AP3N-2018EMDAVL1 |
| Name of Grantee: | Electronic Minds Group SPA |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UMTS/HSPA+ Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 826.4 - 846.6 | 0.1795 | 0.024 PM | 4M16F9W | |
| 24E | 1852.4 - 1907.6 | 0.2415 | 0.0096 PM | 4M19F9W |
| C2PC to add EMD-AVL-001 Host, Whip Antenna. Single Modular Approval. Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 9.92 dBi of WCDMA band V and 9.5 dBi of WCDMA band II for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. |
EAS Grant - Application oBaXtRbBN7DDroF7yl68gw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Electronic Minds Group SPA Av. del Parque 5339, Office 112 Ciudad Empresarial, Huechuraba Santiago, 8580751 Chile |
Date of Grant: 06/28/2018 Application Dated: 06/28/2018 |
| Attention: Juan Formento , Product Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AP3N-2018EMDAVL1 |
| Name of Grantee: | Electronic Minds Group SPA |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UMTS/HSPA+ Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 826.4 - 846.6 | 0.1795 | 0.024 PM | 4M16F9W | |
| 24E | 1852.4 - 1907.6 | 0.2415 | 0.0096 PM | 4M19F9W |
| C2PC to add EMD-AVL-001 Host, Whip Antenna. Single Modular Approval. Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 9.92 dBi of WCDMA band V and 9.5 dBi of WCDMA band II for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. |
| Mail To: |