FCC ID 2APWA-ZIP45GW

Gigabit SIP IP Phone

by Zultys, Inc.

Grantee Code: 2APWA   Product Code: ZIP45GW
Latest application date: 2019-09-24

FCC ID Device Details

FCC ID2APWA-ZIP45GW
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2APWA
Product CodeZIP45GW
Applicant BusinessZultys, Inc. 🇺🇸
Related Domains zultys.com
Equipment ClassGigabit SIP IP Phone
Test FirmBureau Veritas Shenzhen Co., Ltd. Dongguan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2019-09-24
5180-5240 MHzOriginal Equipment2019-09-24
2402-2480 MHzOriginal Equipment2019-09-24

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2019-09-24PDF 1.2 MB
Internal photosInternal Photos2019-09-24PDF 1.6 MB
External photoExternal Photos2019-09-24PDF 528.2 KB
External photosExternal Photos2019-09-24PDF 528.2 KB
Label and locationID Label/Location Info2019-09-24PDF 4.2 MB
RF Test set-up photoTest Setup Photos2019-09-24PDF 420.7 KB
DFS Test ReportTest Report2019-09-24PDF 461.6 KB
RF Test ReportTest Report2019-09-24PDF 3.5 MB
RF Test ReportTest Report2019-09-24PDF 1.9 MB
RF Test Report-BLETest Report2019-09-24PDF 1.1 MB
RF Test Report-WIFITest Report2019-09-24PDF 2.2 MB
Authorization LetterCover Letter(s)2019-09-24PDF 78 KB
LTC LetterCover Letter(s)2019-09-24PDF 80 KB
POACover Letter(s)2019-09-24PDF 347.1 KB
WIFI Channel 12&13 Description letterCover Letter(s)2019-09-24PDF 361.9 KB
RF Exposure reportRF Exposure Info2019-09-24PDF 347.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 214 KB
Schematics Metadata onlySchematicsPDF 1.5 MB
Operational Description Metadata onlyOperational DescriptionPDF 430.9 KB
SW Description Letter Metadata onlyOperational DescriptionPDF 147.2 KB

Application Information

Application IDmBorfJeLxW1on2H6Nd5SUw==
Final Action Date2019-09-24
Application PurposeOriginal Equipment
Applicant FRN0023737869
ModelZIP45GW
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionGigabit SIP IP Phone
Responsible PartyMichael Troflianin, VP, michael.troflianin@zultys.com , 4083280450
Test FirmEdwin Ye, Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch, edwin.ye@bureauveritas.com , 86-20-8714 8549
TCB Emailtcb@siemic.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
mBorfJeLxW1on2H6Nd5SUw==2019-09-24Original Equipment
SF0Vxi6sacL4T66EFm2tTw==2019-09-24Original Equipment
IZVUHPbyqCmWe79iUTlaJQ==2019-09-24Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.00609515CCC
2402-2480 MHz0.003055015CCC
2412-2462 MHz0.14060515CCC
5180-5240 MHz0.01213415ECC
5260-5320 MHz0.02618215ECC, ND
5500-5700 MHz0.01445415ECC, ND
5745-5825 MHz0.00635315ECC

Grants

TCB Grant - Application SF0Vxi6sacL4T66EFm2tTw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 09/24/2019

Application Dated: 09/24/2019
Zultys, Inc.
785 Lucerne Drive
Sunnyvale, CA 94085
 
Attention: Michael Troflianin , VP

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APWA-ZIP45GW
Name of Grantee:  Zultys, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Gigabit SIP IP Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.012134  
CC ND 15E 5260.0  -  5320.0 0.026182  
CC ND 15E 5500.0  -  5700.0 0.014454  
CC 15E 5745.0  -  5825.0 0.006353  

The device has 20MHz/40MHz/80MHz bandwidth. Output Power listed is maximum conducted output power(1*1 SISO).The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application SF0Vxi6sacL4T66EFm2tTw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zultys, Inc.
785 Lucerne Drive
Sunnyvale, CA 94085
United States
  Date of Grant: 09/24/2019

Application Dated: 09/24/2019
 
Attention: Michael Troflianin , VP

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APWA-ZIP45GW
Name of Grantee:  Zultys, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Gigabit SIP IP Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.012134  
CC ND 15E 5260.0  -  5320.0 0.026182  
CC ND 15E 5500.0  -  5700.0 0.014454  
CC 15E 5745.0  -  5825.0 0.006353  

The device has 20MHz/40MHz/80MHz bandwidth. Output Power listed is maximum conducted output power(1*1 SISO).The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application mBorfJeLxW1on2H6Nd5SUw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 09/24/2019

Application Dated: 09/24/2019
Zultys, Inc.
785 Lucerne Drive
Sunnyvale, CA 94085
 
Attention: Michael Troflianin , VP

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APWA-ZIP45GW
Name of Grantee:  Zultys, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Gigabit SIP IP Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003055  

Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application mBorfJeLxW1on2H6Nd5SUw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zultys, Inc.
785 Lucerne Drive
Sunnyvale, CA 94085
United States
  Date of Grant: 09/24/2019

Application Dated: 09/24/2019
 
Attention: Michael Troflianin , VP

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APWA-ZIP45GW
Name of Grantee:  Zultys, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Gigabit SIP IP Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.003055  

Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application IZVUHPbyqCmWe79iUTlaJQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 09/24/2019

Application Dated: 09/24/2019
Zultys, Inc.
785 Lucerne Drive
Sunnyvale, CA 94085
 
Attention: Michael Troflianin , VP

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APWA-ZIP45GW
Name of Grantee:  Zultys, Inc.
Equipment Class: Digital Transmission System
Notes: Gigabit SIP IP Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.006095  
CC 15C 2412.0  -  2462.0 0.140605  

The device has 20MHz/40MHz bandwidth. Output Power listed is maximum conducted output power(1*1 SISO).The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application IZVUHPbyqCmWe79iUTlaJQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zultys, Inc.
785 Lucerne Drive
Sunnyvale, CA 94085
United States
  Date of Grant: 09/24/2019

Application Dated: 09/24/2019
 
Attention: Michael Troflianin , VP

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2APWA-ZIP45GW
Name of Grantee:  Zultys, Inc.
Equipment Class: Digital Transmission System
Notes: Gigabit SIP IP Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.006095  
CC 15C 2412.0  -  2462.0 0.140605  

The device has 20MHz/40MHz bandwidth. Output Power listed is maximum conducted output power(1*1 SISO).The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: