FCC ID 2APRGRT02
Wi-Fi Router
by Shenzhen Cudy Technology Co., Ltd.
Grantee Code: 2APRG Product Code: RT02
Latest application date: 2023-06-08
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2023-06-08 |
| 5180-5240 MHz | Original Equipment | 2023-06-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2023-06-08 | PDF 636.2 KB |
| Internal photos | Internal Photos | 2023-06-08 | PDF 1.8 MB |
| External photos | External Photos | 2023-06-08 | PDF 1.1 MB |
| Label and label location | ID Label/Location Info | 2023-06-08 | PDF 388.3 KB |
| Test setup photos | Test Setup Photos | 2023-06-08 | PDF 630.9 KB |
| Antenna information | Test Report | 2023-06-08 | PDF 4.4 MB |
| Appendix A test data 2G4WLAN part 1 | Test Report | 2023-06-08 | PDF 5.7 MB |
| Appendix A test data 2G4WLAN part 2 | Test Report | 2023-06-08 | PDF 4.1 MB |
| Appendix B test data 5GWLAN band 1 part 1 | Test Report | 2023-06-08 | PDF 3.1 MB |
| Appendix B test data 5GWLAN band 1 part 2 | Test Report | 2023-06-08 | PDF 3.3 MB |
| Appendix B test data 5GWLAN band 1 part 3 | Test Report | 2023-06-08 | PDF 5 MB |
| Appendix C test data 5GWLAN band 2A part 1 | Test Report | 2023-06-08 | PDF 3.8 MB |
| Appendix C test data 5GWLAN band 2A part 2 | Test Report | 2023-06-08 | PDF 4 MB |
| Appendix C test data 5GWLAN band 2A part 3 | Test Report | 2023-06-08 | PDF 3.8 MB |
| Appendix D test data 5GWLAN band 2C part 1 | Test Report | 2023-06-08 | PDF 3.9 MB |
| Appendix D test data 5GWLAN band 2C part 2 | Test Report | 2023-06-08 | PDF 4.3 MB |
| Appendix D test data 5GWLAN band 2C part 3 | Test Report | 2023-06-08 | PDF 5.6 MB |
| Appendix E test data 5GWLAN band 3 part 1 | Test Report | 2023-06-08 | PDF 4 MB |
| Appendix E test data 5GWLAN band 3 part 2 | Test Report | 2023-06-08 | PDF 5.1 MB |
| Test Report 2G4WLAN | Test Report | 2023-06-08 | PDF 1.5 MB |
| Test Report 5GWLAN band 1 | Test Report | 2023-06-08 | PDF 1.5 MB |
| Test Report 5GWLAN band 2 | Test Report | 2023-06-08 | PDF 2.1 MB |
| Test Report 5GWLAN band 3 | Test Report | 2023-06-08 | PDF 1.5 MB |
| Test Report DFS part 1 | Test Report | 2023-06-08 | PDF 3.6 MB |
| Test Report DFS part 2 | Test Report | 2023-06-08 | PDF 4.4 MB |
| Test Report DFS part 3 | Test Report | 2023-06-08 | PDF 5.5 MB |
| Test Report DFS part 4 | Test Report | 2023-06-08 | PDF 4.6 MB |
| Agent attestation letter | Attestation Statements | 2023-06-08 | PDF 212.4 KB |
| Covered equipment identification letter | Attestation Statements | 2023-06-08 | PDF 167.7 KB |
| Covered equipment letter | Attestation Statements | 2023-06-08 | PDF 169.7 KB |
| Confidentiality request letter | Cover Letter(s) | 2023-06-08 | PDF 158.2 KB |
| Letter of declaration disable channel 12 and 13 by software | Cover Letter(s) | 2023-06-08 | PDF 155.2 KB |
| Letter of declaration model difference | Cover Letter(s) | 2023-06-08 | PDF 75.3 KB |
| RF exposure evaluation | RF Exposure Info | 2023-06-08 | PDF 906.3 KB |
| Block diagram Metadata only | Block Diagram | PDF 110.7 KB | |
| Schematic Metadata only | Schematics | PDF 594.5 KB | |
| Letter of declaration software configuration control Metadata only | Operational Description | PDF 71.3 KB | |
| Letter of declaration unii device Metadata only | Operational Description | PDF 193.2 KB | |
| Letter of declaration unii device software security requirements Metadata only | Operational Description | PDF 119.7 KB | |
| Operation description Metadata only | Operational Description | PDF 128.8 KB |
Application Information
| Application ID | 9llB5r/5A7ryhyJxB3J9PA== |
|---|---|
| Final Action Date | 2023-06-08 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0027506245 |
| Model | RT02 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wi-Fi Router |
| Responsible Party | Zhihong Chen, Director, sales@cudy.com  , +8613168072961 |
| Test Firm | Gavin Liang, Shenzhen LCS Compliance Testing Laboratory Ltd., gavin.liang@lcs-cert.com  , 0755-82591330 |
| TCB Email | o.kneip@kl-certification.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Power listed is maximum peak conducted output power. This device supports 20 MHz and 40 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. The device is a 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 9llB5r/5A7ryhyJxB3J9PA== | 2023-06-08 | Original Equipment |
| 3DAHBKHWb4G/kqHYlOKQUA== | 2023-06-08 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application 9llB5r/5A7ryhyJxB3J9PA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 06/08/2023 Application Dated: 06/07/2023 |
| Shenzhen Cudy Technology Co., Ltd. |
| Room A606, Gaoxinqi Industrial Park, |
| Liuxianyi Road, Baoan District |
| Shenzhen, 518101 China |
| Attention: Zhihong Chen , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APRGRT02 |
| Name of Grantee: | Shenzhen Cudy Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi Router |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2065 |
| Power listed is maximum peak conducted output power. This device supports 20 MHz and 40 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. The device is a 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 9llB5r/5A7ryhyJxB3J9PA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Cudy Technology Co., Ltd. Room A606, Gaoxinqi Industrial Park, Liuxianyi Road, Baoan District Shenzhen, 518101 China |
Date of Grant: 06/08/2023 Application Dated: 06/07/2023 |
| Attention: Zhihong Chen , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APRGRT02 |
| Name of Grantee: | Shenzhen Cudy Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi Router |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2065 |
| Power listed is maximum peak conducted output power. This device supports 20 MHz and 40 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. The device is a 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 06/08/2023 Application Dated: 06/07/2023 |
| Shenzhen Cudy Technology Co., Ltd. |
| Room A606, Gaoxinqi Industrial Park, |
| Liuxianyi Road, Baoan District |
| Shenzhen, 518101 China |
| Attention: Zhihong Chen , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APRGRT02 |
| Name of Grantee: | Shenzhen Cudy Technology Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi Router |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.1549 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.1132 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.1157 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.2133 |
| Power listed is maximum peak conducted output power. This device supports 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. The device is a 802.11 a/n/ac/ax device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 3DAHBKHWb4G/kqHYlOKQUA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Cudy Technology Co., Ltd. Room A606, Gaoxinqi Industrial Park, Liuxianyi Road, Baoan District Shenzhen, 518101 China |
Date of Grant: 06/08/2023 Application Dated: 06/07/2023 |
| Attention: Zhihong Chen , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2APRGRT02 |
| Name of Grantee: | Shenzhen Cudy Technology Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi Router |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.1549 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.1132 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.1157 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.2133 |
| Power listed is maximum peak conducted output power. This device supports 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. The device is a 802.11 a/n/ac/ax device in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |