FCC ID 2AQ2Q-MUR1LVUFL

FCC ID	2AQ2Q-MUR1LVUFL
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	2AQ2Q
Product Code	MUR1LVUFL
Applicant Business	Cargt Inc. 🇺🇸
Related Domains	cargt.com
Equipment Class	Communications Module
Test Firm	Rogers Labs, Inc.

Frequency Range	Application Purpose	Final Action Date
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2020-06-09
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2020-06-09
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2020-06-09
2402-2480 MHz	Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE59B1LV Grant Date: 04/16/2019	2020-05-20
2402-2480 MHz	Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE59B1LV Grant Date: 04/16/2019	2020-05-20
5180-5240 MHz	Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE59B1LV Grant Date: 04/16/2019	2020-05-20

Document	Type	Available	File
External Photos	External Photos	2020-06-09	PDF 1 MB
External Photos	External Photos	2020-05-20	PDF 592.9 KB
Label Info	ID Label/Location Info	2020-05-20	PDF 94.9 KB
Test Setup Photos	Test Setup Photos	2020-06-09	PDF 311.4 KB
Test Report DSS	Test Report	2020-06-09	PDF 578.1 KB
Test Report DTS	Test Report	2020-06-09	PDF 650.4 KB
Test Report NII	Test Report	2020-06-09	PDF 768.4 KB
C2PC Cover Letter	Cover Letter(s)	2020-06-09	PDF 27.6 KB
POA Letter	Cover Letter(s)	2020-06-09	PDF 282.3 KB
Change in ID Letter	Cover Letter(s)	2020-05-20	PDF 25.2 KB
POA for Murata	Cover Letter(s)	2020-05-20	PDF 146.3 KB
POA for Rogers	Cover Letter(s)	2020-05-20	PDF 269.1 KB
Submittal Letter	Cover Letter(s)	2020-05-20	PDF 27.3 KB

Application ID	liT2G/PHlZtrsNLEX57P7w==
Final Action Date	2020-06-09
Application Purpose	Class II permissive change or modification of presently authorized equipment
Applicant FRN	0027800291
Model	MUR1LVUFL
Frequency Range	5180-5240 MHz
Equipment Class	NII - Unlicensed National Information Infrastructure TX
Device Description	Communications Module
Responsible Party	Mark Vogt, Software Engineer, mark.vogt@cargt.com , 9132204219
Test Firm	Scot Rogers, Rogers Labs, Inc., rogers@pixius.net , 913-837-3214
TCB Email	TEI@TIMCOENGR.COM
TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term Confidentiality	No
Long-Term Confidentiality	No
Grant Deferral	No
Modular Equipment	Single Modular Approval
Composite Device	Yes
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and 2.4GHz WLAN 802.11 b/g/n transmitters. C2PC: This change request provides an additional antenna option for use with the module.

Application ID	Date	Purpose
liT2G/PHlZtrsNLEX57P7w==	2020-06-09	Class II permissive change or modification of presently authorized equipment
Y0YqVWmfUtpnlvET870Xbg==	2020-06-09	Class II permissive change or modification of presently authorized equipment
NYwUvvaLuuteBezUmMNyOw==	2020-06-09	Class II permissive change or modification of presently authorized equipment
vT3gejM9naqBDqnKUw9wBw==	2020-05-20	Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE59B1LV Grant Date: 04/16/2019
i8EQAtVxcQXGP4rIkshfmg==	2020-05-20	Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE59B1LV Grant Date: 04/16/2019
KOwd31Mp11RbBfDuRZSiDg==	2020-05-20	Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE59B1LV Grant Date: 04/16/2019

Frequency	Output	Rules	Grant Notes
2402-2480 MHz	0.0098000	15C	CC
2402-2480 MHz	0.0031	15C	CC
2412-2462 MHz	0.3784	15C	CC
5180-5240 MHz	0.0618	15E	CC
5180-5240 MHz	0.0618	15E	38, CC
5260-5320 MHz	0.0614	15E	CC
5260-5320 MHz	0.0614	15E	38, CC
5500-5720 MHz	0.0615	15E	CC
5500-5720 MHz	0.0615	15E	38, CC
5745-5825 MHz	0.0619	15E	CC
5745-5825 MHz	0.0619	15E	38, CC

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 06/09/2020

Application Dated: 06/09/2020

Cargt Inc.

9753 Widmer Road

Lenexa, KS 66215

Attention: Mark Vogt , Software Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AQ2Q-MUR1LVUFL

Name of Grantee:	Cargt Inc.

Equipment Class:	Digital Transmission System
Notes:	Communications Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0031
CC	15C	2412.0 - 2462.0	0.3784

Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and 5GHz WLAN 802.11a/n/ac transmitters. C2PC: This change request provides an additional antenna option for use with the module.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cargt Inc.
9753 Widmer Road
Lenexa, KS 66215
United States

Date of Grant: 06/09/2020

Application Dated: 06/09/2020

Attention: Mark Vogt , Software Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AQ2Q-MUR1LVUFL

Name of Grantee:	Cargt Inc.

Equipment Class:	Digital Transmission System
Notes:	Communications Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0031
CC	15C	2412.0 - 2462.0	0.3784

Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and 5GHz WLAN 802.11a/n/ac transmitters. C2PC: This change request provides an additional antenna option for use with the module.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application vT3gejM9naqBDqnKUw9wBw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 05/20/2020

Application Dated: 05/20/2020

Cargt Inc.

9753 Widmer Road

Lenexa, KS 66215

Attention: Mark Vogt , Software Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AQ2Q-MUR1LVUFL

Name of Grantee:	Cargt Inc.

Equipment Class:	Digital Transmission System
Notes:	Communications Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0031
CC	15C	2412.0 - 2462.0	0.3784

Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and 5GHz WLAN 802.11a/n/ac transmitters.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cargt Inc.
9753 Widmer Road
Lenexa, KS 66215
United States

Date of Grant: 05/20/2020

Application Dated: 05/20/2020

Attention: Mark Vogt , Software Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AQ2Q-MUR1LVUFL

Name of Grantee:	Cargt Inc.

Equipment Class:	Digital Transmission System
Notes:	Communications Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0031
CC	15C	2412.0 - 2462.0	0.3784

Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and 5GHz WLAN 802.11a/n/ac transmitters.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application NYwUvvaLuuteBezUmMNyOw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 06/09/2020

Application Dated: 06/09/2020

Cargt Inc.

9753 Widmer Road

Lenexa, KS 66215

Attention: Mark Vogt , Software Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AQ2Q-MUR1LVUFL

Name of Grantee:	Cargt Inc.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Communications Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0098

Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth Low Energy and WLAN 802.11a/b/g/n/ac transmitters. C2PC: This change request provides an additional antenna option for use with the module.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cargt Inc.
9753 Widmer Road
Lenexa, KS 66215
United States

Date of Grant: 06/09/2020

Application Dated: 06/09/2020

Attention: Mark Vogt , Software Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AQ2Q-MUR1LVUFL

Name of Grantee:	Cargt Inc.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Communications Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0098

Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth Low Energy and WLAN 802.11a/b/g/n/ac transmitters. C2PC: This change request provides an additional antenna option for use with the module.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application liT2G/PHlZtrsNLEX57P7w==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 06/09/2020

Application Dated: 06/09/2020

Cargt Inc.

9753 Widmer Road

Lenexa, KS 66215

Attention: Mark Vogt , Software Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AQ2Q-MUR1LVUFL

Name of Grantee:	Cargt Inc.

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Communications Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC	15E	5180.0 - 5240.0	0.0618
38 CC	15E	5260.0 - 5320.0	0.0614
38 CC	15E	5500.0 - 5720.0	0.0615
38 CC	15E	5745.0 - 5825.0	0.0619

Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and 2.4GHz WLAN 802.11 b/g/n transmitters. C2PC: This change request provides an additional antenna option for use with the module.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cargt Inc.
9753 Widmer Road
Lenexa, KS 66215
United States

Date of Grant: 06/09/2020

Application Dated: 06/09/2020

Attention: Mark Vogt , Software Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AQ2Q-MUR1LVUFL

Name of Grantee:	Cargt Inc.

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Communications Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC	15E	5180.0 - 5240.0	0.0618
38 CC	15E	5260.0 - 5320.0	0.0614
38 CC	15E	5500.0 - 5720.0	0.0615
38 CC	15E	5745.0 - 5825.0	0.0619

Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and 2.4GHz WLAN 802.11 b/g/n transmitters. C2PC: This change request provides an additional antenna option for use with the module.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application KOwd31Mp11RbBfDuRZSiDg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 05/20/2020

Application Dated: 05/20/2020

Cargt Inc.

9753 Widmer Road

Lenexa, KS 66215

Attention: Mark Vogt , Software Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AQ2Q-MUR1LVUFL

Name of Grantee:	Cargt Inc.

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Communications Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0 - 5240.0	0.0618
CC	15E	5260.0 - 5320.0	0.0614
CC	15E	5500.0 - 5720.0	0.0615
CC	15E	5745.0 - 5825.0	0.0619

Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and 2.4GHz WLAN 802.11 b/g/n transmitters.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cargt Inc.
9753 Widmer Road
Lenexa, KS 66215
United States

Date of Grant: 05/20/2020

Application Dated: 05/20/2020

Attention: Mark Vogt , Software Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AQ2Q-MUR1LVUFL

Name of Grantee:	Cargt Inc.

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Communications Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0 - 5240.0	0.0618
CC	15E	5260.0 - 5320.0	0.0614
CC	15E	5500.0 - 5720.0	0.0615
CC	15E	5745.0 - 5825.0	0.0619

Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and 2.4GHz WLAN 802.11 b/g/n transmitters.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application i8EQAtVxcQXGP4rIkshfmg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 05/20/2020

Application Dated: 05/20/2020

Cargt Inc.

9753 Widmer Road

Lenexa, KS 66215

Attention: Mark Vogt , Software Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AQ2Q-MUR1LVUFL

Name of Grantee:	Cargt Inc.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Communications Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0098

Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth Low Energy and WLAN 802.11a/b/g/n/ac transmitters.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cargt Inc.
9753 Widmer Road
Lenexa, KS 66215
United States

Date of Grant: 05/20/2020

Application Dated: 05/20/2020

Attention: Mark Vogt , Software Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AQ2Q-MUR1LVUFL

Name of Grantee:	Cargt Inc.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Communications Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0098

Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth Low Energy and WLAN 802.11a/b/g/n/ac transmitters.

CC:	This device is certified pursuant to two different Part 15 rules sections.

Mail To:

Communications Module

by Cargt Inc.

Grantee Code: 2AQ2Q Product Code: MUR1LVUFL

Latest application date: 2020-06-09

FCC ID Device Details

Operating Frequencies

Exhibits

Application Information

Applications

Equipment Authorization

Grants

TCB Grant - Application Y0YqVWmfUtpnlvET870Xbg==

EAS Grant - Application Y0YqVWmfUtpnlvET870Xbg==

TCB Grant - Application vT3gejM9naqBDqnKUw9wBw==

EAS Grant - Application vT3gejM9naqBDqnKUw9wBw==

TCB Grant - Application NYwUvvaLuuteBezUmMNyOw==

EAS Grant - Application NYwUvvaLuuteBezUmMNyOw==

TCB Grant - Application liT2G/PHlZtrsNLEX57P7w==

EAS Grant - Application liT2G/PHlZtrsNLEX57P7w==

TCB Grant - Application KOwd31Mp11RbBfDuRZSiDg==

EAS Grant - Application KOwd31Mp11RbBfDuRZSiDg==

TCB Grant - Application i8EQAtVxcQXGP4rIkshfmg==

EAS Grant - Application i8EQAtVxcQXGP4rIkshfmg==