FCC ID 2APNUSFM10R2
RBS101
by Radio Bridge, Inc.
Grantee Code: 2APNU Product Code: SFM10R2
Latest application date: 2018-12-04
FCC ID Device Details
| FCC ID | 2APNUSFM10R2 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2APNU |
| Product Code | SFM10R2 |
| Applicant Business | Radio Bridge, Inc. 🇺🇸 |
| Related Domains |  radiobridge.com |
| Equipment Class | RBS101 |
| Test Firm | Element Materials Technology Minneapolis |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.138-904.663 MHz | Class II permissive change or modification of presently authorized equipment | 2018-12-04 |
| 902.138-904.663 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2ABA2SFM10R2 Grant Date: 01/13/2017 | 2018-11-30 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2018-12-04 | PDF 241.2 KB |
| user manual | Users Manual | 2018-11-30 | PDF 241.2 KB |
| Internal Photos | Internal Photos | 2018-12-04 | PDF 1,016.1 KB |
| Internal Photos | Internal Photos | 2018-11-30 | PDF 611.3 KB |
| External Photos | External Photos | 2018-12-04 | PDF 2.2 MB |
| External Photos | External Photos | 2018-11-30 | PDF 717.1 KB |
| ID label | ID Label/Location Info | 2018-11-30 | PDF 73.7 KB |
| Antenna Info | Operational Description | 2018-12-04 | PDF 2.2 MB |
| Test Setup Photos | Test Setup Photos | 2018-12-04 | PDF 719.7 KB |
| Test Report | Test Report | 2018-12-04 | PDF 1.2 MB |
| Cover Letter | Cover Letter(s) | 2018-12-04 | PDF 201.7 KB |
| Cover Letter | Cover Letter(s) | 2018-11-30 | PDF 244.1 KB |
| RF Exposure | RF Exposure Info | 2018-12-04 | PDF 1.2 MB |
Application Information
| Application ID | o6BURLxh6L0lckdr8X2BJw== |
|---|---|
| Final Action Date | 2018-12-04 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0027465830 |
| Model | SFM10R2 |
| Frequency Range | 902.138-904.663 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | RBS101 |
| Responsible Party | Michael J Fette, CTO, mike.fette@radiobridge.com , 6122548219 |
| Test Firm | Renee Walker, Element Materials Technology Minneapolis, renee.walker@element.com  , 503-844-4066 |
| TCB Email | greg.kiemel@element.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change: This module may be installed in the Radio Bridge Model Wireless Multi-function Sensor using the chip antenna as described in this filing. The antenna must be installed to provide a separation distance of at least 20 cm from all persons. Power output is conducted. This module may only be installed with the reference trace and antenna described in this filing. Any increase on the antenna gain or change on the trace layout, a C2PC filing is required. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| o6BURLxh6L0lckdr8X2BJw== | 2018-12-04 | Class II permissive change or modification of presently authorized equipment |
| RYdY0xNEGKd0DBFpl5l6Ow== | 2018-11-30 | Change in identification of presently authorized equipment. Original FCC ID: 2ABA2SFM10R2 Grant Date: 01/13/2017 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.138-904.663 MHz | 0.1761600 | 15C |
Grants
TCB Grant - Application RYdY0xNEGKd0DBFpl5l6Ow==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 11/30/2018 Application Dated: 11/30/2018 |
| Radio Bridge, Inc. |
| 6272 Boone Ave N |
| Brooklyn Park, MN 55428 |
| Attention: Michael Fette , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APNUSFM10R2 |
| Name of Grantee: | Radio Bridge, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RBS101 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1375 - 904.6625 | 0.17616 |
| Power output is conducted. This module may only be installed with the reference trace and antenna described in this filing. Any increase on the antenna gain or change on the trace layout, a C2PC filing is required. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. |
EAS Grant - Application RYdY0xNEGKd0DBFpl5l6Ow==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Radio Bridge, Inc. 6272 Boone Ave N Brooklyn Park, MN 55428 United States |
Date of Grant: 11/30/2018 Application Dated: 11/30/2018 |
| Attention: Michael Fette , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APNUSFM10R2 |
| Name of Grantee: | Radio Bridge, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RBS101 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1375 - 904.6625 | 0.17616 |
| Power output is conducted. This module may only be installed with the reference trace and antenna described in this filing. Any increase on the antenna gain or change on the trace layout, a C2PC filing is required. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 12/04/2018 Application Dated: 12/04/2018 |
| Radio Bridge, Inc. |
| 6272 Boone Ave N |
| Brooklyn Park, MN 55428 |
| Attention: Michael Fette , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APNUSFM10R2 |
| Name of Grantee: | Radio Bridge, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RBS101 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1375 - 904.6625 | 0.17616 |
| Class II Permissive Change: This module may be installed in the Radio Bridge Model Wireless Multi-function Sensor using the chip antenna as described in this filing. The antenna must be installed to provide a separation distance of at least 20 cm from all persons. Power output is conducted. This module may only be installed with the reference trace and antenna described in this filing. Any increase on the antenna gain or change on the trace layout, a C2PC filing is required. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. |
EAS Grant - Application o6BURLxh6L0lckdr8X2BJw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Radio Bridge, Inc. 6272 Boone Ave N Brooklyn Park, MN 55428 United States |
Date of Grant: 12/04/2018 Application Dated: 12/04/2018 |
| Attention: Michael Fette , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APNUSFM10R2 |
| Name of Grantee: | Radio Bridge, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RBS101 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1375 - 904.6625 | 0.17616 |
| Class II Permissive Change: This module may be installed in the Radio Bridge Model Wireless Multi-function Sensor using the chip antenna as described in this filing. The antenna must be installed to provide a separation distance of at least 20 cm from all persons. Power output is conducted. This module may only be installed with the reference trace and antenna described in this filing. Any increase on the antenna gain or change on the trace layout, a C2PC filing is required. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. |
| Mail To: |