FCC ID 2AP6W-WIFI1201

WiFi Module

by Nanjing Magewell Electronics Co., Ltd.

Grantee Code: 2AP6W   Product Code: WIFI1201
Latest application date: 2024-09-12

FCC ID Device Details

FCC ID2AP6W-WIFI1201
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AP6W
Product CodeWIFI1201
Applicant BusinessNanjing Magewell Electronics Co., Ltd. 🇨🇳
Related Domains magewell.com
Equipment ClassWiFi Module
Test FirmGuangdong Asia Hongke Test Technology Limited

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2024-09-12
5180-5210 MHzOriginal Equipment2024-09-12

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2024-09-12PDF 1.1 MB
Internal PhotosInternal Photos2024-09-12PDF 1.1 MB
External PhotosExternal Photos2024-09-12PDF 696.2 KB
Label locationID Label/Location Info2024-09-12PDF 282.4 KB
Test Setup PhotosTest Setup Photos2024-09-12PDF 350.9 KB
Antenna SpecificationTest Report2024-09-12PDF 1.5 MB
Appendix C RF Test Data for 2.4GWIFI_part 1Test Report2024-09-12PDF 4.9 MB
Appendix C RF Test Data for 2.4GWIFI_part 2Test Report2024-09-12PDF 3.7 MB
Appendix D RF Test Data for B1-B3WIFI_part 1Test Report2024-09-12PDF 6 MB
Appendix D RF Test Data for B1-B3WIFI_part 2Test Report2024-09-12PDF 5.6 MB
Appendix E RF Test Data for 5.8GWIFI_part 1Test Report2024-09-12PDF 6 MB
Appendix E RF Test Data for 5.8GWIFI_part 2Test Report2024-09-12PDF 2.9 MB
Test Report- 5.8G WIFITest Report2024-09-12PDF 1.6 MB
Test Report- B1-B3 WiFiTest Report2024-09-12PDF 1.1 MB
Test Report- DFSTest Report2024-09-12PDF 667.3 KB
Test Report-2.4G WiFiTest Report2024-09-12PDF 1 MB
Covered Equipment Attestation_2.911(d)(5)(i) and (ii)Attestation Statements2024-09-12PDF 96.6 KB
US agentAttestation Statements2024-09-12PDF 18.3 KB
FCC Confidentiality request letterCover Letter(s)2024-09-12PDF 138.5 KB
FCC Declaration of Disable WLAN Channel 12 and 13Cover Letter(s)2024-09-12PDF 107 KB
FCC POACover Letter(s)2024-09-12PDF 114.9 KB
FCC UNII Device Declaration Letter-Slaver - with DFSCover Letter(s)2024-09-12PDF 49.5 KB
Request for Single Modular Transmitter ApprovalCover Letter(s)2024-09-12PDF 229.5 KB
FCC RF Exposure MPERF Exposure Info2024-09-12PDF 532 KB
Block diagram Metadata onlyBlock DiagramPDF 274.8 KB
Schematic Metadata onlySchematicsPDF 540.4 KB
Operation Description Metadata onlyOperational DescriptionPDF 822.1 KB
Declaration Letter of Software Security Requirements-Slaver Metadata onlySDR Software/Security Info.PDF 603.5 KB

Application Information

Application IDjM0AKxrbY6xbQMHedbf/nA==
Final Action Date2024-09-12
Application PurposeOriginal Equipment
Applicant FRN0028286342
ModelWIFI1201
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWiFi Module
Responsible PartyXiaoyong Zhu, Product manager, xiaoyong.zhu@magewell.com , +86-025-52070641
Test FirmDarren Ding, Guangdong Asia Hongke Test Technology Limited, darren.ding@aitek.org.cn , 185656258618
TCB Emailjoerdismitzloff@eurofins.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output Power listed is peak conducted. This device supports 2*2 MIMO and supports 802.11n and 802.11ax with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The maximum antenna gain is 4.5dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Applications

Application IDDatePurpose
jM0AKxrbY6xbQMHedbf/nA==2024-09-12Original Equipment
aGEteb4DIGgo7akwF8V8nQ==2024-09-12Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.052200015CCC, MO
5180-5210 MHz0.064315ECC, MO
5290-5320 MHz0.054515ECC, MO
5500-5530 MHz0.039515ECC, MO
5745-5825 MHz0.055715ECC, MO

Grants

TCB Grant - Application jM0AKxrbY6xbQMHedbf/nA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 09/12/2024

Application Dated: 09/12/2024
Nanjing Magewell Electronics Co., Ltd.
14th Floor,Building 3,No.89 Shengli Road,Jiangning
Economic and Technological Development Zone
Nanjing,
China
 
Attention: Xiaoyong Zhu , Product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AP6W-WIFI1201
Name of Grantee:  Nanjing Magewell Electronics Co., Ltd.
Equipment Class: Digital Transmission System
Notes: WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.0522  

Single Modular Approval. Output Power listed is peak conducted. This device supports 2*2 MIMO and supports 802.11n and 802.11ax with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The maximum antenna gain is 4.5dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application jM0AKxrbY6xbQMHedbf/nA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Nanjing Magewell Electronics Co., Ltd.
14th Floor,Building 3,No.89 Shengli Road,Jiangning Economic and Technological Development Zone
Nanjing,
China
  Date of Grant: 09/12/2024

Application Dated: 09/12/2024
 
Attention: Xiaoyong Zhu , Product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AP6W-WIFI1201
Name of Grantee:  Nanjing Magewell Electronics Co., Ltd.
Equipment Class: Digital Transmission System
Notes: WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.0522  

Single Modular Approval. Output Power listed is peak conducted. This device supports 2*2 MIMO and supports 802.11n and 802.11ax with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The maximum antenna gain is 4.5dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application aGEteb4DIGgo7akwF8V8nQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 09/12/2024

Application Dated: 09/12/2024
Nanjing Magewell Electronics Co., Ltd.
14th Floor,Building 3,No.89 Shengli Road,Jiangning
Economic and Technological Development Zone
Nanjing,
China
 
Attention: Xiaoyong Zhu , Product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AP6W-WIFI1201
Name of Grantee:  Nanjing Magewell Electronics Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5210.0 0.0643  
CC MO 15E 5290.0  -  5320.0 0.0545  
CC MO 15E 5500.0  -  5530.0 0.0395  
CC MO 15E 5745.0  -  5825.0 0.0557  

Single Modular Approval. Output power listed is average conducted This device supports 2*2 MIMO and supports 802.11n, 802.11ac and 802.11ax with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The maximum antenna gain is 6.7dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application aGEteb4DIGgo7akwF8V8nQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Nanjing Magewell Electronics Co., Ltd.
14th Floor,Building 3,No.89 Shengli Road,Jiangning Economic and Technological Development Zone
Nanjing,
China
  Date of Grant: 09/12/2024

Application Dated: 09/12/2024
 
Attention: Xiaoyong Zhu , Product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AP6W-WIFI1201
Name of Grantee:  Nanjing Magewell Electronics Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5210.0 0.0643  
CC MO 15E 5290.0  -  5320.0 0.0545  
CC MO 15E 5500.0  -  5530.0 0.0395  
CC MO 15E 5745.0  -  5825.0 0.0557  

Single Modular Approval. Output power listed is average conducted This device supports 2*2 MIMO and supports 802.11n, 802.11ac and 802.11ax with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The maximum antenna gain is 6.7dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: