FCC ID 2APPZ-W620W

Portable Wi-Fi Phone

by Fanvil Technology Co., Ltd

Grantee Code: 2APPZ   Product Code: W620W
Latest application date: 2025-09-12

FCC ID Device Details

FCC ID2APPZ-W620W
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2APPZ
Product CodeW620W
Applicant BusinessFanvil Technology Co., Ltd 🇨🇳
Related Domains fanvil.com
Equipment ClassPortable Wi-Fi Phone
Test FirmBay Area Compliance Laboratories Corp (Shenzhen)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5745-5825 MHzChange in identification of presently authorized equipment. Original FCC ID: 2BCUQ-W620W Grant Date: 08/07/20252025-09-12
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: 2BCUQ-W620W Grant Date: 08/07/20252025-09-12
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: 2BCUQ-W620W Grant Date: 08/07/20252025-09-12

Exhibits

DocumentTypeAvailableFile
External Photos Part 1External Photos2026-03-11PDF 3.8 MB
External Photos Part 2External Photos2026-03-11PDF 3.4 MB
Label and label locationID Label/Location Info2025-09-12PDF 227.6 KB
2.911(d)(5)(i) Attestation StatementAttestation Statements2025-09-12PDF 81.5 KB
2.911(d)(5)(ii) Attestation StatementAttestation Statements2025-09-12PDF 85.4 KB
US Agent Attestation LetterAttestation Statements2025-09-12PDF 97.1 KB
Authorization Letter from Original GranteeCover Letter(s)2025-09-12PDF 105.7 KB
Change in ID Request LetterCover Letter(s)2025-09-12PDF 167.1 KB
FCC Agent Authorization LetterCover Letter(s)2025-09-12PDF 95 KB
FCC Short-term Confidentiality RequestCover Letter(s)2025-09-12PDF 101.2 KB

Application Information

Application IDGGZVrOG0Ncwu4RCFlYMzGw==
Final Action Date2025-09-12
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: 2BCUQ-W620W Grant Date: 08/07/2025
Applicant FRN0027493469
ModelW620W
Frequency Range5745-5825 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionPortable Wi-Fi Phone
Responsible PartyMengjiao Hu, mengjiao.Hu@fanvil.com , 86-0755-26402199
Test FirmNana Liu, Bay Area Compliance Laboratories Corp (Shenzhen), qa.sz@baclcorp.com , 86-755-33320018
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Long-Term ConfidentialityYes
Modular EquipmentDoes not apply
Composite DeviceYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
GGZVrOG0Ncwu4RCFlYMzGw==2025-09-12Change in identification of presently authorized equipment. Original FCC ID: 2BCUQ-W620W Grant Date: 08/07/2025
5EDZPEVqYjbf3BdG5nlqKQ==2025-09-12Change in identification of presently authorized equipment. Original FCC ID: 2BCUQ-W620W Grant Date: 08/07/2025
0vlG+UorlNLj5ruiA/IWyw==2025-09-12Change in identification of presently authorized equipment. Original FCC ID: 2BCUQ-W620W Grant Date: 08/07/2025

Equipment Authorization

FrequencyOutputRulesGrant Notes
5180-5240 MHz0.02315ECC
5745-5825 MHz0.04115ECC
2412-2462 MHz0.15815CCC
2402-2480 MHz0.00615CCC
2402-2480 MHz0.0115CCC

Grants

TCB Grant - Application GGZVrOG0Ncwu4RCFlYMzGw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 09/12/2025

Application Dated: 09/12/2025
Fanvil Technology Co., Ltd
13th Floor, Building 2, Runzhi R&D Center,
Xin'an Street, Bao'an District,
Shenzhen, Guangdong, 518000,
China
 
Attention: Mengjiao Hu , Certified Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APPZ-W620W
Name of Grantee:  Fanvil Technology Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Portable Wi-Fi Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.023  
CC 15E 5745.0  -  5825.0 0.041  

Output power listed is conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head and body-worn accessory exposure conditions are 0.34 W/kg and 0.18 W/kg, respectively. The device supports 20MHz and 40MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 5EDZPEVqYjbf3BdG5nlqKQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 09/12/2025

Application Dated: 09/12/2025
Fanvil Technology Co., Ltd
13th Floor, Building 2, Runzhi R&D Center,
Xin'an Street, Bao'an District,
Shenzhen, Guangdong, 518000,
China
 
Attention: Mengjiao Hu , Certified Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APPZ-W620W
Name of Grantee:  Fanvil Technology Co., Ltd
Equipment Class: Digital Transmission System
Notes: Portable Wi-Fi Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.158  
CC 15C 2402.0  -  2480.0 0.006  

Output power listed is conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head and body-worn accessory exposure conditions are 1.05 W/kg and 0.64 W/kg, respectively. The device supports 20 MHz and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 0vlG+UorlNLj5ruiA/IWyw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 09/12/2025

Application Dated: 09/12/2025
Fanvil Technology Co., Ltd
13th Floor, Building 2, Runzhi R&D Center,
Xin'an Street, Bao'an District,
Shenzhen, Guangdong, 518000,
China
 
Attention: Mengjiao Hu , Certified Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APPZ-W620W
Name of Grantee:  Fanvil Technology Co., Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Portable Wi-Fi Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Output power listed is conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head and body-worn accessory exposure conditions are 0.14 W/kg and 0.07 W/kg, respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.