MB-PWDIST MB-PWDIST RF Exposure Info SZEM180900829902-MPE TURISPORT SL

TURISPORT SL MB-PWDIST

Page 1 of MB-PWDIST MB-PWDIST RF Exposure Info SZEM180900829902-MPE TURISPORT SL
Page 2 of MB-PWDIST MB-PWDIST RF Exposure Info SZEM180900829902-MPE TURISPORT SL
Page 3 of MB-PWDIST MB-PWDIST RF Exposure Info SZEM180900829902-MPE TURISPORT SL
Page 4 of MB-PWDIST MB-PWDIST RF Exposure Info SZEM180900829902-MPE TURISPORT SL
Page 5 of MB-PWDIST MB-PWDIST RF Exposure Info SZEM180900829902-MPE TURISPORT SL
Page 6 of MB-PWDIST MB-PWDIST RF Exposure Info SZEM180900829902-MPE TURISPORT SL
Page 7 of MB-PWDIST MB-PWDIST RF Exposure Info SZEM180900829902-MPE TURISPORT SL
Page 8 of MB-PWDIST MB-PWDIST RF Exposure Info SZEM180900829902-MPE TURISPORT SL
Page 9 of MB-PWDIST MB-PWDIST RF Exposure Info SZEM180900829902-MPE TURISPORT SL
Page 10 of MB-PWDIST MB-PWDIST RF Exposure Info SZEM180900829902-MPE TURISPORT SL

SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
No. 1 Workshop, M-10, Middle Section, Science & Technology Park,
Shenzhen, China 518057
Telephone:
Fax:
Email:
Report No.: SZEM180900829902
Page:
1 of 10
+86 (0) 755 2601 2053
+86 (0) 755 2671 0594
ee.shenzhen@sgs.com
Human Exposure Report
Application No.:
SZEM1809008299CR
Applicant:
TURISPORT SL
Address of Applicant:
CTRA. DE VIC 99-101 08160 MONTMELO BARCELONA SPAIN
BARCELONA SPAIN 08160
Manufacturer/ Factory:
SHENZHEN VLG WIRELESS TECHNOLOGY CO., LTD
Address of Manufacturer/
Factory:
3-4F, 1ST BLDG, 1ST SUB-PARK OF TAOHUAYUAN HI-TECH PARK,
XIXIANG, BAOAN, SHENZHEN
Equipment Under Test (EUT):
EUT Name:
MB-PWDIST
Model No.:
POWERDISTANCE
Trade mark:
MINIBATT
FCC ID:
2APUMMB-PWDIST
Standards:
47 CFR PART 1, SUBPART I, SECTION 1.1310
Date of Receipt:
2018-09-17
Date of Test:
2018-09-20 TO 2018-11-19
Date of Issue:
2018-11-21
Test Result :
Pass*
* In the configuration tested, the EUT complied with the standards specified above.
Keny Xu
EMC Laboratory Manager
The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report.
If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new
system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS
International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS
International Electrical Approvals in writing.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180900829902
Page:
2 of 10
Revision Record
Version
Chapter
01
Date
2018-11-21
Modifier
Remark
Original
Authorized for issue by:
Peter Geng /Project Engineer
Eric Fu /Reviewer
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction
issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s
instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction
documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this
document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s)
are retained for 90 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180900829902
Page:
3 of 10
Contents
Page
COVER PAGE ............................................................................................................................................1
CONTENTS ................................................................................................................................................3
GENERAL INFORMATION ........................................................................................................................4
2.1
2.2
2.3
2.4
2.5
2.6
DETAILS OF E.U.T. ...................................................................................................................................4
DESCRIPTION OF SUPPORT UNITS .............................................................................................................4
TEST LOCATION ........................................................................................................................................5
TEST FACILITY ..........................................................................................................................................5
DEVIATION FROM STANDARDS ...................................................................................................................5
ABNORMALITIES FROM STANDARD CONDITIONS..........................................................................................5
EQUIPMENTS USED DURING TEST ........................................................................................................6
TEST RESULTS .........................................................................................................................................7
4.1 RF EXPOSURE TEST .................................................................................................................................7
4.1.1 E.U.T. Operation ............................................................................................................................7
4.1.2 Measurement Data.........................................................................................................................8
PHOTOGRAPHS ......................................................................................................................................10
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction
issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s
instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction
documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this
document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s)
are retained for 90 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180900829902
Page:
4 of 10
General Information
2.1 Details of E.U.T.
Power supply:
AC Power Supply information:
MODEL: HJ-AD24-190100
INPUT: AC 100-240V, 50/60Hz, 0.7A
OUTPUT: DC 19V, 1000mA
For wireless charger:
Output: 5W
Cable:
DC line: 180cm, unshielded
Operation frequency:
109.62-130.61 kHz
Modulation type:
Load modulation
Antenna type:
Inductive Loop Coil Antenna
2.2 Description of Support Units
Description
Manufacturer
Model No.
Serial No.
Mobile Phone
SAMSUNG
SM-G9500
R28J9140LPB
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction
issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s
instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction
documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this
document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s)
are retained for 90 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180900829902
Page:
5 of 10
2.3 Test Location
All tests were performed at:
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch
No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China.
518057.
Tel: +86 755 2601 2053
Fax: +86 755 2671 0594
No tests were sub-contracted.
2.4 Test Facility
The test facility is recognized, certified, or accredited by the following organizations:
• CNAS (No. CNAS L2929)
CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC
Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration
Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration
Laboratories) for the competence in the field of testing.
• A2LA (Certificate No. 3816.01)
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the
American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01.
• VCCI
The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz,
Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port
Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have
been registered in accordance with the Regulations for Voluntary Control Measures with Registration
No.: G-20026, R-14188, C-12383 and T-11153 respectively.
• FCC –Designation Number: CN1178
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized
as an accredited testing laboratory.
Designation Number: CN1178. Test Firm Registration Number: 406779.
• Innovation, Science and Economic Development Canada
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized
by ISED as an accredited testing laboratory.
CAB identifier: CN0006.
IC#: 4620C.
2.5 Deviation from Standards
None.
2.6 Abnormalities from Standard Conditions
None.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction
issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s
instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction
documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this
document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s)
are retained for 90 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180900829902
Page:
6 of 10
Equipments Used during Test
Cal. Due date
Item
Test Equipment
Manufacturer
Model No.
Inventory
No.
Shielding Room
SAEMC
MSR733
SEM001-09
2020-05-09
Electric and
Magnetic Field
Analyzer
Narda
EHP-50F
EMC092
2019-02-06
(yyyy-mm-dd)
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction
issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s
instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction
documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this
document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s)
are retained for 90 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180900829902
Page:
7 of 10
Test Results
4.1 RF Exposure test
Test Requirement:
47 CFR PART 1, Subpart I, Section 1.1310
Measurement Distance:
15cm
Limit:
Frequency range Electric field strength Magnetic field strength Power density Averaging time
(MHz)
(V/m)
(A/m)
(mW/cm2)
(minutes)
(A) Limits for Occupational/Controlled Exposures
0.3-3.0
614
1.63
*(100)
3.0-30
1842/f
4.89/f
*(900/f2)
30-300
61.4
0.163
1.0
300-1500
f/300
1500-100,000
(B) Limits for General Population/Uncontrolled Exposure
0.3-1.34
614
1.63
*(100)
30
1.34-30
824/f
2.19/f
*(180/f2)
30
30-300
27.5
0.073
0.2
30
300-1500
f/1500
30
1500-100,000
1.0
30
F=frequency in MHz
*=Plane-wave equivalent power density
RF exposure compliance will need to be determined with respect to 1.1307(c) and (d) of the FCC rules.
The emissions should be within the limits at 300kHz in Table 1 of 1.1310(use the 300kHz limits for
150kHz:614V/m,1.63A/m).
4.1.1 E.U.T. Operation
Operating Environment:
Temperature:
25.0 °C
Humidity:
51 % RH
Atmospheric Pressure: 1015 mbar
EUT Operation:
This device has been tested the worst status of full load and the device has been tested with mobile
phone at zero charge, intermediate charge, and full charge.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction
issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s
instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction
documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this
document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s)
are retained for 90 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180900829902
Page:
8 of 10
4.1.2
Measurement Data
Output Voltage=DC 5V; The max output power =5W;Calculation of resistor value=5Ω
Electric Field Emissions
Operation
frequency
126.2 kHz
Test Distance
Test Position
Probe Measure
Result (V/m)
50% Limit
Side 1
1.42
307
Side 2
1.92
307
Side 3
1.90
307
Side 4
1.86
307
Top
2.25
307
Test Position
Probe Measure
Result (A/m)
50% Limit
Side 1
0.0256
0.815
Side 2
0.0285
0.815
Side 3
0.0279
0.815
Side 4
0.0282
0.815
Top
0.0425
0.815
(cm)
15
(V/m)
Magnetic Field Emissions
Operation
frequency
126.2 kHz
Test Distance
(cm)
15
(A/m)
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction
issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s
instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction
documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this
document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s)
are retained for 90 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180900829902
Page:
9 of 10
Mobile phone has been charge at zero charge, intermediate charge, and full charge.
Electric Field Emissions
Operation
frequency
Test
Distance
Test
15
50%Limit
Position
zero
charge
intermediate
charge
full
charge
(V/m)
Side 1
1.42
1.24
1.33
307
Side 2
1.92
1.46
1.62
307
Side 3
1.90
1.88
1.74
307
Side 4
1.86
1.62
1.69
307
Top
2.25
2.17
1.85
307
(cm)
126.2 kHz
Probe Measure Result(V/m)
Magnetic Field Emissions
Operation
frequency
Test
Distance
Test
15
50%Limit
Position
zero
charge
intermediate
charge
full
charge
(A/m)
Side 1
0.0268
0.0282
0.0253
0.815
Side 2
0.0302
0.0296
0.0248
0.815
Side 3
0.0281
0.0292
0.0255
0.815
Side 4
0.0275
0.0286
0.0242
0.815
Top
0.0411
0.0404
0.0387
0.815
(cm)
126.2 kHz
Probe Measure Result(A/m)
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction
issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s
instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction
documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this
document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s)
are retained for 90 days only
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180900829902
Page:
10 of 10
Photographs
Please refer RF Setup Photos.
- End of the Report -
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic
format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction
issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s
instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction
documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this
document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s)
are retained for 90 days only
Download: MB-PWDIST MB-PWDIST RF Exposure Info SZEM180900829902-MPE TURISPORT SL
Mirror Download [FCC.gov]MB-PWDIST MB-PWDIST RF Exposure Info SZEM180900829902-MPE TURISPORT SL
Document ID4122054
Application IDngJaHGVHSU2DtHPC2AY/EQ==
Document DescriptionRF Exposure Info
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize11.37kB (142067 bits)
Date Submitted2018-12-28 00:00:00
Date Available2018-12-28 00:00:00
Creation Date2018-12-28 11:43:46
Producing SoftwareGPL Ghostscript 8.64
Document Lastmod2018-12-28 03:43:50
Document TitleSZEM180900829902-MPE
Document CreatorPScript5.dll Version 5.2.2
Document Author: peter_geng

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Page Count                      : 10
Create Date                     : 2018:12:28 11:43:46+08:00
Title                           : Microsoft Word - SZEM180900829902-MPE.doc
Producer                        : GPL Ghostscript 8.64
Author                          : peter_geng
Creator                         : PScript5.dll Version 5.2.2
Modify Date                     : 2018:12:28 03:43:50Z