FCC ID 2APBOAN950

Oven

by Anova Applied Electronics, Inc.

Grantee Code: 2APBO   Product Code: AN950
Latest application date: 2024-09-23

FCC ID Device Details

FCC ID2APBOAN950
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2APBO
Product CodeAN950
Applicant BusinessAnova Applied Electronics, Inc. 🇺🇸
Related Domains anovaculinary.com
Equipment ClassOven
Test FirmIntertek Testing Services (Shanghai FTZ) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2024-09-23
5180-5240 MHzOriginal Equipment2024-09-23

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2024-09-23PDF 3.6 MB
Internal PhotosInternal Photos2024-09-23PDF 836.2 KB
External PhotosExternal Photos2024-09-23PDF 215.5 KB
Label and LocationID Label/Location Info2024-09-23PDF 335.8 KB
Operation DescriptionOperational Description2024-09-23PDF 200.9 KB
Test SetupTest Setup Photos2024-09-23PDF 371.8 KB
2.4G_WIFI_results-1-pdfTest Report2024-09-23PDF 5.6 MB
2.4G_WIFI_results-2-pdfTest Report2024-09-23PDF 4.9 MB
2.4G_WIFI_results-3-pdfTest Report2024-09-23PDF 5.7 MB
2.4G_WIFI_results-4-pdfTest Report2024-09-23PDF 5.7 MB
2.4G_WIFI_results-5-pdfTest Report2024-09-23PDF 1 MB
5G_WIFI_results-1-pdfTest Report2024-09-23PDF 5.6 MB
5G_WIFI_results-2-pdfTest Report2024-09-23PDF 5.4 MB
5G_WIFI_results-3-pdfTest Report2024-09-23PDF 5.3 MB
5G_WIFI_results-4-pdfTest Report2024-09-23PDF 5.4 MB
5G_WIFI_results-5-pdfTest Report2024-09-23PDF 5.6 MB
5G_WIFI_results-6-pdfTest Report2024-09-23PDF 5.7 MB
5G_WIFI_results-7-pdfTest Report2024-09-23PDF 5.7 MB
5G_WIFI_results-8-pdfTest Report2024-09-23PDF 566.2 KB
Appendix A of BLE resultsTest Report2024-09-23PDF 2 MB
Report_15.247-BLETest Report2024-09-23PDF 649.5 KB
Report_15.247-WIFITest Report2024-09-23PDF 711.5 KB
Report_15.407-5G WiFiTest Report2024-09-23PDF 905 KB
Report_DFS_FCC Part 15.407Test Report2024-09-23PDF 854.2 KB
ACB-FORM-FCC-Application-Letters Rev 17 R2 - Covered List AttestationAttestation Statements2024-09-23PDF 107.4 KB
ACB-FORM-FCC-Application-Letters Rev 17 R2 - U.S. Agent Letter for Service of PrAttestation Statements2024-09-23PDF 84.4 KB
ACB-FORM-FCC-Application-Letters-Agency-LetterCover Letter(s)2024-09-23PDF 551.2 KB
ACB-FORM-FCC-Application-Letters-Confidentiality-LetterCover Letter(s)2024-09-23PDF 770 KB
Declaration letter for channel 12 and 13Cover Letter(s)2024-09-23PDF 68.5 KB
Report_FCC_MPERF Exposure Info2024-09-23PDF 287.5 KB
Blcok Diagram Metadata onlyBlock DiagramPDF 136 KB
Schematics-1-pdf Metadata onlySchematicsPDF 4.8 MB
Schematics-2-pdf Metadata onlySchematicsPDF 971.1 KB
SDR or Non-SDR device Cover Letter Metadata onlySDR Software/Security Info.PDF 77.2 KB
Security for sofware Metadata onlySDR Software/Security Info.PDF 146.6 KB

Application Information

Application IDfbpyaJJ++IzP2W/KUQKT6w==
Final Action Date2024-09-23
Application PurposeOriginal Equipment
Applicant FRN0027368265
ModelAN950
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionOven
Responsible PartyGreg Evans, Head of PMO, certifications@anovaculinary.com , +19803072591
AgentEric Eric Eric, Intertek Testing Services Limited Shanghai, eric.yw.li@intertek.com , 02161278265
Technical ContactEric Li, Intertek Testing Services Limited Shanghai, eric.yw.li@intertek.com , 02161278265
Test FirmLeah Xu, Intertek Testing Services (Shanghai FTZ) Co., Ltd., leah.xu@intertek.com , 86-21-61278200
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20MHz and 40MHz bandwidth modes and it also contains 5GHz WiFi transmitters.

Applications

Application IDDatePurpose
fbpyaJJ++IzP2W/KUQKT6w==2024-09-23Original Equipment
Hb80Hp8qm64fbhjs5rsGfg==2024-09-23Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.00215CCC
2412-2462 MHz0.04415CCC, MO
5180-5240 MHz0.0215ECC, MO
5260-5320 MHz0.01415ECC, MO, ND
5500-5700 MHz0.01415ECC, MO, ND
5745-5825 MHz0.01515ECC, MO

Grants

TCB Grant - Application Hb80Hp8qm64fbhjs5rsGfg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 09/23/2024

Application Dated: 09/22/2024
Anova Applied Electronics, Inc.
667 Howard Street
San Francisco, CA 94105
 
Attention: Greg Evans , Head of PMO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APBOAN950
Name of Grantee:  Anova Applied Electronics, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Oven
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.02  
CC MO ND 15E 5260.0  -  5320.0 0.014  
CC MO ND 15E 5500.0  -  5700.0 0.014  
CC MO 15E 5745.0  -  5825.0 0.015  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20MHz, 40MHz and 80 MHz bandwidth modes and it also contains BLE and 2.4 GHz WiFi transmitters.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application Hb80Hp8qm64fbhjs5rsGfg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Anova Applied Electronics, Inc.
667 Howard Street
San Francisco, CA 94105
United States
  Date of Grant: 09/23/2024

Application Dated: 09/22/2024
 
Attention: Greg Evans , Head of PMO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APBOAN950
Name of Grantee:  Anova Applied Electronics, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Oven
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.02  
CC MO ND 15E 5260.0  -  5320.0 0.014  
CC MO ND 15E 5500.0  -  5700.0 0.014  
CC MO 15E 5745.0  -  5825.0 0.015  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20MHz, 40MHz and 80 MHz bandwidth modes and it also contains BLE and 2.4 GHz WiFi transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application fbpyaJJ++IzP2W/KUQKT6w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 09/23/2024

Application Dated: 09/22/2024
Anova Applied Electronics, Inc.
667 Howard Street
San Francisco, CA 94105
 
Attention: Greg Evans , Head of PMO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APBOAN950
Name of Grantee:  Anova Applied Electronics, Inc.
Equipment Class: Digital Transmission System
Notes: Oven
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.044  
CC 15C 2402.0  -  2480.0 0.002  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20MHz and 40MHz bandwidth modes and it also contains 5GHz WiFi transmitters.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application fbpyaJJ++IzP2W/KUQKT6w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Anova Applied Electronics, Inc.
667 Howard Street
San Francisco, CA 94105
United States
  Date of Grant: 09/23/2024

Application Dated: 09/22/2024
 
Attention: Greg Evans , Head of PMO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APBOAN950
Name of Grantee:  Anova Applied Electronics, Inc.
Equipment Class: Digital Transmission System
Notes: Oven
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.044  
CC 15C 2402.0  -  2480.0 0.002  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20MHz and 40MHz bandwidth modes and it also contains 5GHz WiFi transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: