FCC ID 2APE2-INFPPC

Panel PC

by ETS GEORGES RENAULT

Grantee Code: 2APE2   Product Code: INFPPC
Latest application date: 2022-10-08

FCC ID Device Details

FCC ID2APE2-INFPPC
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2APE2
Product CodeINFPPC
Applicant BusinessETS GEORGES RENAULT 🇫🇷
Related Domains cp.com
Equipment ClassPanel PC
Test FirmShenzhen BCTC Testing Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2022-10-08
5745-5825 MHzOriginal Equipment2022-10-08

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2022-11-23PDF 551 KB
Internal PhotosInternal Photos2022-10-08PDF 2.1 MB
External PhotosExternal Photos2022-10-08PDF 1,019.8 KB
External photoExternal Photos2022-10-08PDF 1,019.8 KB
label&label locationID Label/Location Info2022-10-08PDF 128.2 KB
Test photosTest Setup Photos2022-10-08PDF 355.4 KB
ANT REPORTTest Report2022-10-08PDF 716.1 KB
AntennaTest Report2022-10-08PDF 716.1 KB
Test ReportTest Report2022-10-08PDF 4.9 MB
Test ReportTest Report2022-10-08PDF 5.1 MB
Agent Authorization Rev 1.0Cover Letter(s)2022-10-08PDF 45.9 KB
FCC Short_Long Term Confidentiality Request Rev4.Cover Letter(s)2022-10-08PDF 74.6 KB
FCC Short_Long Term Confidentiality Request Rev4.1Cover Letter(s)2022-10-08PDF 74.6 KB
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s)2022-10-08PDF 37.4 KB
Model DifferenceCover Letter(s)2022-10-08PDF 121.9 KB
RF ExposureRF Exposure Info2022-10-08PDF 246.8 KB
Block Metadata onlyBlock DiagramPDF 289.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 289.4 KB
SCH Metadata onlySchematicsPDF 788.7 KB
OP Metadata onlyOperational DescriptionPDF 215.2 KB
SOFTWARESECURITYREQUIREMENTSFORU-NIIDEVICES Metadata onlySDR Software/Security InfPDF 195.9 KB

Application Information

Application IDgbnn2MSzQNNrBONWnaLJ2A==
Final Action Date2022-10-08
Application PurposeOriginal Equipment
Applicant FRN0027407113
ModelINFPPC
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionPanel PC
Responsible PartyManuel BUTON, Safety and certification officer, manuel.buton@cp.com , +33(0)240802040
Technical ContactETS GEORGES RENAULT, manuel.buton@cp.com
Test FirmAlan Mei, Shenzhen BCTC Testing Co., Ltd., alan.mei@bctc-lab.com.cn , +8675536882589
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date11/23/2022
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
gbnn2MSzQNNrBONWnaLJ2A==2022-10-08Original Equipment
0QzppS9VqNBtvugXf1bdCQ==2022-10-08Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.020000015CCC, MO
5745-5825 MHz0.017000015ECC, MO

Grants

TCB Grant - Application gbnn2MSzQNNrBONWnaLJ2A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 10/08/2022

Application Dated: 10/08/2022
ETS GEORGES RENAULT
38 rue bobby sands
P.O. Box 44800,
saint herblain, 44800
France
 
Attention: Manuel BUTON , Safety and certification officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APE2-INFPPC
Name of Grantee:  ETS GEORGES RENAULT
Equipment Class: Digital Transmission System
Notes: Panel PC
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.02  

Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application gbnn2MSzQNNrBONWnaLJ2A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ETS GEORGES RENAULT
38 rue bobby sands P.O. Box 44800,
saint herblain, 44800
France
  Date of Grant: 10/08/2022

Application Dated: 10/08/2022
 
Attention: Manuel BUTON , Safety and certification officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APE2-INFPPC
Name of Grantee:  ETS GEORGES RENAULT
Equipment Class: Digital Transmission System
Notes: Panel PC
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.02  

Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 0QzppS9VqNBtvugXf1bdCQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 10/08/2022

Application Dated: 10/08/2022
ETS GEORGES RENAULT
38 rue bobby sands
P.O. Box 44800,
saint herblain, 44800
France
 
Attention: Manuel BUTON , Safety and certification officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APE2-INFPPC
Name of Grantee:  ETS GEORGES RENAULT
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Panel PC
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5745.0  -  5825.0 0.017  

Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. This device contains 20, 40 and 80 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 0QzppS9VqNBtvugXf1bdCQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ETS GEORGES RENAULT
38 rue bobby sands P.O. Box 44800,
saint herblain, 44800
France
  Date of Grant: 10/08/2022

Application Dated: 10/08/2022
 
Attention: Manuel BUTON , Safety and certification officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APE2-INFPPC
Name of Grantee:  ETS GEORGES RENAULT
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Panel PC
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5745.0  -  5825.0 0.017  

Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. This device contains 20, 40 and 80 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: