FCC ID 2APRD-GEN3LONG
Pallet Tracker
by CHEP
Grantee Code: 2APRD Product Code: GEN3LONG
Latest application date: 2021-08-18
FCC ID Device Details
| FCC ID | 2APRD-GEN3LONG |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2APRD |
| Product Code | GEN3LONG |
| Applicant Business | CHEP 🇺🇸 |
| Related Domains |  brambles.com |
| Equipment Class | Pallet Tracker |
| Test Firm | SHENZHEN STS TEST SERVICES CO.,LTD. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2APRD-ULTRASHORT Grant Date: 08/10/2021 | 2021-08-18 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2APRD-ULTRASHORT Grant Date: 08/10/2021 | 2021-08-18 |
| 699.1-715.9 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2APRD-ULTRASHORT Grant Date: 08/10/2021 | 2021-08-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| user manual | Users Manual | 2021-08-18 | PDF 469.5 KB |
| Internal Photos | Internal Photos | 2021-08-18 | PDF 1.4 MB |
| External Photos | External Photos | 2021-08-18 | PDF 826.2 KB |
| LABEL | ID Label/Location Info | 2021-08-18 | PDF 156.1 KB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2021-08-18 | PDF 11.7 KB |
| FCC Change in ID Authorization Letter | Cover Letter(s) | 2021-08-18 | PDF 175.5 KB |
| FCC Request for change in ID Rev 2.1 | Cover Letter(s) | 2021-08-18 | PDF 85.3 KB |
| FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2021-08-18 | PDF 73.2 KB |
| FCC Software Configuration Control Declaration | Cover Letter(s) | 2021-08-18 | PDF 70.5 KB |
Application Information
| Application ID | haGn0+NyqJ2xa2R0rgQTcg== |
|---|---|
| Final Action Date | 2021-08-18 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: 2APRD-ULTRASHORT Grant Date: 08/10/2021 |
| Applicant FRN | 0027506237 |
| Model | GEN3LONG |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Pallet Tracker |
| Responsible Party | Sandeep Bandil, Vice President, IoT Edge Products, sandeep.bandil@brambles.com , 4082036612 |
| Technical Contact | CHEP, Sandeep.bandil@brambles.com |
| Test Firm | Bovey Yang, SHENZHEN STS TEST SERVICES CO.,LTD., Bovey@stsapp.com  , +86 755-36886288 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change is for this filling.Output power listed is conducted power.This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| haGn0+NyqJ2xa2R0rgQTcg== | 2021-08-18 | Change in identification of presently authorized equipment. Original FCC ID: 2APRD-ULTRASHORT Grant Date: 08/10/2021 |
| Zl2Wifx2Vo2vXXYmOYvQUQ== | 2021-08-18 | Change in identification of presently authorized equipment. Original FCC ID: 2APRD-ULTRASHORT Grant Date: 08/10/2021 |
| FpIWrQDwfiR7rsLsT9a0ag== | 2021-08-18 | Change in identification of presently authorized equipment. Original FCC ID: 2APRD-ULTRASHORT Grant Date: 08/10/2021 |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 699.1-715.9 MHz | 0.1059 | 0.019ppm | 125KG7D | 27 | |
| 699.1-715.9 MHz | 0.0838 | 0.019ppm | 192KW7D | 27 | |
| 704-711 MHz | 0.1923 | 0.05ppm | 1M11G7D | 27 | |
| 704-711 MHz | 0.1799 | 0.05ppm | 941KW7D | 27 | |
| 777.1-786.9 MHz | 0.0889 | 0.018ppm | 124KG7D | 27 | |
| 777.1-786.9 MHz | 0.0731 | 0.018ppm | 189KW7D | 27 | |
| 782 MHz | 0.1914 | 0.051ppm | 1M10G7D | 27 | |
| 782 MHz | 0.1871 | 0.051ppm | 941KW7D | 27 | |
| 819 MHz | 0.1754 | 0.019ppm | 1M10G7D | 9 | |
| 819 MHz | 0.1618 | 0.019ppm | 945KW7D | 9 | |
| 824.1-848.9 MHz | 0.1021 | 0.019ppm | 125KG7D | 22H | |
| 824.1-848.9 MHz | 0.0807 | 0.019ppm | 192KW7D | 22H | |
| 829-844 MHz | 0.1778 | 0.051ppm | 940KW7D | 22H | |
| 829-844 MHz | 844 | 0.051ppm | 1M10G7D | 22H | |
| 831.5-841.5 MHz | 0.1968 | 0.021ppm | 1M11G7D | 22 | |
| 831.5-841.5 MHz | 0.1936 | 0.021ppm | 941KW7D | 22 | |
| 1710.1-1754.9 MHz | 0.078 | 0.019ppm | 128KG7D | 27 | |
| 1710.1-1754.9 MHz | 0.0628 | 0.019ppm | 191KW7D | 27 | |
| 1720-1745 MHz | 0.1514 | 0.019ppm | 1M11G7D | 27 | |
| 1720 MHz | 0.151 | 0.019ppm | 949KW7D | 27 | |
| 1850.1-1909.9 MHz | 0.0962 | 0.019ppm | 128KG7D | 24E | |
| 1850.1-1909.9 MHz | 0.0738 | 0.019ppm | 191KW7D | 24E | |
| 1850.2-1909.08 MHz | 0.5297 | 0.019ppm | 248KGXW | 24E | |
| 1850.2-1909.08 MHz | 0.5164 | 0.018ppm | 244KG7W | 24E | |
| 1860-1900 MHz | 0.16 | 0.018ppm | 1M11G7D | 24E | |
| 1860-1900 MHz | 0.1528 | 0.018ppm | 942KW7D | 24E | |
| 2402-2480 MHz | 0.0068000 | 15C | CC | ||
| 2412-2462 MHz | 0.0558000 | 15C | CC |
Grants
TCB Grant - Application Zl2Wifx2Vo2vXXYmOYvQUQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 08/18/2021 Application Dated: 08/18/2021 |
| CHEP |
| 2901 Tasman Drive Suite 107 |
| Santa Clara, CA 95054 |
| Attention: Sandeep Bandil , Vice President, IoT Edge Products |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APRD-GEN3LONG |
| Name of Grantee: | CHEP |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Pallet Tracker |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0068 |
| Class II permissive change is for this filling. Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Zl2Wifx2Vo2vXXYmOYvQUQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
CHEP 2901 Tasman Drive Suite 107 Santa Clara, CA 95054 United States |
Date of Grant: 08/18/2021 Application Dated: 08/18/2021 |
| Attention: Sandeep Bandil , Vice President, IoT Edge Products |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APRD-GEN3LONG |
| Name of Grantee: | CHEP |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Pallet Tracker |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0068 |
| Class II permissive change is for this filling. Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 08/18/2021 Application Dated: 08/18/2021 |
| CHEP |
| 2901 Tasman Drive Suite 107 |
| Santa Clara, CA 95054 |
| Attention: Sandeep Bandil , Vice President, IoT Edge Products |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APRD-GEN3LONG |
| Name of Grantee: | CHEP |
| Equipment Class: | Digital Transmission System |
| Notes: | Pallet Tracker |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0558 |
| Class II permissive change is for this filling.Output power listed is conducted power.This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application haGn0+NyqJ2xa2R0rgQTcg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
CHEP 2901 Tasman Drive Suite 107 Santa Clara, CA 95054 United States |
Date of Grant: 08/18/2021 Application Dated: 08/18/2021 |
| Attention: Sandeep Bandil , Vice President, IoT Edge Products |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APRD-GEN3LONG |
| Name of Grantee: | CHEP |
| Equipment Class: | Digital Transmission System |
| Notes: | Pallet Tracker |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0558 |
| Class II permissive change is for this filling.Output power listed is conducted power.This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 08/18/2021 Application Dated: 08/18/2021 |
| CHEP |
| 2901 Tasman Drive Suite 107 |
| Santa Clara, CA 95054 |
| Attention: Sandeep Bandil , Vice President, IoT Edge Products |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APRD-GEN3LONG |
| Name of Grantee: | CHEP |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Pallet Tracker |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.1912 | 0.039 PM | 249KGXW | |
| 22H | 824.2 - 848.8 | 1.1535 | 0.039 PM | 248KG7W | |
| 24E | 1850.2 - 1909.08 | 0.5297 | 0.019 PM | 248KGXW | |
| 24E | 1850.2 - 1909.08 | 0.5164 | 0.018 PM | 244KG7W | |
| 24E | 1860.0 - 1900.0 | 0.16 | 0.018 PM | 1M11G7D | |
| 24E | 1860.0 - 1900.0 | 0.1528 | 0.018 PM | 942KW7D | |
| 27 | 1720.0 - 1745.0 | 0.1514 | 0.019 PM | 1M11G7D | |
| 27 | 1720.0 - 1720.0 | 0.151 | 0.019 PM | 949KW7D | |
| 22H | 829.0 - 844.0 | 844.0 | 0.051 PM | 1M10G7D | |
| 22H | 829.0 - 844.0 | 0.1778 | 0.051 PM | 940KW7D | |
| 27 | 704.0 - 711.0 | 0.1923 | 0.05 PM | 1M11G7D | |
| 27 | 704.0 - 711.0 | 0.1799 | 0.05 PM | 941KW7D | |
| 27 | 782.0 - 782.0 | 0.1914 | 0.051 PM | 1M10G7D | |
| 27 | 782.0 - 782.0 | 0.1871 | 0.051 PM | 941KW7D | |
| 22 | 831.5 - 841.5 | 0.1968 | 0.021 PM | 1M11G7D | |
| 22 | 831.5 - 841.5 | 0.1936 | 0.021 PM | 941KW7D | |
| 90 | 819.0 - 819.0 | 0.1754 | 0.019 PM | 1M10G7D | |
| 90 | 819.0 - 819.0 | 0.1618 | 0.019 PM | 945KW7D | |
| 24E | 1850.1 - 1909.9 | 0.0962 | 0.019 PM | 128KG7D | |
| 24E | 1850.1 - 1909.9 | 0.0738 | 0.019 PM | 191KW7D | |
| 27 | 1710.1 - 1754.9 | 0.078 | 0.019 PM | 128KG7D | |
| 27 | 1710.1 - 1754.9 | 0.0628 | 0.019 PM | 191KW7D | |
| 22H | 824.1 - 848.9 | 0.1021 | 0.019 PM | 125KG7D | |
| 22H | 824.1 - 848.9 | 0.0807 | 0.019 PM | 192KW7D | |
| 27 | 699.1 - 715.9 | 0.1059 | 0.019 PM | 125KG7D | |
| 27 | 699.1 - 715.9 | 0.0838 | 0.019 PM | 192KW7D | |
| 27 | 777.1 - 786.9 | 0.0889 | 0.018 PM | 124KG7D | |
| 27 | 777.1 - 786.9 | 0.0731 | 0.018 PM | 189KW7D |
| Class II permissive change is for this filling. Power output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Endusers must be provided with operating procedures for satisfying RF exposure compliance. |
EAS Grant - Application FpIWrQDwfiR7rsLsT9a0ag==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
CHEP 2901 Tasman Drive Suite 107 Santa Clara, CA 95054 United States |
Date of Grant: 08/18/2021 Application Dated: 08/18/2021 |
| Attention: Sandeep Bandil , Vice President, IoT Edge Products |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APRD-GEN3LONG |
| Name of Grantee: | CHEP |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Pallet Tracker |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.1912 | 0.039 PM | 249KGXW | |
| 22H | 824.2 - 848.8 | 1.1535 | 0.039 PM | 248KG7W | |
| 24E | 1850.2 - 1909.08 | 0.5297 | 0.019 PM | 248KGXW | |
| 24E | 1850.2 - 1909.08 | 0.5164 | 0.018 PM | 244KG7W | |
| 24E | 1860.0 - 1900.0 | 0.16 | 0.018 PM | 1M11G7D | |
| 24E | 1860.0 - 1900.0 | 0.1528 | 0.018 PM | 942KW7D | |
| 27 | 1720.0 - 1745.0 | 0.1514 | 0.019 PM | 1M11G7D | |
| 27 | 1720.0 - 1720.0 | 0.151 | 0.019 PM | 949KW7D | |
| 22H | 829.0 - 844.0 | 844.0 | 0.051 PM | 1M10G7D | |
| 22H | 829.0 - 844.0 | 0.1778 | 0.051 PM | 940KW7D | |
| 27 | 704.0 - 711.0 | 0.1923 | 0.05 PM | 1M11G7D | |
| 27 | 704.0 - 711.0 | 0.1799 | 0.05 PM | 941KW7D | |
| 27 | 782.0 - 782.0 | 0.1914 | 0.051 PM | 1M10G7D | |
| 27 | 782.0 - 782.0 | 0.1871 | 0.051 PM | 941KW7D | |
| 22 | 831.5 - 841.5 | 0.1968 | 0.021 PM | 1M11G7D | |
| 22 | 831.5 - 841.5 | 0.1936 | 0.021 PM | 941KW7D | |
| 90 | 819.0 - 819.0 | 0.1754 | 0.019 PM | 1M10G7D | |
| 90 | 819.0 - 819.0 | 0.1618 | 0.019 PM | 945KW7D | |
| 24E | 1850.1 - 1909.9 | 0.0962 | 0.019 PM | 128KG7D | |
| 24E | 1850.1 - 1909.9 | 0.0738 | 0.019 PM | 191KW7D | |
| 27 | 1710.1 - 1754.9 | 0.078 | 0.019 PM | 128KG7D | |
| 27 | 1710.1 - 1754.9 | 0.0628 | 0.019 PM | 191KW7D | |
| 22H | 824.1 - 848.9 | 0.1021 | 0.019 PM | 125KG7D | |
| 22H | 824.1 - 848.9 | 0.0807 | 0.019 PM | 192KW7D | |
| 27 | 699.1 - 715.9 | 0.1059 | 0.019 PM | 125KG7D | |
| 27 | 699.1 - 715.9 | 0.0838 | 0.019 PM | 192KW7D | |
| 27 | 777.1 - 786.9 | 0.0889 | 0.018 PM | 124KG7D | |
| 27 | 777.1 - 786.9 | 0.0731 | 0.018 PM | 189KW7D |
| Class II permissive change is for this filling. Power output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Endusers must be provided with operating procedures for satisfying RF exposure compliance. |
| Mail To: |