FCC ID 2APB6-BOT-CDA110
Wireless Communication Module
by CHIPSEN. Co., Ltd
Grantee Code: 2APB6 Product Code: BOTCDA110
Latest application date: 2022-08-18
FCC ID Device Details
| FCC ID | 2APB6-BOT-CDA110 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2APB6 |
| Product Code | BOTCDA110 |
| Applicant Business | CHIPSEN. Co., Ltd 🇰🇷 |
| Related Domains |  chipsen.com |
| Equipment Class | Wireless Communication Module |
| Test Firm | ONETECH Corp. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2022-08-18 |
| 2402-2480 MHz | Original Equipment | 2022-08-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2023-02-14 | PDF 616.5 KB |
| Internal photo | Internal Photos | 2023-02-14 | PDF 439.9 KB |
| External photo | External Photos | 2023-02-14 | PDF 2.1 MB |
| Label | ID Label/Location Info | 2022-08-18 | PDF 327.1 KB |
| Test Setup Photos | Test Setup Photos | 2023-02-14 | PDF 645.8 KB |
| Test Report | Test Report | 2022-08-18 | PDF 2.9 MB |
| Test Report | Test Report | 2022-08-18 | PDF 5.5 MB |
| test report | Test Report | 2022-08-18 | PDF 2.9 MB |
| FCC Family Declaration Letter_rev.1 | Cover Letter(s) | 2022-08-18 | PDF 134 KB |
| FCC Family Declaration Letter_rev.2 | Cover Letter(s) | 2022-08-18 | PDF 134.5 KB |
| FCC Modular Approval Request Rev 3.0_rev1 | Cover Letter(s) | 2022-08-18 | PDF 70.8 KB |
| FCC Short_Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2022-08-18 | PDF 77.8 KB |
| Letter of Authorization | Cover Letter(s) | 2022-08-18 | PDF 12.1 KB |
| Letter of Authorization Rev 2.0 | Cover Letter(s) | 2022-08-18 | PDF 12.1 KB |
| EMF | RF Exposure Info | 2022-08-18 | PDF 184.4 KB |
| Block Metadata only | Block Diagram | PDF 222.9 KB | |
| SCH Metadata only | Schematics | PDF 63.4 KB | |
| OP Metadata only | Operational Description | PDF 24.9 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 145 KB |
Application Information
| Application ID | ruq+HAg6oJrk0rUyXIftYQ== |
|---|---|
| Final Action Date | 2022-08-18 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0027376433 |
| Model | BOT-CDA110 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Wireless Communication Module |
| Responsible Party | Young Min Park, rd@chipsen.com , +82-70-8708-5990 |
| Technical Contact | CHIPSEN. Co., Ltd, rd@chipsen.com |
| Test Firm | Ki Hong Nam, ONETECH Corp., kihong.nam@onetech.co.kr  , 82-31-799-9580 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 02/14/2023 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ruq+HAg6oJrk0rUyXIftYQ== | 2022-08-18 | Original Equipment |
| RXsqOII9got/gMsghr1Ofw== | 2022-08-18 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application RXsqOII9got/gMsghr1Ofw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 08/18/2022 Application Dated: 08/18/2022 |
| CHIPSEN. Co., Ltd |
| B1 C-17, 15, Gyeongin-ro 53-gil, Guro-gu, |
| Seoul, South Korea |
| Attention: Young Min Park |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APB6-BOT-CDA110 |
| Name of Grantee: | CHIPSEN. Co., Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00341 |
| Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application RXsqOII9got/gMsghr1Ofw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
CHIPSEN. Co., Ltd B1 C-17, 15, Gyeongin-ro 53-gil, Guro-gu, Seoul, South Korea |
Date of Grant: 08/18/2022 Application Dated: 08/18/2022 |
| Attention: Young Min Park |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APB6-BOT-CDA110 |
| Name of Grantee: | CHIPSEN. Co., Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Communication Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00341 |
| Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 08/18/2022 Application Dated: 08/18/2022 |
| CHIPSEN. Co., Ltd |
| B1 C-17, 15, Gyeongin-ro 53-gil, Guro-gu, |
| Seoul, South Korea |
| Attention: Young Min Park |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APB6-BOT-CDA110 |
| Name of Grantee: | CHIPSEN. Co., Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Communication Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00323 |
| Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ruq+HAg6oJrk0rUyXIftYQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
CHIPSEN. Co., Ltd B1 C-17, 15, Gyeongin-ro 53-gil, Guro-gu, Seoul, South Korea |
Date of Grant: 08/18/2022 Application Dated: 08/18/2022 |
| Attention: Young Min Park |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APB6-BOT-CDA110 |
| Name of Grantee: | CHIPSEN. Co., Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Communication Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00323 |
| Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |