FCC ID 2APNUCMABZ
RBS301
by Radio Bridge, Inc.
Grantee Code: 2APNU Product Code: CMABZ
Latest application date: 2018-12-04
FCC ID Device Details
| FCC ID | 2APNUCMABZ |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2APNU |
| Product Code | CMABZ |
| Applicant Business | Radio Bridge, Inc. 🇺🇸 |
| Related Domains |  radiobridge.com |
| Equipment Class | RBS301 |
| Test Firm | Element Materials Technology Minneapolis |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.3-914.9 MHz | Class II permissive change or modification of presently authorized equipment | 2018-12-04 |
| 902.3-914.9 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYCMABZ Grant Date: 02/08/2017 | 2018-11-30 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2018-12-04 | PDF 241.2 KB |
| user manual | Users Manual | 2018-11-30 | PDF 241.2 KB |
| Internal Photos | Internal Photos | 2018-12-04 | PDF 1.2 MB |
| Internal Photos | Internal Photos | 2018-11-30 | PDF 444 KB |
| External Photos | External Photos | 2018-12-04 | PDF 2.2 MB |
| External Photos | External Photos | 2018-11-30 | PDF 515.5 KB |
| ID label | ID Label/Location Info | 2018-11-30 | PDF 66.3 KB |
| Antenna Info | Operational Description | 2018-12-04 | PDF 2.2 MB |
| Test Setup Photos | Test Setup Photos | 2018-12-04 | PDF 506.6 KB |
| Test Report | Test Report | 2018-12-04 | PDF 1.2 MB |
| Cover Letter | Cover Letter(s) | 2018-12-04 | PDF 193.5 KB |
| Cover Letter | Cover Letter(s) | 2018-11-30 | PDF 306.3 KB |
| RF Exposure | RF Exposure Info | 2018-12-04 | PDF 1.1 MB |
Application Information
| Application ID | yvOh02yiW3aWY5CmZjmV7A== |
|---|---|
| Final Action Date | 2018-12-04 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0027465830 |
| Model | CMABZ |
| Frequency Range | 902.3-914.9 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | RBS301 |
| Responsible Party | Michael J Fette, CTO, mike.fette@radiobridge.com , 6122548219 |
| Test Firm | Renee Walker, Element Materials Technology Minneapolis, renee.walker@element.com  , 503-844-4066 |
| TCB Email | greg.kiemel@element.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change: This module may be installed in the Radio Bridge Model Wireless Multi-function Sensor using the chip antenna as described in this filing. The antenna must be installed to provide a separation distance of at least 20 cm from all persons. Power output is conducted at the antenna terminal. Limited Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| yvOh02yiW3aWY5CmZjmV7A== | 2018-12-04 | Class II permissive change or modification of presently authorized equipment |
| 94z7z0Ee5hUlO5wzbZu6nQ== | 2018-11-30 | Change in identification of presently authorized equipment. Original FCC ID: VPYCMABZ Grant Date: 02/08/2017 |
Grants
TCB Grant - Application yvOh02yiW3aWY5CmZjmV7A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 12/04/2018 Application Dated: 12/04/2018 |
| Radio Bridge, Inc. |
| 6272 Boone Ave N |
| Brooklyn Park, MN 55428 |
| Attention: Michael Fette , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APNUCMABZ |
| Name of Grantee: | Radio Bridge, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | RBS301 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0644 |
| Class II Permissive Change: This module may be installed in the Radio Bridge Model Wireless Multi-function Sensor using the chip antenna as described in this filing. The antenna must be installed to provide a separation distance of at least 20 cm from all persons. Power output is conducted at the antenna terminal. Limited Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
EAS Grant - Application yvOh02yiW3aWY5CmZjmV7A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Radio Bridge, Inc. 6272 Boone Ave N Brooklyn Park, MN 55428 United States |
Date of Grant: 12/04/2018 Application Dated: 12/04/2018 |
| Attention: Michael Fette , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APNUCMABZ |
| Name of Grantee: | Radio Bridge, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | RBS301 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0644 |
| Class II Permissive Change: This module may be installed in the Radio Bridge Model Wireless Multi-function Sensor using the chip antenna as described in this filing. The antenna must be installed to provide a separation distance of at least 20 cm from all persons. Power output is conducted at the antenna terminal. Limited Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 11/30/2018 Application Dated: 11/30/2018 |
| Radio Bridge, Inc. |
| 6272 Boone Ave N |
| Brooklyn Park, MN 55428 |
| Attention: Michael Fette , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APNUCMABZ |
| Name of Grantee: | Radio Bridge, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | RBS301 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0644 |
| Power output is conducted at the antenna terminal. Limited Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
EAS Grant - Application 94z7z0Ee5hUlO5wzbZu6nQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Radio Bridge, Inc. 6272 Boone Ave N Brooklyn Park, MN 55428 United States |
Date of Grant: 11/30/2018 Application Dated: 11/30/2018 |
| Attention: Michael Fette , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APNUCMABZ |
| Name of Grantee: | Radio Bridge, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | RBS301 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0644 |
| Power output is conducted at the antenna terminal. Limited Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
| Mail To: |