FCC ID 2APBP-CS30

Handheld Smart POS

by Ciontek Technology Corp.

Grantee Code: 2APBP   Product Code: CS30
Latest application date: 2021-06-23

FCC ID Device Details

FCC ID2APBP-CS30
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2APBP
Product CodeCS30
Applicant BusinessCiontek Technology Corp. 🇨🇳
Related Domains kingberry.com.cn
Equipment ClassHandheld Smart POS
Test FirmShenzhen Toby Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
13.56 MHzOriginal Equipment2021-06-23
5180-5240 MHzOriginal Equipment2021-06-23
2402-2480 MHzOriginal Equipment2021-06-23
699.7-715.3 MHzOriginal Equipment2021-06-23
2402-2480 MHzOriginal Equipment2021-06-23

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2021-06-23PDF 335.9 KB
Internal PhotosInternal Photos2021-06-23PDF 1.3 MB
External PhotosExternal Photos2021-06-23PDF 973.7 KB
LabelID Label/Location Info2021-06-23PDF 1.1 MB
Test Setup PhotosTest Setup Photos2021-06-23PDF 784 KB
Report WIFI-UNII Band1Test Report2021-06-23PDF 6 MB
Test ReportTest Report2021-06-23PDF 2.3 MB
Test ReportTest Report2021-06-23PDF 5.7 MB
Test ReportTest Report2021-06-23PDF 2.9 MB
Test Report WIFITest Report2021-06-23PDF 5.6 MB
Test Report1Test Report2021-06-23PDF 5 MB
Test Report10Test Report2021-06-23PDF 4.7 MB
Test Report11Test Report2021-06-23PDF 4.9 MB
Test Report12Test Report2021-06-23PDF 4.9 MB
Test Report13Test Report2021-06-23PDF 2.7 MB
Test Report2Test Report2021-06-23PDF 5 MB
Test Report3Test Report2021-06-23PDF 4.9 MB
Test Report4Test Report2021-06-23PDF 4.7 MB
Test Report5Test Report2021-06-23PDF 4.6 MB
Test Report6Test Report2021-06-23PDF 4.6 MB
Test Report7Test Report2021-06-23PDF 4.6 MB
Test Report8Test Report2021-06-23PDF 4.6 MB
Test Report9Test Report2021-06-23PDF 4.7 MB
Test ReportGSM1Test Report2021-06-23PDF 2.5 MB
Test ReportGSM2Test Report2021-06-23PDF 3.9 MB
Test ReportGSM3Test Report2021-06-23PDF 4.2 MB
Test ReportGSM4Test Report2021-06-23PDF 4.9 MB
Agent Authorization Rev 1.0Cover Letter(s)2021-06-23PDF 16 KB
FCC Short & Long Term Confidentiality Request Rev4Cover Letter(s)2021-06-23PDF 73 KB
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s)2021-06-23PDF 348.3 KB
Model Declaration LetterCover Letter(s)2021-06-23PDF 108.7 KB
SAR REPORT1RF Exposure Info2021-06-23PDF 2.3 MB
SAR REPORT2RF Exposure Info2021-06-23PDF 4.3 MB
SAR REPORT3RF Exposure Info2021-06-23PDF 5.3 MB
SAR REPORT4RF Exposure Info2021-06-23PDF 2.3 MB
Block Diagram Metadata onlyBlock DiagramPDF 70.7 KB
SCH Metadata onlySchematicsPDF 417.2 KB
OP Metadata onlyOperational DescriptionPDF 199.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 199.3 KB
op Metadata onlyOperational DescriptionPDF 199.3 KB
FCC Software Security Requirements for UNII devices Rev 2 Metadata onlySDR Software/Security InfPDF 151.5 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 71.1 KB
Tune-up Power Metadata onlyParts List/Tune Up InfoPDF 190.5 KB

Application Information

Application IDzXKuwRXP7C1mZtxsq3yLZA==
Final Action Date2021-06-23
Application PurposeOriginal Equipment
Applicant FRN0027368331
ModelCS30
Frequency Range13.56 MHz
Equipment ClassDXX - Part 15 Low Power Communication Device Transmitter
Device DescriptionHandheld Smart POS
Responsible PartyHaoping Xing, xinghaoping@kingberry.com.cn , +86 755-86168406
Technical ContactCiontek Technology Corp., xinghaoping@kingberry.com.cn
Test FirmRay Lai, Shenzhen Toby Technology Co., Ltd., toby857@tongbiao.com , ---
TCB Emailcertification@micomlabs.com
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
zXKuwRXP7C1mZtxsq3yLZA==2021-06-23Original Equipment
v0VNL1Z6PzLzgm0t7AOTZw==2021-06-23Original Equipment
POPnNPr2WEZ8BsQnnpk9FA==2021-06-23Original Equipment
BW90oxbdTU/eIdDY3P/KMQ==2021-06-23Original Equipment
+PFKsNOTLi7HMG5B1v6TYQ==2021-06-23Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
13.56 MHz15CCC
699.7-715.3 MHz0.1792.5ppm1M10W7D27
704-711 MHz0.1762.5ppm8M99G7D27
704-711 MHz0.1552.5ppm8M99W7D27
706.5-713.5 MHz0.1742.5ppm4M51G7D27
709-711 MHz0.1652.5ppm8M99G7D27
709-711 MHz0.1632.5ppm8M95W7D27
826.4-846.6 MHz0.1552.5ppm4M15F9W22H
826.5-846.5 MHz0.1742.5ppm4M50W7D22H
829-844 MHz0.1632.5ppm9M02G7D22H
829-844 MHz0.162.5ppm9M02W7D22H
1712.4-1752.6 MHz0.1852.5ppm4M14F9W27
1720-1745 MHz0.1672.5ppm18M0G7D27
1720-1745 MHz0.1842.5ppm18M0W7D27
1850.2-1909.8 MHz0.9272.5ppm245KGXW24E
1850.2-1909.8 MHz0.2452.5ppm245KG7W24E
1850.7-1909.3 MHz0.1882.5ppm1M10W7D24E
1852.4-1907.6 MHz0.1732.5ppm4M14F9W24E
1860-1900 MHz0.1732.5ppm18M0W7D24E
1860-1900 MHz0.1612.5ppm18M0G7D24E
2402-2480 MHz0.003315CCC
2402-2480 MHz0.002600015CCC
2412-2462 MHz0.052215CCC
5180-5240 MHz0.029115E38, CC
5745-5825 MHz0.034515E38, CC

Grants

TCB Grant - Application zXKuwRXP7C1mZtxsq3yLZA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 06/23/2021

Application Dated: 06/23/2021
Ciontek Technology Corp.
B501,Chanxueyan Building Wuhan University,
No.6 Of Yuexing 2nd Road,Nanshan
Shenzhen,
China
 
Attention: Haoping Xing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APBP-CS30
Name of Grantee:  Ciontek Technology Corp.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Handheld Smart POS
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 13.56  -  13.56  


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application zXKuwRXP7C1mZtxsq3yLZA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ciontek Technology Corp.
B501,Chanxueyan Building Wuhan University, No.6 Of Yuexing 2nd Road,Nanshan
Shenzhen,
China
  Date of Grant: 06/23/2021

Application Dated: 06/23/2021
 
Attention: Haoping Xing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APBP-CS30
Name of Grantee:  Ciontek Technology Corp.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Handheld Smart POS
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 13.56  -  13.56  


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application v0VNL1Z6PzLzgm0t7AOTZw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 06/23/2021

Application Dated: 06/23/2021
Ciontek Technology Corp.
B501,Chanxueyan Building Wuhan University,
No.6 Of Yuexing 2nd Road,Nanshan
Shenzhen,
China
 
Attention: Haoping Xing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APBP-CS30
Name of Grantee:  Ciontek Technology Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Handheld Smart POS
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0291  
38 CC 15E 5745.0  -  5825.0 0.0345  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn, hotspot and simultaneous SAR accessory are 0.76 W/kg, 0.77 W/kg and 1.12 W/kg respectively.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application v0VNL1Z6PzLzgm0t7AOTZw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ciontek Technology Corp.
B501,Chanxueyan Building Wuhan University, No.6 Of Yuexing 2nd Road,Nanshan
Shenzhen,
China
  Date of Grant: 06/23/2021

Application Dated: 06/23/2021
 
Attention: Haoping Xing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APBP-CS30
Name of Grantee:  Ciontek Technology Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Handheld Smart POS
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0291  
38 CC 15E 5745.0  -  5825.0 0.0345  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn, hotspot and simultaneous SAR accessory are 0.76 W/kg, 0.77 W/kg and 1.12 W/kg respectively.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application POPnNPr2WEZ8BsQnnpk9FA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 06/23/2021

Application Dated: 06/23/2021
Ciontek Technology Corp.
B501,Chanxueyan Building Wuhan University,
No.6 Of Yuexing 2nd Road,Nanshan
Shenzhen,
China
 
Attention: Haoping Xing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APBP-CS30
Name of Grantee:  Ciontek Technology Corp.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Handheld Smart POS
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0026  

Output power listed is conducted power. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn, hotspot and simultaneous SAR accessory are 0.76 W/kg, 0.77 W/kg and 1.12 W/kg respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application POPnNPr2WEZ8BsQnnpk9FA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ciontek Technology Corp.
B501,Chanxueyan Building Wuhan University, No.6 Of Yuexing 2nd Road,Nanshan
Shenzhen,
China
  Date of Grant: 06/23/2021

Application Dated: 06/23/2021
 
Attention: Haoping Xing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APBP-CS30
Name of Grantee:  Ciontek Technology Corp.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Handheld Smart POS
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0026  

Output power listed is conducted power. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn, hotspot and simultaneous SAR accessory are 0.76 W/kg, 0.77 W/kg and 1.12 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application BW90oxbdTU/eIdDY3P/KMQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 06/23/2021

Application Dated: 06/23/2021
Ciontek Technology Corp.
B501,Chanxueyan Building Wuhan University,
No.6 Of Yuexing 2nd Road,Nanshan
Shenzhen,
China
 
Attention: Haoping Xing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APBP-CS30
Name of Grantee:  Ciontek Technology Corp.
Equipment Class: PCS Licensed Transmitter
Notes: Handheld Smart POS
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.936 2.5  PM 244KGXW
22H 824.2  -  848.8 0.395 2.5  PM 246KG7W
24E 1850.2  -  1909.8 0.927 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.245 2.5  PM 245KG7W
22H 826.4  -  846.6 0.155 2.5  PM 4M15F9W
27 1712.4  -  1752.6 0.185 2.5  PM 4M14F9W
24E 1852.4  -  1907.6 0.173 2.5  PM 4M14F9W
24E 1850.7  -  1909.3 0.188 2.5  PM 1M10W7D
24E 1860.0  -  1900.0 0.161 2.5  PM 18M0G7D
24E 1860.0  -  1900.0 0.173 2.5  PM 18M0W7D
27 1720.0  -  1745.0 0.167 2.5  PM 18M0G7D
27 1720.0  -  1745.0 0.184 2.5  PM 18M0W7D
22H 826.5  -  846.5 0.174 2.5  PM 4M50W7D
22H 829.0  -  844.0 0.163 2.5  PM 9M02G7D
22H 829.0  -  844.0 0.16 2.5  PM 9M02W7D
27 699.7  -  715.3 0.179 2.5  PM 1M10W7D
27 704.0  -  711.0 0.176 2.5  PM 8M99G7D
27 704.0  -  711.0 0.155 2.5  PM 8M99W7D
27 706.5  -  713.5 0.174 2.5  PM 4M51G7D
27 709.0  -  711.0 0.165 2.5  PM 8M99G7D
27 709.0  -  711.0 0.163 2.5  PM 8M95W7D

Power output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn, hotspot and simultaneous SAR accessory are 0.76 W/kg, 0.77 W/kg and 1.12 W/kg respectively.

EAS Grant - Application BW90oxbdTU/eIdDY3P/KMQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ciontek Technology Corp.
B501,Chanxueyan Building Wuhan University, No.6 Of Yuexing 2nd Road,Nanshan
Shenzhen,
China
  Date of Grant: 06/23/2021

Application Dated: 06/23/2021
 
Attention: Haoping Xing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APBP-CS30
Name of Grantee:  Ciontek Technology Corp.
Equipment Class: PCS Licensed Transmitter
Notes: Handheld Smart POS
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.936 2.5  PM 244KGXW
22H 824.2  -  848.8 0.395 2.5  PM 246KG7W
24E 1850.2  -  1909.8 0.927 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.245 2.5  PM 245KG7W
22H 826.4  -  846.6 0.155 2.5  PM 4M15F9W
27 1712.4  -  1752.6 0.185 2.5  PM 4M14F9W
24E 1852.4  -  1907.6 0.173 2.5  PM 4M14F9W
24E 1850.7  -  1909.3 0.188 2.5  PM 1M10W7D
24E 1860.0  -  1900.0 0.161 2.5  PM 18M0G7D
24E 1860.0  -  1900.0 0.173 2.5  PM 18M0W7D
27 1720.0  -  1745.0 0.167 2.5  PM 18M0G7D
27 1720.0  -  1745.0 0.184 2.5  PM 18M0W7D
22H 826.5  -  846.5 0.174 2.5  PM 4M50W7D
22H 829.0  -  844.0 0.163 2.5  PM 9M02G7D
22H 829.0  -  844.0 0.16 2.5  PM 9M02W7D
27 699.7  -  715.3 0.179 2.5  PM 1M10W7D
27 704.0  -  711.0 0.176 2.5  PM 8M99G7D
27 704.0  -  711.0 0.155 2.5  PM 8M99W7D
27 706.5  -  713.5 0.174 2.5  PM 4M51G7D
27 709.0  -  711.0 0.165 2.5  PM 8M99G7D
27 709.0  -  711.0 0.163 2.5  PM 8M95W7D

Power output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn, hotspot and simultaneous SAR accessory are 0.76 W/kg, 0.77 W/kg and 1.12 W/kg respectively.



TCB Grant - Application +PFKsNOTLi7HMG5B1v6TYQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 06/23/2021

Application Dated: 06/23/2021
Ciontek Technology Corp.
B501,Chanxueyan Building Wuhan University,
No.6 Of Yuexing 2nd Road,Nanshan
Shenzhen,
China
 
Attention: Haoping Xing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APBP-CS30
Name of Grantee:  Ciontek Technology Corp.
Equipment Class: Digital Transmission System
Notes: Handheld Smart POS
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0033  
CC 15C 2412.0  -  2462.0 0.0522  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn, hotspot and simultaneous SAR accessory are 0.76 W/kg, 0.77 W/kg and 1.12 W/kg respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application +PFKsNOTLi7HMG5B1v6TYQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ciontek Technology Corp.
B501,Chanxueyan Building Wuhan University, No.6 Of Yuexing 2nd Road,Nanshan
Shenzhen,
China
  Date of Grant: 06/23/2021

Application Dated: 06/23/2021
 
Attention: Haoping Xing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APBP-CS30
Name of Grantee:  Ciontek Technology Corp.
Equipment Class: Digital Transmission System
Notes: Handheld Smart POS
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0033  
CC 15C 2412.0  -  2462.0 0.0522  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn, hotspot and simultaneous SAR accessory are 0.76 W/kg, 0.77 W/kg and 1.12 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: