1. FCC ID
  2. 2APL8
  3. 2APL8A3

FCC ID 2APL8A3

Smart phone

by Shenzhen UMIDIGI company Limited

Grantee Code: 2APL8   Product Code: A3
Latest application date: 2018-11-13

FCC ID Device Details

FCC ID2APL8A3
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2APL8
Product CodeA3
Applicant BusinessShenzhen UMIDIGI company Limited 🇨🇳
Related Domains 91umi.com
Equipment ClassSmart phone
Test FirmJianYan Testing Group Shenzhen Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2018-11-13
699.7-715.3 MHzOriginal Equipment2018-11-13
2402-2480 MHzOriginal Equipment2018-11-13
2402-2480 MHzOriginal Equipment2018-11-13

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2018-11-13PDF 1.7 MB
Internal photosInternal Photos2018-11-13PDF 1.8 MB
External photosExternal Photos2018-11-13PDF 1 MB
LabelID Label/Location Info2018-11-13PDF 135.7 KB
Test setupTest Setup Photos2018-11-13PDF 413.8 KB
Test setupTest Setup Photos2018-11-13PDF 267.4 KB
Test setupTest Setup Photos2018-11-13PDF 378.5 KB
Test reportTest Report2018-11-13PDF 2.1 MB
Test reportTest Report2018-11-13PDF 1.8 MB
Test reportTest Report2018-11-13PDF 3.5 MB
Test reportTest Report2018-11-13PDF 2.9 MB
Test reportTest Report2018-11-13PDF 1.3 MB
Test report LTE part 1Test Report2018-11-13PDF 3.1 MB
Test report LTE part 2Test Report2018-11-13PDF 3.5 MB
Test report LTE part 3Test Report2018-11-13PDF 3.4 MB
Test report LTE part 4Test Report2018-11-13PDF 1.1 MB
Cover letterCover Letter(s)2018-11-13PDF 75.4 KB
SAR report part 1RF Exposure Info2018-11-13PDF 5.6 MB
SAR report part 2RF Exposure Info2018-11-13PDF 1.1 MB
Block Diagram Metadata onlyBlock DiagramPDF 319 KB
Schematics Metadata onlySchematicsPDF 2 MB
Operational Description Metadata onlyOperational DescriptionPDF 270.3 KB
Software security Metadata onlySDR Software/Security InfPDF 247.1 KB
Parts list Metadata onlyParts List/Tune Up InfoPDF 164.6 KB
Tune up Metadata onlyParts List/Tune Up InfoPDF 277.4 KB

Application Information

Application IDql3mRDx6wbKZa9esjHkjQA==
Final Action Date2018-11-13
Application PurposeOriginal Equipment
Applicant FRN0027449495
ModelA3
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionSmart phone
Responsible PartyYu Zhang, zhangyu@91umi.com , 86-0755-83220991
Test FirmBruce Zhang, JianYan Testing Group Shenzhen Co., Ltd., bruce.zhang@ccis-cb.com , +86 (0) 755 23118282
TCB Emailstuart.beck@nemko.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. This device is approved for use in the handset described in this filing. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
ql3mRDx6wbKZa9esjHkjQA==2018-11-13Original Equipment
YT6xP0MPATDTJx7ZA6zsCA==2018-11-13Original Equipment
UdKJkK+KCBPrMKMmq0AB2Q==2018-11-13Original Equipment
3A8Pjw4z/M2rY5f1YkmuvA==2018-11-13Original Equipment
+32ZzHqMOt3UdD09jklrEA==2018-11-13Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
15BCC
699.7-715.3 MHz0.10280.23ppm1M09W7D27
700.5-714.5 MHz0.12650.27ppm2M74G7D27
704-711 MHz0.12160.27ppm9M12G7D27
704-711 MHz0.10230.23ppm9M12W7D27
706.5-713.5 MHz0.12940.28ppm4M54G7D27
706.5-713.5 MHz0.10470.24ppm4M52W7D27
709-711 MHz0.12190.28ppm8M96G7D27
709-711 MHz0.09530.24ppm9M00W7D27
826.4-846.6 MHz0.09160.2ppm4M20F9W22H
826.5-846.5 MHz0.12110.23ppm4M52G7D22H
829-844 MHz0.11830.23ppm9M12G7D22H
829-844 MHz0.09890.2ppm9M08W7D22H
1712.4-1752.6 MHz0.17820.1ppm4M18F9W27
1715-1750 MHz0.21330.11ppm9M12G7D27
1717.5-1747.5 MHz0.18750.1ppm13M6W7D27
1720-1745 MHz0.20320.11ppm18M1G7D27
1720-1745 MHz0.1660.1ppm18M0W7D27
1850.2-1909.8 MHz0.93330.09ppm248KGXW24E
1850.2-1909.8 MHz0.30830.1ppm250KG7W24E
1852.4-1907.6 MHz0.12390.1ppm4M20F9W24E
1855-1905 MHz0.21180.11ppm9M12G7D24E
1860-1900 MHz0.19860.11ppm18M0G7D24E
1860-1900 MHz0.18410.09ppm18M0W7D24E
2402-2480 MHz0.004645015CCC
2402-2480 MHz0.0041615CCC
2412-2462 MHz0.0418815CCC
2422-2452 MHz0.0178615CCC
5180-5240 MHz0.0033515ECC
5190-5230 MHz0.0025915ECC

Grants

TCB Grant - Application YT6xP0MPATDTJx7ZA6zsCA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 11/13/2018

Application Dated: 11/12/2018
Shenzhen UMIDIGI company Limited
405-407 Jinqi Zhigu Building, 4/F,
1 Tangling Road, Nanshan District, Shenzhen
Shenzhen,
China
 
Attention: Yu Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APL8A3
Name of Grantee:  Shenzhen UMIDIGI company Limited
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Smart phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.125 0.21  PM 250KGXW
22H 824.2  -  848.8 0.2716 0.21  PM 256KG7W
22H 826.4  -  846.6 0.0916 0.2  PM 4M20F9W
24E 1850.2  -  1909.8 0.9333 0.09  PM 248KGXW
24E 1850.2  -  1909.8 0.3083 0.1  PM 250KG7W
24E 1852.4  -  1907.6 0.1239 0.1  PM 4M20F9W
27 1712.4  -  1752.6 0.1782 0.1  PM 4M18F9W
24E 1860.0  -  1900.0 0.1986 0.11  PM 18M0G7D
24E 1860.0  -  1900.0 0.1841 0.09  PM 18M0W7D
24E 1855.0  -  1905.0 0.2118 0.11  PM 9M12G7D
27 1720.0  -  1745.0 0.2032 0.11  PM 18M1G7D
27 1720.0  -  1745.0 0.166 0.1  PM 18M0W7D
27 1715.0  -  1750.0 0.2133 0.11  PM 9M12G7D
27 1717.5  -  1747.5 0.1875 0.1  PM 13M6W7D
22H 829.0  -  844.0 0.1183 0.23  PM 9M12G7D
22H 829.0  -  844.0 0.0989 0.2  PM 9M08W7D
22H 826.5  -  846.5 0.1211 0.23  PM 4M52G7D
27 704.0  -  711.0 0.1216 0.27  PM 9M12G7D
27 704.0  -  711.0 0.1023 0.23  PM 9M12W7D
27 700.5  -  714.5 0.1265 0.27  PM 2M74G7D
27 699.7  -  715.3 0.1028 0.23  PM 1M09W7D
27 709.0  -  711.0 0.1219 0.28  PM 8M96G7D
27 709.0  -  711.0 0.0953 0.24  PM 9M00W7D
27 706.5  -  713.5 0.1294 0.28  PM 4M54G7D
27 706.5  -  713.5 0.1047 0.24  PM 4M52W7D

Output power listed is ERP for Part 22 and Part 27 for frequencies below 1 GHz, EIRP for Part 24 and Part 27 for frequencies above 1 GHz. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 1 cm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 1.35 W/kg, 0.49 W/kg, 0.49 W/kg, and 1.49 W/kg, respectively. This device contains functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

EAS Grant - Application YT6xP0MPATDTJx7ZA6zsCA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen UMIDIGI company Limited
405-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen
Shenzhen,
China 		  Date of Grant: 11/13/2018

Application Dated: 11/12/2018
 
Attention: Yu Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APL8A3
Name of Grantee:  Shenzhen UMIDIGI company Limited
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Smart phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.125 0.21  PM 250KGXW
22H 824.2  -  848.8 0.2716 0.21  PM 256KG7W
22H 826.4  -  846.6 0.0916 0.2  PM 4M20F9W
24E 1850.2  -  1909.8 0.9333 0.09  PM 248KGXW
24E 1850.2  -  1909.8 0.3083 0.1  PM 250KG7W
24E 1852.4  -  1907.6 0.1239 0.1  PM 4M20F9W
27 1712.4  -  1752.6 0.1782 0.1  PM 4M18F9W
24E 1860.0  -  1900.0 0.1986 0.11  PM 18M0G7D
24E 1860.0  -  1900.0 0.1841 0.09  PM 18M0W7D
24E 1855.0  -  1905.0 0.2118 0.11  PM 9M12G7D
27 1720.0  -  1745.0 0.2032 0.11  PM 18M1G7D
27 1720.0  -  1745.0 0.166 0.1  PM 18M0W7D
27 1715.0  -  1750.0 0.2133 0.11  PM 9M12G7D
27 1717.5  -  1747.5 0.1875 0.1  PM 13M6W7D
22H 829.0  -  844.0 0.1183 0.23  PM 9M12G7D
22H 829.0  -  844.0 0.0989 0.2  PM 9M08W7D
22H 826.5  -  846.5 0.1211 0.23  PM 4M52G7D
27 704.0  -  711.0 0.1216 0.27  PM 9M12G7D
27 704.0  -  711.0 0.1023 0.23  PM 9M12W7D
27 700.5  -  714.5 0.1265 0.27  PM 2M74G7D
27 699.7  -  715.3 0.1028 0.23  PM 1M09W7D
27 709.0  -  711.0 0.1219 0.28  PM 8M96G7D
27 709.0  -  711.0 0.0953 0.24  PM 9M00W7D
27 706.5  -  713.5 0.1294 0.28  PM 4M54G7D
27 706.5  -  713.5 0.1047 0.24  PM 4M52W7D

Output power listed is ERP for Part 22 and Part 27 for frequencies below 1 GHz, EIRP for Part 24 and Part 27 for frequencies above 1 GHz. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 1 cm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 1.35 W/kg, 0.49 W/kg, 0.49 W/kg, and 1.49 W/kg, respectively. This device contains functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.



TCB Grant - Application UdKJkK+KCBPrMKMmq0AB2Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 11/13/2018

Application Dated: 11/13/2018
Shenzhen UMIDIGI company Limited
405-407 Jinqi Zhigu Building, 4/F,
1 Tangling Road, Nanshan District, Shenzhen
Shenzhen,
China
 
Attention: Yu Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APL8A3
Name of Grantee:  Shenzhen UMIDIGI company Limited
Equipment Class: Digital Transmission System
Notes: Smart phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.04188  
CC 15C 2422.0  -  2452.0 0.01786  
CC 15C 2402.0  -  2480.0 0.00416  

Output power listed is conducted. This device is approved for use in the handset described in this filing. SAR compliance for body-worn operations is restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 1 cm separation between the device including its antenna and the body of user. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.17 W/kg, < 0.10 W/kg, < 0.10 W/kg, and 1.49 W/kg, respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application UdKJkK+KCBPrMKMmq0AB2Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen UMIDIGI company Limited
405-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen
Shenzhen,
China 		  Date of Grant: 11/13/2018

Application Dated: 11/13/2018
 
Attention: Yu Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APL8A3
Name of Grantee:  Shenzhen UMIDIGI company Limited
Equipment Class: Digital Transmission System
Notes: Smart phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.04188  
CC 15C 2422.0  -  2452.0 0.01786  
CC 15C 2402.0  -  2480.0 0.00416  

Output power listed is conducted. This device is approved for use in the handset described in this filing. SAR compliance for body-worn operations is restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 1 cm separation between the device including its antenna and the body of user. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.17 W/kg, < 0.10 W/kg, < 0.10 W/kg, and 1.49 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application ql3mRDx6wbKZa9esjHkjQA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 11/13/2018

Application Dated: 11/13/2018
Shenzhen UMIDIGI company Limited
405-407 Jinqi Zhigu Building, 4/F,
1 Tangling Road, Nanshan District, Shenzhen
Shenzhen,
China
 
Attention: Yu Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APL8A3
Name of Grantee:  Shenzhen UMIDIGI company Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Smart phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.00335  
CC 15E 5190.0  -  5230.0 0.00259  

Output power listed is conducted. This device is approved for use in the handset described in this filing. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ql3mRDx6wbKZa9esjHkjQA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen UMIDIGI company Limited
405-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen
Shenzhen,
China 		  Date of Grant: 11/13/2018

Application Dated: 11/13/2018
 
Attention: Yu Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APL8A3
Name of Grantee:  Shenzhen UMIDIGI company Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Smart phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.00335  
CC 15E 5190.0  -  5230.0 0.00259  

Output power listed is conducted. This device is approved for use in the handset described in this filing. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 3A8Pjw4z/M2rY5f1YkmuvA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 11/13/2018

Application Dated: 11/13/2018
Shenzhen UMIDIGI company Limited
405-407 Jinqi Zhigu Building, 4/F,
1 Tangling Road, Nanshan District, Shenzhen
Shenzhen,
China
 
Attention: Yu Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APL8A3
Name of Grantee:  Shenzhen UMIDIGI company Limited
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Smart phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.004645  

Output power listed is conducted. This device is approved for use in the handset described in this filing. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 3A8Pjw4z/M2rY5f1YkmuvA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen UMIDIGI company Limited
405-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen
Shenzhen,
China 		  Date of Grant: 11/13/2018

Application Dated: 11/13/2018
 
Attention: Yu Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APL8A3
Name of Grantee:  Shenzhen UMIDIGI company Limited
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Smart phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.004645  

Output power listed is conducted. This device is approved for use in the handset described in this filing. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application +32ZzHqMOt3UdD09jklrEA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 11/13/2018

Application Dated: 11/13/2018
Shenzhen UMIDIGI company Limited
405-407 Jinqi Zhigu Building, 4/F,
1 Tangling Road, Nanshan District, Shenzhen
Shenzhen,
China
 
Attention: Yu Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APL8A3
Name of Grantee:  Shenzhen UMIDIGI company Limited
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Smart phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application +32ZzHqMOt3UdD09jklrEA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen UMIDIGI company Limited
405-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen
Shenzhen,
China 		  Date of Grant: 11/13/2018

Application Dated: 11/13/2018
 
Attention: Yu Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APL8A3
Name of Grantee:  Shenzhen UMIDIGI company Limited
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Smart phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: