FCC ID 2AQ2Q-MUR1DXUFL
Spread Spectrum Transmitter Module
by Cargt Inc.
Grantee Code: 2AQ2Q Product Code: MUR1DXUFL
Latest application date: 2019-02-07
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-02-07 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-02-07 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLB1DX Grant Date: 04/27/2016 | 2018-09-18 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLB1DX Grant Date: 04/27/2016 | 2018-09-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2019-02-07 | PDF 684.3 KB |
| External Photos | External Photos | 2018-09-18 | PDF 178.9 KB |
| Label Sample | ID Label/Location Info | 2018-09-18 | PDF 89.5 KB |
| Test Setup Photos | Test Setup Photos | 2019-02-07 | PDF 236.6 KB |
| DSS Test Report | Test Report | 2019-02-07 | PDF 518.3 KB |
| DTS Test Report | Test Report | 2019-02-07 | PDF 518.6 KB |
| Agent Authorization Letter | Cover Letter(s) | 2019-02-07 | PDF 269.1 KB |
| C2PC Submittal Letter | Cover Letter(s) | 2019-02-07 | PDF 27.1 KB |
| Agent Authorization | Cover Letter(s) | 2018-09-18 | PDF 269.1 KB |
| Authorization Letter for Change in ID | Cover Letter(s) | 2018-09-18 | PDF 285 KB |
Application Information
| Application ID | moTcipPTH/fNRZIHfY8l4g== |
|---|---|
| Final Action Date | 2019-02-07 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0027800291 |
| Model | MUR1DXUFL |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Spread Spectrum Transmitter Module |
| Responsible Party | Mark Vogt, Software Engineer, mark.vogt@cargt.com  , 9132204219 |
| Test Firm | Scot Rogers, Rogers Labs, Inc., rogers@pixius.net  , 913-837-3214 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Use in portable RF exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC: This Class II Permissive Change is to add a Flat Patch style 4dBi gain antenna; manufacturer: Togals Antenna Solutions, model: FXP72.07.0053A |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| moTcipPTH/fNRZIHfY8l4g== | 2019-02-07 | Class II permissive change or modification of presently authorized equipment |
| 49VgNgeIVWiPZE3+zZDYdw== | 2019-02-07 | Class II permissive change or modification of presently authorized equipment |
| icEypWJKCPTHzj2TyFxoQA== | 2018-09-18 | Change in identification of presently authorized equipment. Original FCC ID: VPYLB1DX Grant Date: 04/27/2016 |
| FYPW55xSiINj8UK+CVYaTg== | 2018-09-18 | Change in identification of presently authorized equipment. Original FCC ID: VPYLB1DX Grant Date: 04/27/2016 |
Equipment Authorization
Grants
TCB Grant - Application moTcipPTH/fNRZIHfY8l4g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/07/2019 Application Dated: 02/07/2019 |
| Cargt Inc. |
| 9753 Widmer Road |
| Lenexa, KS 66215 |
| Attention: Mark Vogt , Software Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ2Q-MUR1DXUFL |
| Name of Grantee: | Cargt Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Spread Spectrum Transmitter Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Use in portable RF exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC: This Class II Permissive Change is to add a Flat Patch style 4dBi gain antenna; manufacturer: Togals Antenna Solutions, model: FXP72.07.0053A |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application moTcipPTH/fNRZIHfY8l4g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cargt Inc. 9753 Widmer Road Lenexa, KS 66215 United States |
Date of Grant: 02/07/2019 Application Dated: 02/07/2019 |
| Attention: Mark Vogt , Software Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ2Q-MUR1DXUFL |
| Name of Grantee: | Cargt Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Spread Spectrum Transmitter Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Use in portable RF exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC: This Class II Permissive Change is to add a Flat Patch style 4dBi gain antenna; manufacturer: Togals Antenna Solutions, model: FXP72.07.0053A |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/18/2018 Application Dated: 09/18/2018 |
| Cargt Inc. |
| 9753 Widmer Road |
| Lenexa, KS 66215 |
| Attention: Mark Vogt , Software Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ2Q-MUR1DXUFL |
| Name of Grantee: | Cargt Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Spread Spectrum Transmitter Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Use in portable RF exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application icEypWJKCPTHzj2TyFxoQA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cargt Inc. 9753 Widmer Road Lenexa, KS 66215 United States |
Date of Grant: 09/18/2018 Application Dated: 09/18/2018 |
| Attention: Mark Vogt , Software Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ2Q-MUR1DXUFL |
| Name of Grantee: | Cargt Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Spread Spectrum Transmitter Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Use in portable RF exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/18/2018 Application Dated: 09/18/2018 |
| Cargt Inc. |
| 9753 Widmer Road |
| Lenexa, KS 66215 |
| Attention: Mark Vogt , Software Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ2Q-MUR1DXUFL |
| Name of Grantee: | Cargt Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital transmission System Communications Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.174 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Use in portable RF exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application FYPW55xSiINj8UK+CVYaTg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cargt Inc. 9753 Widmer Road Lenexa, KS 66215 United States |
Date of Grant: 09/18/2018 Application Dated: 09/18/2018 |
| Attention: Mark Vogt , Software Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ2Q-MUR1DXUFL |
| Name of Grantee: | Cargt Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital transmission System Communications Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.174 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Use in portable RF exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/07/2019 Application Dated: 02/07/2019 |
| Cargt Inc. |
| 9753 Widmer Road |
| Lenexa, KS 66215 |
| Attention: Mark Vogt , Software Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ2Q-MUR1DXUFL |
| Name of Grantee: | Cargt Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital transmission System Communications Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.174 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Use in portable RF exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC: This Class II Permissive Change is to add a Flat Patch style 4dBi gain antenna; manufacturer: Togals Antenna Solutions, model: FXP72.07.0053A |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 49VgNgeIVWiPZE3+zZDYdw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cargt Inc. 9753 Widmer Road Lenexa, KS 66215 United States |
Date of Grant: 02/07/2019 Application Dated: 02/07/2019 |
| Attention: Mark Vogt , Software Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ2Q-MUR1DXUFL |
| Name of Grantee: | Cargt Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital transmission System Communications Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.174 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Use in portable RF exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC: This Class II Permissive Change is to add a Flat Patch style 4dBi gain antenna; manufacturer: Togals Antenna Solutions, model: FXP72.07.0053A |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |