FCC ID 2APJ4-SLM550
Smart module
by MeiG Smart Technology Co., Ltd
Grantee Code: 2APJ4 Product Code: SLM550
Latest application date: 2022-11-17
FCC ID Device Details
| FCC ID | 2APJ4-SLM550 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2APJ4 |
| Product Code | SLM550 |
| Applicant Business | MeiG Smart Technology Co., Ltd 🇨🇳 |
| Related Domains | |
| Equipment Class | Smart module |
| Test Firm | SHENZHEN TONGCE TESTING LAB |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-11-17 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2022-11-17 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-11-17 |
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2022-11-14 |
| 2402-2480 MHz | Original Equipment | 2022-09-02 |
| 2412-2462 MHz | Original Equipment | 2022-09-02 |
| 5180-5240 MHz | Original Equipment | 2022-09-02 |
| 700.5-714.5 MHz | Original Equipment | 2022-09-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2022-11-17 | PDF 2.3 MB |
| User manual | Users Manual | 2022-11-17 | PDF 2.3 MB |
| User Manual | Users Manual | 2022-09-02 | PDF 2.3 MB |
| User manaul | Users Manual | 2022-09-02 | PDF 2.3 MB |
| Internal Photos | Internal Photos | 2022-11-17 | PDF 287.4 KB |
| Internal Photographs | Internal Photos | 2022-09-02 | PDF 286 KB |
| Internal Photos | Internal Photos | 2022-09-02 | PDF 286 KB |
| Internal photos | Internal Photos | 2022-09-02 | PDF 286 KB |
| External Photos | External Photos | 2022-11-17 | PDF 283.1 KB |
| External photos | External Photos | 2022-11-17 | PDF 283.1 KB |
| External Photographs of EUT | External Photos | 2022-09-02 | PDF 247.5 KB |
| External Photos | External Photos | 2022-09-02 | PDF 247.5 KB |
| External photos | External Photos | 2022-09-02 | PDF 247.5 KB |
| Label | ID Label/Location Info | 2022-11-17 | PDF 623 KB |
| Label Location | ID Label/Location Info | 2022-11-17 | PDF 623 KB |
| Label | ID Label/Location Info | 2022-09-02 | PDF 371.9 KB |
| Test Setup Photos | Test Setup Photos | 2022-11-17 | PDF 271.6 KB |
| Test photos | Test Setup Photos | 2022-11-17 | PDF 271.6 KB |
| Test setup Photos | Test Setup Photos | 2022-09-02 | PDF 271.6 KB |
| Antenna specification | Test Report | 2022-11-17 | PDF 233.8 KB |
| Test Report | Test Report | 2022-11-17 | PDF 5 MB |
| Test Report | Test Report | 2022-11-17 | PDF 5.8 MB |
| Test Report | Test Report | 2022-11-17 | PDF 5 MB |
| Test Report | Test Report | 2022-11-14 | PDF 425.3 KB |
| Test Report | Test Report | 2022-09-02 | PDF 4.9 MB |
| Test Report | Test Report | 2022-09-02 | PDF 4.8 MB |
| test report | Test Report | 2022-09-02 | PDF 5.5 MB |
| test report | Test Report | 2022-09-02 | PDF 5.6 MB |
| test report | Test Report | 2022-09-02 | PDF 1.9 MB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2022-11-17 | PDF 67 KB |
| AgentAuthorizationRev1.0 | Cover Letter(s) | 2022-11-17 | PDF 67 KB |
| Compliance list statement | Cover Letter(s) | 2022-11-17 | PDF 422.6 KB |
| FCC Limit Modular Approval Request | Cover Letter(s) | 2022-11-17 | PDF 102.7 KB |
| FCC Long Term Only Confidentiality Request Rev4.1 | Cover Letter(s) | 2022-11-17 | PDF 175.1 KB |
| FCC Short_Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2022-11-17 | PDF 175.1 KB |
| FCC Software Configuration Control Declaration Rev1.1 | Cover Letter(s) | 2022-11-17 | PDF 91.4 KB |
| FCC_Class II PC request letter Rev1 | Cover Letter(s) | 2022-11-17 | PDF 137.8 KB |
| Long_Term_Confidentiality | Cover Letter(s) | 2022-11-17 | PDF 175.1 KB |
| FCC ClassIIPCrequestletterRev1 | Cover Letter(s) | 2022-11-14 | PDF 11.1 KB |
| FCC Long Term Only Confidentiality Request Rev4.1 | Cover Letter(s) | 2022-11-14 | PDF 174.1 KB |
| FCC Modular Approval Request Rev 3.0_rev1 | Cover Letter(s) | 2022-11-14 | PDF 102.7 KB |
| Agent Authorization | Cover Letter(s) | 2022-09-02 | PDF 25.9 KB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2022-09-02 | PDF 25.9 KB |
| Complianceliststatement | Cover Letter(s) | 2022-09-02 | PDF 358.8 KB |
| FCC Long Term Only Confidentiality Request Rev4.1 | Cover Letter(s) | 2022-09-02 | PDF 125.9 KB |
| FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2022-09-02 | PDF 125.9 KB |
| FCC Software Configuration Control Declaration Rev1.0 | Cover Letter(s) | 2022-09-02 | PDF 15.9 KB |
| FCCLimitModularApprovalRequest | Cover Letter(s) | 2022-09-02 | PDF 23.5 KB |
| RF_Exposure | RF Exposure Info | 2022-11-17 | PDF 425.3 KB |
| RFexposure | RF Exposure Info | 2022-11-17 | PDF 425.3 KB |
| RFexposure | RF Exposure Info | 2022-11-14 | PDF 924.2 KB |
| RF Exposure | RF Exposure Info | 2022-09-02 | PDF 432 KB |
| Block Metadata only | Block Diagram | PDF 158.1 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 158.1 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 117 KB | |
| SCH Metadata only | Schematics | PDF 5.6 MB | |
| Schematics Metadata only | Schematics | PDF 5.6 MB | |
| ANT TEST REPORT Metadata only | Operational Description | PDF 331.9 KB | |
| Antenna Specification Metadata only | Operational Description | PDF 331.9 KB | |
| Antenna Specification -confidentiality Metadata only | Operational Description | PDF 331.9 KB | |
| OP Metadata only | Operational Description | PDF 596.3 KB | |
| OP Metadata only | Operational Description | PDF 656 KB | |
| OP Metadata only | Operational Description | PDF 647.7 KB | |
| Operation Description Metadata only | Operational Description | PDF 596.3 KB | |
| Operation Description Metadata only | Operational Description | PDF 656 KB | |
| Operational Description Metadata only | Operational Description | PDF 596.3 KB | |
| Operational Description Metadata only | Operational Description | PDF 656 KB | |
| antenna Specifications Metadata only | Operational Description | PDF 331.9 KB | |
| antenna report Metadata only | Operational Description | PDF 233.8 KB | |
| FCC Software Security Requirements for UNII devices Rev 2.1 Metadata only | SDR Software/Security Inf | PDF 2.2 MB | |
| SOFTWARESECURITYREQUIREMENTSFORU-NIIDEVICES Metadata only | SDR Software/Security Inf | PDF 1.9 MB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 74.9 KB | |
| Tune UP Metadata only | Parts List/Tune Up Info | PDF 78.8 KB | |
| Tune Up Procedure Metadata only | Parts List/Tune Up Info | PDF 67 KB | |
| Tune up Procedure Metadata only | Parts List/Tune Up Info | PDF 67 KB | |
| Tune-up Metadata only | Parts List/Tune Up Info | PDF 78.8 KB | |
| Tune-up Procedure Metadata only | Parts List/Tune Up Info | PDF 78.8 KB | |
| Tune-up procedure Metadata only | Parts List/Tune Up Info | PDF 67 KB |
Application Information
| Application ID | wRS/I1o4IwIGB3v98VVCCg== |
|---|---|
| Final Action Date | 2022-11-17 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0027430412 |
| Model | SLM550 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Smart module |
| Responsible Party | Xinwei Lou, HW test Leader, louxinwei@meigsmart.com |
| Technical Contact | MeiG Smart Technology Co., Ltd, louxinwei@meigsmart.com |
| Test Firm | Beryl Zhao, SHENZHEN TONGCE TESTING LAB, berylzhao@tct-lab.com |
| TCB Email | certification@micomlabs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Modular Approval. Output power listed is maximum conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| wRS/I1o4IwIGB3v98VVCCg== | 2022-11-17 | Class II permissive change or modification of presently authorized equipment |
| FkC9zUZH+dF8kv+tm3ZZzA== | 2022-11-17 | Class II permissive change or modification of presently authorized equipment |
| +XyEtwsjZD4S4BZG9wSVJg== | 2022-11-17 | Class II permissive change or modification of presently authorized equipment |
| lkV7VeN+vvxQIr/joJBbpw== | 2022-11-14 | Class II permissive change or modification of presently authorized equipment |
| fRXKxC9CR1Jm5028pmlSVg== | 2022-09-02 | Original Equipment |
| etona60ZmIOOMcoX74UVJQ== | 2022-09-02 | Original Equipment |
| ecPL2nJcL8G/N/zPOmLvSw== | 2022-09-02 | Original Equipment |
| GpJVb8WRWpmVLpf40YzbKw== | 2022-09-02 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 700.5-714.5 MHz | 0.292 | 0.023151ppm | 2M70G7D | 27 | |
| 704-711 MHz | 0.286 | 0.023151ppm | 8M97G7D | 27 | |
| 704-711 MHz | 0.263 | 0.007802ppm | 8M96W7D | 27 | |
| 709-711 MHz | 0.289 | 0.009141ppm | 8M98G7D | 27 | |
| 709-711 MHz | 0.27 | 0.009366ppm | 8M97W7D | 27 | |
| 779.5-784.5 MHz | 0.272 | 0.009586ppm | 4M50G7D | 27 | |
| 779.5-784.5 MHz | 0.236 | 0.006463ppm | 4M49W7D | 27 | |
| 782 MHz | 0.268 | 0.009586ppm | 8M94G7D | 27 | |
| 782 MHz | 0.209 | 0.006463ppm | 8M93W7D | 27 | |
| 814.7-823.3 MHz | 0.249 | 0.021873ppm | 1M09G7D | 22H | |
| 814.7-823.3 MHz | 0.211 | 0.008052ppm | 1M09W7D | 22H | |
| 821.5 MHz | 0.239 | 0.021873ppm | 13M4G7D | 22H | |
| 821.5 MHz | 0.195 | 0.008052ppm | 13M4W7D | 22H | |
| 824.2-848.8 MHz | 0.27 | 0.019ppm | 245KG7W | 22H | |
| 824.7-848.3 MHz | 0.289 | 0.021559ppm | 1M09G7D | 22H | |
| 824.7-848.3 MHz | 0.275 | 0.022881ppm | 1M09G7D | 22H | |
| 825.5-847.5 MHz | 0.251 | 0.009217ppm | 2M69W7D | 22H | |
| 826.4-846.6 MHz | 0.12 | 0.02ppm | 4M12F9W | 22H | |
| 829-844 MHz | 0.281 | 0.021559ppm | 8M97G7D | 22H | |
| 829-844 MHz | 0.225 | 0.009217ppm | 8M97W7D | 22H | |
| 829-844 MHz | 0.241 | 0.007663ppm | 8M96W7D | 22H | |
| 831.5-841.5 MHz | 0.253 | 0.022881ppm | 13M4G7D | 22H | |
| 831.5-841.5 MHz | 0.219 | 0.007663ppm | 13M4W7D | 22H | |
| 1715-1750 MHz | 0.581 | 0.011782ppm | 8M97G7D | 27 | |
| 1717.5-1747.5 MHz | 0.516 | 0.005353ppm | 13M4W7D | 27 | |
| 1720-1745 MHz | 0.558 | 0.011782ppm | 17M9G7D | 27 | |
| 1720-1745 MHz | 0.501 | 0.005353ppm | 17M9W7D | 27 | |
| 1720-1770 MHz | 0.61 | 0.010086ppm | 17M9G7D | 27 | |
| 1720-1770 MHz | 0.509 | 0.009862ppm | 17M9W7D | 27 | |
| 1850.2-1909.8 MHz | 0.36 | 0.023ppm | 243KG7W | 24E | |
| 1852.4-1907.6 MHz | 0.2 | 0.023ppm | 4M12F9W | 24E | |
| 1860-1905 MHz | 0.448 | 0.009926ppm | 17M9G7D | 24E | |
| 1860-1905 MHz | 0.389 | 0.012664ppm | 17M9W7D | 24E | |
| 1860-1900 MHz | 0.55 | 0.011484ppm | 17M9G7D | 24E | |
| 1860-1900 MHz | 0.488 | 0.005378ppm | 17M9W7D | 24E | |
| 2402-2480 MHz | 0.0047 | 15C | CC | ||
| 2402-2480 MHz | 0.0051000 | 15C | CC | ||
| 2412-2462 MHz | 0.0452 | 15C | CC | ||
| 2505-2565 MHz | 0.662 | 0.004743ppm | 8M96W7D | 27 | |
| 2510-2560 MHz | 0.719 | 0.00396ppm | 17M9G7D | 27 | |
| 2510-2560 MHz | 0.64 | 0.004743ppm | 17M9W7D | 27 | |
| 5180-5240 MHz | 0.0202 | 15E | CC | ||
| 5260-5320 MHz | 0.0221 | 15E | CC, ND | ||
| 5500-5700 MHz | 0.0212 | 15E | CC, ND | ||
| 5745-5825 MHz | 0.014 | 15E | CC |
Grants
TCB Grant - Application wRS/I1o4IwIGB3v98VVCCg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 11/17/2022 Application Dated: 11/17/2022 |
| MeiG Smart Technology Co., Ltd |
| 2nd Floor, Office Building,No.5 Lingxia Road, |
| Fenghuang,Fuyong Street, |
| Bao 'an District,shenzhen, China |
| Attention: Xinwei Lou , HW test Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APJ4-SLM550 |
| Name of Grantee: | MeiG Smart Technology Co., Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Smart module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0051 |
| Limited Modular Approval. Output power listed is maximum conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application wRS/I1o4IwIGB3v98VVCCg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MeiG Smart Technology Co., Ltd 2nd Floor, Office Building,No.5 Lingxia Road, Fenghuang,Fuyong Street, Bao 'an District,shenzhen, China |
Date of Grant: 11/17/2022 Application Dated: 11/17/2022 |
| Attention: Xinwei Lou , HW test Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APJ4-SLM550 |
| Name of Grantee: | MeiG Smart Technology Co., Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Smart module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0051 |
| Limited Modular Approval. Output power listed is maximum conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 11/14/2022 Application Dated: 11/14/2022 |
| MeiG Smart Technology Co., Ltd |
| 2nd Floor, Office Building,No.5 Lingxia Road, |
| Fenghuang,Fuyong Street, |
| Bao 'an District,shenzhen, China |
| Attention: Xinwei Lou , HW test Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APJ4-SLM550 |
| Name of Grantee: | MeiG Smart Technology Co., Ltd |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Smart module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 0.85 | 0.019 PM | 245KGXW | |
| 24E | 1850.2 - 1909.8 | 0.71 | 0.023 PM | 243KGXW | |
| 22H | 824.2 - 848.8 | 0.27 | 0.019 PM | 245KG7W | |
| 24E | 1850.2 - 1909.8 | 0.36 | 0.023 PM | 243KG7W | |
| 22H | 826.4 - 846.6 | 0.12 | 0.02 PM | 4M12F9W | |
| 24E | 1852.4 - 1907.6 | 0.2 | 0.023 PM | 4M12F9W | |
| 24E | 1860.0 - 1900.0 | 0.55 | 0.011484 PM | 17M9G7D | |
| 24E | 1860.0 - 1900.0 | 0.488 | 0.005378 PM | 17M9W7D | |
| 27 | 1715.0 - 1750.0 | 0.581 | 0.011782 PM | 8M97G7D | |
| 27 | 1720.0 - 1745.0 | 0.558 | 0.011782 PM | 17M9G7D | |
| 27 | 1717.5 - 1747.5 | 0.516 | 0.005353 PM | 13M4W7D | |
| 27 | 1720.0 - 1745.0 | 0.501 | 0.005353 PM | 17M9W7D | |
| 22H | 824.7 - 848.3 | 0.289 | 0.021559 PM | 1M09G7D | |
| 22H | 829.0 - 844.0 | 0.281 | 0.021559 PM | 8M97G7D | |
| 22H | 825.5 - 847.5 | 0.251 | 0.009217 PM | 2M69W7D | |
| 22H | 829.0 - 844.0 | 0.225 | 0.009217 PM | 8M97W7D | |
| 27 | 2510.0 - 2560.0 | 0.719 | 0.00396 PM | 17M9G7D | |
| 27 | 2505.0 - 2565.0 | 0.662 | 0.004743 PM | 8M96W7D | |
| 27 | 2510.0 - 2560.0 | 0.64 | 0.004743 PM | 17M9W7D | |
| 24E | 1860.0 - 1905.0 | 0.448 | 0.009926 PM | 17M9G7D | |
| 24E | 1860.0 - 1905.0 | 0.389 | 0.012664 PM | 17M9W7D | |
| 27 | 1720.0 - 1770.0 | 0.61 | 0.010086 PM | 17M9G7D | |
| 27 | 1720.0 - 1770.0 | 0.509 | 0.009862 PM | 17M9W7D |
| Limited Modular Approval. Power output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
EAS Grant - Application lkV7VeN+vvxQIr/joJBbpw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MeiG Smart Technology Co., Ltd 2nd Floor, Office Building,No.5 Lingxia Road, Fenghuang,Fuyong Street, Bao 'an District,shenzhen, China |
Date of Grant: 11/14/2022 Application Dated: 11/14/2022 |
| Attention: Xinwei Lou , HW test Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APJ4-SLM550 |
| Name of Grantee: | MeiG Smart Technology Co., Ltd |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Smart module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 0.85 | 0.019 PM | 245KGXW | |
| 24E | 1850.2 - 1909.8 | 0.71 | 0.023 PM | 243KGXW | |
| 22H | 824.2 - 848.8 | 0.27 | 0.019 PM | 245KG7W | |
| 24E | 1850.2 - 1909.8 | 0.36 | 0.023 PM | 243KG7W | |
| 22H | 826.4 - 846.6 | 0.12 | 0.02 PM | 4M12F9W | |
| 24E | 1852.4 - 1907.6 | 0.2 | 0.023 PM | 4M12F9W | |
| 24E | 1860.0 - 1900.0 | 0.55 | 0.011484 PM | 17M9G7D | |
| 24E | 1860.0 - 1900.0 | 0.488 | 0.005378 PM | 17M9W7D | |
| 27 | 1715.0 - 1750.0 | 0.581 | 0.011782 PM | 8M97G7D | |
| 27 | 1720.0 - 1745.0 | 0.558 | 0.011782 PM | 17M9G7D | |
| 27 | 1717.5 - 1747.5 | 0.516 | 0.005353 PM | 13M4W7D | |
| 27 | 1720.0 - 1745.0 | 0.501 | 0.005353 PM | 17M9W7D | |
| 22H | 824.7 - 848.3 | 0.289 | 0.021559 PM | 1M09G7D | |
| 22H | 829.0 - 844.0 | 0.281 | 0.021559 PM | 8M97G7D | |
| 22H | 825.5 - 847.5 | 0.251 | 0.009217 PM | 2M69W7D | |
| 22H | 829.0 - 844.0 | 0.225 | 0.009217 PM | 8M97W7D | |
| 27 | 2510.0 - 2560.0 | 0.719 | 0.00396 PM | 17M9G7D | |
| 27 | 2505.0 - 2565.0 | 0.662 | 0.004743 PM | 8M96W7D | |
| 27 | 2510.0 - 2560.0 | 0.64 | 0.004743 PM | 17M9W7D | |
| 24E | 1860.0 - 1905.0 | 0.448 | 0.009926 PM | 17M9G7D | |
| 24E | 1860.0 - 1905.0 | 0.389 | 0.012664 PM | 17M9W7D | |
| 27 | 1720.0 - 1770.0 | 0.61 | 0.010086 PM | 17M9G7D | |
| 27 | 1720.0 - 1770.0 | 0.509 | 0.009862 PM | 17M9W7D |
| Limited Modular Approval. Power output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 09/02/2022 Application Dated: 09/02/2022 |
| MeiG Smart Technology Co., Ltd |
| 2nd Floor, Office Building,No.5 Lingxia Road, |
| Fenghuang,Fuyong Street, |
| Bao 'an District,shenzhen, China |
| Attention: Xinwei Lou , HW test Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APJ4-SLM550 |
| Name of Grantee: | MeiG Smart Technology Co., Ltd |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Smart module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 0.85 | 0.019 PM | 245KGXW | |
| 24E | 1850.2 - 1909.8 | 0.71 | 0.023 PM | 243KGXW | |
| 22H | 824.2 - 848.8 | 0.27 | 0.019 PM | 245KG7W | |
| 24E | 1850.2 - 1909.8 | 0.36 | 0.023 PM | 243KG7W | |
| 22H | 826.4 - 846.6 | 0.12 | 0.02 PM | 4M12F9W | |
| 24E | 1852.4 - 1907.6 | 0.2 | 0.023 PM | 4M12F9W | |
| 24E | 1860.0 - 1900.0 | 0.55 | 0.011484 PM | 17M9G7D | |
| 24E | 1860.0 - 1900.0 | 0.488 | 0.005378 PM | 17M9W7D | |
| 27 | 1715.0 - 1750.0 | 0.581 | 0.011782 PM | 8M97G7D | |
| 27 | 1720.0 - 1745.0 | 0.558 | 0.011782 PM | 17M9G7D | |
| 27 | 1717.5 - 1747.5 | 0.516 | 0.005353 PM | 13M4W7D | |
| 27 | 1720.0 - 1745.0 | 0.501 | 0.005353 PM | 17M9W7D | |
| 22H | 824.7 - 848.3 | 0.289 | 0.021559 PM | 1M09G7D | |
| 22H | 829.0 - 844.0 | 0.281 | 0.021559 PM | 8M97G7D | |
| 22H | 825.5 - 847.5 | 0.251 | 0.009217 PM | 2M69W7D | |
| 22H | 829.0 - 844.0 | 0.225 | 0.009217 PM | 8M97W7D | |
| 27 | 2510.0 - 2560.0 | 0.719 | 0.00396 PM | 17M9G7D | |
| 27 | 2505.0 - 2565.0 | 0.662 | 0.004743 PM | 8M96W7D | |
| 27 | 2510.0 - 2560.0 | 0.64 | 0.004743 PM | 17M9W7D | |
| 27 | 700.5 - 714.5 | 0.292 | 0.023151 PM | 2M70G7D | |
| 27 | 704.0 - 711.0 | 0.286 | 0.023151 PM | 8M97G7D | |
| 27 | 704.0 - 711.0 | 0.263 | 0.007802 PM | 8M96W7D | |
| 27 | 779.5 - 784.5 | 0.272 | 0.009586 PM | 4M50G7D | |
| 27 | 782.0 - 782.0 | 0.268 | 0.009586 PM | 8M94G7D | |
| 27 | 779.5 - 784.5 | 0.236 | 0.006463 PM | 4M49W7D | |
| 27 | 782.0 - 782.0 | 0.209 | 0.006463 PM | 8M93W7D | |
| 27 | 709.0 - 711.0 | 0.289 | 0.009141 PM | 8M98G7D | |
| 27 | 709.0 - 711.0 | 0.27 | 0.009366 PM | 8M97W7D | |
| 24E | 1860.0 - 1905.0 | 0.448 | 0.009926 PM | 17M9G7D | |
| 24E | 1860.0 - 1905.0 | 0.389 | 0.012664 PM | 17M9W7D | |
| 22H | 814.7 - 823.3 | 0.249 | 0.021873 PM | 1M09G7D | |
| 22H | 821.5 - 821.5 | 0.239 | 0.021873 PM | 13M4G7D | |
| 22H | 814.7 - 823.3 | 0.211 | 0.008052 PM | 1M09W7D | |
| 22H | 821.5 - 821.5 | 0.195 | 0.008052 PM | 13M4W7D | |
| 22H | 824.7 - 848.3 | 0.275 | 0.022881 PM | 1M09G7D | |
| 22H | 831.5 - 841.5 | 0.253 | 0.022881 PM | 13M4G7D | |
| 22H | 829.0 - 844.0 | 0.241 | 0.007663 PM | 8M96W7D | |
| 22H | 831.5 - 841.5 | 0.219 | 0.007663 PM | 13M4W7D | |
| 27 | 1720.0 - 1770.0 | 0.61 | 0.010086 PM | 17M9G7D | |
| 27 | 1720.0 - 1770.0 | 0.509 | 0.009862 PM | 17M9W7D |
| Limited Modular Approval. Power output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
EAS Grant - Application GpJVb8WRWpmVLpf40YzbKw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MeiG Smart Technology Co., Ltd 2nd Floor, Office Building,No.5 Lingxia Road, Fenghuang,Fuyong Street, Bao 'an District,shenzhen, China |
Date of Grant: 09/02/2022 Application Dated: 09/02/2022 |
| Attention: Xinwei Lou , HW test Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APJ4-SLM550 |
| Name of Grantee: | MeiG Smart Technology Co., Ltd |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Smart module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 0.85 | 0.019 PM | 245KGXW | |
| 24E | 1850.2 - 1909.8 | 0.71 | 0.023 PM | 243KGXW | |
| 22H | 824.2 - 848.8 | 0.27 | 0.019 PM | 245KG7W | |
| 24E | 1850.2 - 1909.8 | 0.36 | 0.023 PM | 243KG7W | |
| 22H | 826.4 - 846.6 | 0.12 | 0.02 PM | 4M12F9W | |
| 24E | 1852.4 - 1907.6 | 0.2 | 0.023 PM | 4M12F9W | |
| 24E | 1860.0 - 1900.0 | 0.55 | 0.011484 PM | 17M9G7D | |
| 24E | 1860.0 - 1900.0 | 0.488 | 0.005378 PM | 17M9W7D | |
| 27 | 1715.0 - 1750.0 | 0.581 | 0.011782 PM | 8M97G7D | |
| 27 | 1720.0 - 1745.0 | 0.558 | 0.011782 PM | 17M9G7D | |
| 27 | 1717.5 - 1747.5 | 0.516 | 0.005353 PM | 13M4W7D | |
| 27 | 1720.0 - 1745.0 | 0.501 | 0.005353 PM | 17M9W7D | |
| 22H | 824.7 - 848.3 | 0.289 | 0.021559 PM | 1M09G7D | |
| 22H | 829.0 - 844.0 | 0.281 | 0.021559 PM | 8M97G7D | |
| 22H | 825.5 - 847.5 | 0.251 | 0.009217 PM | 2M69W7D | |
| 22H | 829.0 - 844.0 | 0.225 | 0.009217 PM | 8M97W7D | |
| 27 | 2510.0 - 2560.0 | 0.719 | 0.00396 PM | 17M9G7D | |
| 27 | 2505.0 - 2565.0 | 0.662 | 0.004743 PM | 8M96W7D | |
| 27 | 2510.0 - 2560.0 | 0.64 | 0.004743 PM | 17M9W7D | |
| 27 | 700.5 - 714.5 | 0.292 | 0.023151 PM | 2M70G7D | |
| 27 | 704.0 - 711.0 | 0.286 | 0.023151 PM | 8M97G7D | |
| 27 | 704.0 - 711.0 | 0.263 | 0.007802 PM | 8M96W7D | |
| 27 | 779.5 - 784.5 | 0.272 | 0.009586 PM | 4M50G7D | |
| 27 | 782.0 - 782.0 | 0.268 | 0.009586 PM | 8M94G7D | |
| 27 | 779.5 - 784.5 | 0.236 | 0.006463 PM | 4M49W7D | |
| 27 | 782.0 - 782.0 | 0.209 | 0.006463 PM | 8M93W7D | |
| 27 | 709.0 - 711.0 | 0.289 | 0.009141 PM | 8M98G7D | |
| 27 | 709.0 - 711.0 | 0.27 | 0.009366 PM | 8M97W7D | |
| 24E | 1860.0 - 1905.0 | 0.448 | 0.009926 PM | 17M9G7D | |
| 24E | 1860.0 - 1905.0 | 0.389 | 0.012664 PM | 17M9W7D | |
| 22H | 814.7 - 823.3 | 0.249 | 0.021873 PM | 1M09G7D | |
| 22H | 821.5 - 821.5 | 0.239 | 0.021873 PM | 13M4G7D | |
| 22H | 814.7 - 823.3 | 0.211 | 0.008052 PM | 1M09W7D | |
| 22H | 821.5 - 821.5 | 0.195 | 0.008052 PM | 13M4W7D | |
| 22H | 824.7 - 848.3 | 0.275 | 0.022881 PM | 1M09G7D | |
| 22H | 831.5 - 841.5 | 0.253 | 0.022881 PM | 13M4G7D | |
| 22H | 829.0 - 844.0 | 0.241 | 0.007663 PM | 8M96W7D | |
| 22H | 831.5 - 841.5 | 0.219 | 0.007663 PM | 13M4W7D | |
| 27 | 1720.0 - 1770.0 | 0.61 | 0.010086 PM | 17M9G7D | |
| 27 | 1720.0 - 1770.0 | 0.509 | 0.009862 PM | 17M9W7D |
| Limited Modular Approval. Power output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 09/02/2022 Application Dated: 09/02/2022 |
| MeiG Smart Technology Co., Ltd |
| 2nd Floor, Office Building,No.5 Lingxia Road, |
| Fenghuang,Fuyong Street, |
| Bao 'an District,shenzhen, China |
| Attention: Xinwei Lou , HW test Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APJ4-SLM550 |
| Name of Grantee: | MeiG Smart Technology Co., Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Smart module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0051 |
| Limited Modular Approval. Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application fRXKxC9CR1Jm5028pmlSVg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MeiG Smart Technology Co., Ltd 2nd Floor, Office Building,No.5 Lingxia Road, Fenghuang,Fuyong Street, Bao 'an District,shenzhen, China |
Date of Grant: 09/02/2022 Application Dated: 09/02/2022 |
| Attention: Xinwei Lou , HW test Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APJ4-SLM550 |
| Name of Grantee: | MeiG Smart Technology Co., Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Smart module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0051 |
| Limited Modular Approval. Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 11/17/2022 Application Dated: 11/17/2022 |
| MeiG Smart Technology Co., Ltd |
| 2nd Floor, Office Building,No.5 Lingxia Road, |
| Fenghuang,Fuyong Street, |
| Bao 'an District,shenzhen, China |
| Attention: Xinwei Lou , HW test Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APJ4-SLM550 |
| Name of Grantee: | MeiG Smart Technology Co., Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Smart module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0202 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0221 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0212 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.014 |
| Limited Modular Approval. Output power listed is maximum conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application FkC9zUZH+dF8kv+tm3ZZzA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MeiG Smart Technology Co., Ltd 2nd Floor, Office Building,No.5 Lingxia Road, Fenghuang,Fuyong Street, Bao 'an District,shenzhen, China |
Date of Grant: 11/17/2022 Application Dated: 11/17/2022 |
| Attention: Xinwei Lou , HW test Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APJ4-SLM550 |
| Name of Grantee: | MeiG Smart Technology Co., Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Smart module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0202 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0221 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0212 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.014 |
| Limited Modular Approval. Output power listed is maximum conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 09/02/2022 Application Dated: 09/02/2022 |
| MeiG Smart Technology Co., Ltd |
| 2nd Floor, Office Building,No.5 Lingxia Road, |
| Fenghuang,Fuyong Street, |
| Bao 'an District,shenzhen, China |
| Attention: Xinwei Lou , HW test Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APJ4-SLM550 |
| Name of Grantee: | MeiG Smart Technology Co., Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0047 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0452 |
| Limited Modular Approval. Power listed is the maximum conducted output power. This device contains 20 and 40 MHz signal bandwidth. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application etona60ZmIOOMcoX74UVJQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MeiG Smart Technology Co., Ltd 2nd Floor, Office Building,No.5 Lingxia Road, Fenghuang,Fuyong Street, Bao 'an District,shenzhen, China |
Date of Grant: 09/02/2022 Application Dated: 09/02/2022 |
| Attention: Xinwei Lou , HW test Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APJ4-SLM550 |
| Name of Grantee: | MeiG Smart Technology Co., Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0047 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0452 |
| Limited Modular Approval. Power listed is the maximum conducted output power. This device contains 20 and 40 MHz signal bandwidth. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 09/02/2022 Application Dated: 09/02/2022 |
| MeiG Smart Technology Co., Ltd |
| 2nd Floor, Office Building,No.5 Lingxia Road, |
| Fenghuang,Fuyong Street, |
| Bao 'an District,shenzhen, China |
| Attention: Xinwei Lou , HW test Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APJ4-SLM550 |
| Name of Grantee: | MeiG Smart Technology Co., Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Smart module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0202 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0221 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0212 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.014 |
| Limited Modular Approval. Output power listed is maximum conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application ecPL2nJcL8G/N/zPOmLvSw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MeiG Smart Technology Co., Ltd 2nd Floor, Office Building,No.5 Lingxia Road, Fenghuang,Fuyong Street, Bao 'an District,shenzhen, China |
Date of Grant: 09/02/2022 Application Dated: 09/02/2022 |
| Attention: Xinwei Lou , HW test Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APJ4-SLM550 |
| Name of Grantee: | MeiG Smart Technology Co., Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Smart module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0202 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0221 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0212 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.014 |
| Limited Modular Approval. Output power listed is maximum conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 11/17/2022 Application Dated: 11/17/2022 |
| MeiG Smart Technology Co., Ltd |
| 2nd Floor, Office Building,No.5 Lingxia Road, |
| Fenghuang,Fuyong Street, |
| Bao 'an District,shenzhen, China |
| Attention: Xinwei Lou , HW test Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APJ4-SLM550 |
| Name of Grantee: | MeiG Smart Technology Co., Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0047 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0452 |
| Limited Modular Approval. Output power listed is maximum conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application +XyEtwsjZD4S4BZG9wSVJg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MeiG Smart Technology Co., Ltd 2nd Floor, Office Building,No.5 Lingxia Road, Fenghuang,Fuyong Street, Bao 'an District,shenzhen, China |
Date of Grant: 11/17/2022 Application Dated: 11/17/2022 |
| Attention: Xinwei Lou , HW test Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APJ4-SLM550 |
| Name of Grantee: | MeiG Smart Technology Co., Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0047 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0452 |
| Limited Modular Approval. Output power listed is maximum conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |