1. FCC ID
  2. 2APL8
  3. 2APL8Z2

FCC ID 2APL8Z2

Smart phone

by Shenzhen UMIDIGI company Limited

Grantee Code: 2APL8   Product Code: Z2
Latest application date: 2018-07-18

FCC ID Device Details

FCC ID2APL8Z2
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2APL8
Product CodeZ2
Applicant BusinessShenzhen UMIDIGI company Limited 🇨🇳
Related Domains 91umi.com
Equipment ClassSmart phone
Test FirmJianYan Testing Group Shenzhen Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2018-07-18
2402-2480 MHzOriginal Equipment2018-07-18
2402-2480 MHzOriginal Equipment2018-07-18
699.7-715.3 MHzOriginal Equipment2018-07-18

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2018-07-18PDF 1.4 MB
Internal photosInternal Photos2018-07-18PDF 1.9 MB
External photosExternal Photos2018-07-18PDF 803.2 KB
LabelID Label/Location Info2018-07-18PDF 124.8 KB
Test setupTest Setup Photos2018-07-18PDF 336.5 KB
Test setupTest Setup Photos2018-07-18PDF 401.2 KB
Test setupTest Setup Photos2018-07-18PDF 239.3 KB
Test reportTest Report2018-07-18PDF 3.8 MB
Test reportTest Report2018-07-18PDF 2.1 MB
Test reportTest Report2018-07-18PDF 1.8 MB
Test reportTest Report2018-07-18PDF 1.7 MB
Test reportTest Report2018-07-18PDF 3.3 MB
Test report LTE part 1Test Report2018-07-18PDF 5.5 MB
Test report LTE part 2Test Report2018-07-18PDF 4.5 MB
Test report LTE part 3Test Report2018-07-18PDF 4.7 MB
Test report LTE part 4Test Report2018-07-18PDF 3 MB
Cover letterCover Letter(s)2018-07-18PDF 75.4 KB
SAR reportRF Exposure Info2018-07-18PDF 5.6 MB
Block Diagram Metadata onlyBlock DiagramPDF 39.8 KB
Schematics Metadata onlySchematicsPDF 778.9 KB
Operational Description Metadata onlyOperational DescriptionPDF 51.9 KB
Software security Metadata onlySDR Software/Security InfPDF 245.9 KB
Parts list Metadata onlyParts List/Tune Up InfoPDF 530.7 KB
Tune up Metadata onlyParts List/Tune Up InfoPDF 69.2 KB

Application Information

Application IDwbFho0HVhP/YcEdUNaX97Q==
Final Action Date2018-07-18
Application PurposeOriginal Equipment
Applicant FRN0027449495
ModelZ2
Equipment ClassJBP - Part 15 Class B Computing Device Peripheral
Device DescriptionSmart phone
Responsible PartyYu Zhang, zhangyu@91umi.com , 86-0755-83220991
Test FirmBruce Zhang, JianYan Testing Group Shenzhen Co., Ltd., bruce.zhang@ccis-cb.com , +86 (0) 755 23118282
TCB Emailstuart.beck@nemko.com
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
wbFho0HVhP/YcEdUNaX97Q==2018-07-18Original Equipment
wQZt3y7BIUVZBwXxzGL1oQ==2018-07-18Original Equipment
JF/nRFHDVya3uxw9QxP/4A==2018-07-18Original Equipment
Bu+phljdz9OsAeppau8SrQ==2018-07-18Original Equipment
0GE7M3UySJwgJqTred8v/A==2018-07-18Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
15BCC
699.7-715.3 MHz0.02220.28ppm1M10G7D27
699.7-715.3 MHz0.01720.23ppm1M10W7D27
704-711 MHz0.02030.28ppm9M12G7D27
704-711 MHz0.0160.23ppm9M16W7D27
706.5-713.5 MHz0.02220.28ppm4M52G7D27
709-711 MHz0.02170.28ppm9M12G7D27
709-711 MHz0.01710.24ppm9M12W7D27
824.7-848.3 MHz0.05810.2ppm1M10W7D22H
825.5-847.5 MHz0.08240.24ppm2M72G7D22H
826.4-846.6 MHz0.02910.2ppm4M20F9W22H
829-844 MHz0.06280.24ppm9M12G7D22H
829-844 MHz0.05450.2ppm9M12W7D22H
1710.7-1754.3 MHz0.27290.11ppm1M10G7D27
1710.7-1754.3 MHz0.19320.09ppm1M10W7D27
1712.4-1752.6 MHz0.03420.1ppm4M20F9W27
1720-1745 MHz0.06520.11ppm18M2G7D27
1720-1745 MHz0.05260.09ppm18M0W7D27
1850.2-1909.8 MHz0.11510.1ppm250KGXW24E
1850.2-1909.8 MHz0.05470.09ppm248KG7W24E
1851.5-1908.5 MHz0.10140.11ppm2M72G7D24E
1851.5-1908.5 MHz0.08340.09ppm2M74W7D24E
1852.4-1907.6 MHz0.03770.1ppm4M20F9W24E
1860-1900 MHz0.08380.11ppm18M1G7D24E
1860-1900 MHz0.080.09ppm18M0W7D24E
2402-2480 MHz0.003210015CCC
2402-2480 MHz0.003215CCC
2412-2462 MHz0.044515CCC
2422-2452 MHz0.031715CCC
5180-5240 MHz0.005815ECC
5190-5230 MHz0.005615ECC

Grants

TCB Grant - Application wQZt3y7BIUVZBwXxzGL1oQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 07/18/2018

Application Dated: 07/18/2018
Shenzhen UMIDIGI company Limited
405-407 Jinqi Zhigu Building, 4/F,
1 Tangling Road, Nanshan District, Shenzhen
Shenzhen,
China
 
Attention: Yu Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APL8Z2
Name of Grantee:  Shenzhen UMIDIGI company Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Smart phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.0058  
CC 15E 5190.0  -  5230.0 0.0056  

Output power listed is conducted. This device is approved for use in the handset described in this filing. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application wQZt3y7BIUVZBwXxzGL1oQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen UMIDIGI company Limited
405-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen
Shenzhen,
China 		  Date of Grant: 07/18/2018

Application Dated: 07/18/2018
 
Attention: Yu Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APL8Z2
Name of Grantee:  Shenzhen UMIDIGI company Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Smart phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.0058  
CC 15E 5190.0  -  5230.0 0.0056  

Output power listed is conducted. This device is approved for use in the handset described in this filing. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application wbFho0HVhP/YcEdUNaX97Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 07/18/2018

Application Dated: 07/18/2018
Shenzhen UMIDIGI company Limited
405-407 Jinqi Zhigu Building, 4/F,
1 Tangling Road, Nanshan District, Shenzhen
Shenzhen,
China
 
Attention: Yu Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APL8Z2
Name of Grantee:  Shenzhen UMIDIGI company Limited
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Smart phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application wbFho0HVhP/YcEdUNaX97Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen UMIDIGI company Limited
405-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen
Shenzhen,
China 		  Date of Grant: 07/18/2018

Application Dated: 07/18/2018
 
Attention: Yu Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APL8Z2
Name of Grantee:  Shenzhen UMIDIGI company Limited
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Smart phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application JF/nRFHDVya3uxw9QxP/4A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 07/18/2018

Application Dated: 07/18/2018
Shenzhen UMIDIGI company Limited
405-407 Jinqi Zhigu Building, 4/F,
1 Tangling Road, Nanshan District, Shenzhen
Shenzhen,
China
 
Attention: Yu Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APL8Z2
Name of Grantee:  Shenzhen UMIDIGI company Limited
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Smart phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.00321  

Output power listed is conducted. This device is approved for use in the handset described in this filing. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application JF/nRFHDVya3uxw9QxP/4A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen UMIDIGI company Limited
405-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen
Shenzhen,
China 		  Date of Grant: 07/18/2018

Application Dated: 07/18/2018
 
Attention: Yu Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APL8Z2
Name of Grantee:  Shenzhen UMIDIGI company Limited
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Smart phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.00321  

Output power listed is conducted. This device is approved for use in the handset described in this filing. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Bu+phljdz9OsAeppau8SrQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 07/18/2018

Application Dated: 07/18/2018
Shenzhen UMIDIGI company Limited
405-407 Jinqi Zhigu Building, 4/F,
1 Tangling Road, Nanshan District, Shenzhen
Shenzhen,
China
 
Attention: Yu Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APL8Z2
Name of Grantee:  Shenzhen UMIDIGI company Limited
Equipment Class: Digital Transmission System
Notes: Smart phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.0445  
CC 15C 2422.0  -  2452.0 0.0317  
CC 15C 2402.0  -  2480.0 0.0032  

Output power listed is conducted. This device is approved for use in the handset described in this filing. SAR compliance for body-worn operations is restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 1 cm separation between the device including its antenna and the body of user. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.40 W/kg, < 0.10 W/kg, < 0.10 W/kg, and 0.53 W/kg, respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Bu+phljdz9OsAeppau8SrQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen UMIDIGI company Limited
405-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen
Shenzhen,
China 		  Date of Grant: 07/18/2018

Application Dated: 07/18/2018
 
Attention: Yu Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APL8Z2
Name of Grantee:  Shenzhen UMIDIGI company Limited
Equipment Class: Digital Transmission System
Notes: Smart phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.0445  
CC 15C 2422.0  -  2452.0 0.0317  
CC 15C 2402.0  -  2480.0 0.0032  

Output power listed is conducted. This device is approved for use in the handset described in this filing. SAR compliance for body-worn operations is restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 1 cm separation between the device including its antenna and the body of user. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.40 W/kg, < 0.10 W/kg, < 0.10 W/kg, and 0.53 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 0GE7M3UySJwgJqTred8v/A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 07/18/2018

Application Dated: 07/18/2018
Shenzhen UMIDIGI company Limited
405-407 Jinqi Zhigu Building, 4/F,
1 Tangling Road, Nanshan District, Shenzhen
Shenzhen,
China
 
Attention: Yu Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APL8Z2
Name of Grantee:  Shenzhen UMIDIGI company Limited
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Smart phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 0.1076 0.21  PM 245KGXW
22H 824.2  -  848.8 0.037 0.21  PM 248KG7W
22H 826.4  -  846.6 0.0291 0.2  PM 4M20F9W
24E 1850.2  -  1909.8 0.1151 0.1  PM 250KGXW
24E 1850.2  -  1909.8 0.0547 0.09  PM 248KG7W
24E 1852.4  -  1907.6 0.0377 0.1  PM 4M20F9W
27 1712.4  -  1752.6 0.0342 0.1  PM 4M20F9W
24E 1860.0  -  1900.0 0.0838 0.11  PM 18M1G7D
24E 1860.0  -  1900.0 0.08 0.09  PM 18M0W7D
24E 1851.5  -  1908.5 0.1014 0.11  PM 2M72G7D
24E 1851.5  -  1908.5 0.0834 0.09  PM 2M74W7D
27 1720.0  -  1745.0 0.0652 0.11  PM 18M2G7D
27 1720.0  -  1745.0 0.0526 0.09  PM 18M0W7D
27 1710.7  -  1754.3 0.2729 0.11  PM 1M10G7D
27 1710.7  -  1754.3 0.1932 0.09  PM 1M10W7D
22H 829.0  -  844.0 0.0628 0.24  PM 9M12G7D
22H 829.0  -  844.0 0.0545 0.2  PM 9M12W7D
22H 825.5  -  847.5 0.0824 0.24  PM 2M72G7D
22H 824.7  -  848.3 0.0581 0.2  PM 1M10W7D
27 704.0  -  711.0 0.0203 0.28  PM 9M12G7D
27 704.0  -  711.0 0.016 0.23  PM 9M16W7D
27 699.7  -  715.3 0.0222 0.28  PM 1M10G7D
27 699.7  -  715.3 0.0172 0.23  PM 1M10W7D
27 709.0  -  711.0 0.0217 0.28  PM 9M12G7D
27 709.0  -  711.0 0.0171 0.24  PM 9M12W7D
27 706.5  -  713.5 0.0222 0.28  PM 4M52G7D

Output power listed is ERP for Part 22 and Part 27 for frequencies below 1 GHz, EIRP for Part 24 and Part 27 for frequencies above 1 GHz. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 1 cm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.16 W/kg, 0.13 W/kg, 0.14 W/kg, and 0.53 W/kg, respectively.

EAS Grant - Application 0GE7M3UySJwgJqTred8v/A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen UMIDIGI company Limited
405-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen
Shenzhen,
China 		  Date of Grant: 07/18/2018

Application Dated: 07/18/2018
 
Attention: Yu Zhang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APL8Z2
Name of Grantee:  Shenzhen UMIDIGI company Limited
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Smart phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 0.1076 0.21  PM 245KGXW
22H 824.2  -  848.8 0.037 0.21  PM 248KG7W
22H 826.4  -  846.6 0.0291 0.2  PM 4M20F9W
24E 1850.2  -  1909.8 0.1151 0.1  PM 250KGXW
24E 1850.2  -  1909.8 0.0547 0.09  PM 248KG7W
24E 1852.4  -  1907.6 0.0377 0.1  PM 4M20F9W
27 1712.4  -  1752.6 0.0342 0.1  PM 4M20F9W
24E 1860.0  -  1900.0 0.0838 0.11  PM 18M1G7D
24E 1860.0  -  1900.0 0.08 0.09  PM 18M0W7D
24E 1851.5  -  1908.5 0.1014 0.11  PM 2M72G7D
24E 1851.5  -  1908.5 0.0834 0.09  PM 2M74W7D
27 1720.0  -  1745.0 0.0652 0.11  PM 18M2G7D
27 1720.0  -  1745.0 0.0526 0.09  PM 18M0W7D
27 1710.7  -  1754.3 0.2729 0.11  PM 1M10G7D
27 1710.7  -  1754.3 0.1932 0.09  PM 1M10W7D
22H 829.0  -  844.0 0.0628 0.24  PM 9M12G7D
22H 829.0  -  844.0 0.0545 0.2  PM 9M12W7D
22H 825.5  -  847.5 0.0824 0.24  PM 2M72G7D
22H 824.7  -  848.3 0.0581 0.2  PM 1M10W7D
27 704.0  -  711.0 0.0203 0.28  PM 9M12G7D
27 704.0  -  711.0 0.016 0.23  PM 9M16W7D
27 699.7  -  715.3 0.0222 0.28  PM 1M10G7D
27 699.7  -  715.3 0.0172 0.23  PM 1M10W7D
27 709.0  -  711.0 0.0217 0.28  PM 9M12G7D
27 709.0  -  711.0 0.0171 0.24  PM 9M12W7D
27 706.5  -  713.5 0.0222 0.28  PM 4M52G7D

Output power listed is ERP for Part 22 and Part 27 for frequencies below 1 GHz, EIRP for Part 24 and Part 27 for frequencies above 1 GHz. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 1 cm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.16 W/kg, 0.13 W/kg, 0.14 W/kg, and 0.53 W/kg, respectively.



Mail To: