FCC ID 2AQ68RLP0003
Wi-Fi 6E BT 5.2 M.2 2230 Module
by Hon Lin Technology Co., Ltd.
Grantee Code: 2AQ68 Product Code: RLP0003
Latest application date: 2022-07-20
FCC ID Device Details
| FCC ID | 2AQ68RLP0003 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AQ68 |
| Product Code | RLP0003 |
| Applicant Business | Hon Lin Technology Co., Ltd. 🇹🇼 |
| Related Domains |  foxconn.com |
| Equipment Class | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Test Firm | Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-07-20 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-07-20 |
| 5935-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2022-07-20 |
| 5180-5250 MHz | Class II permissive change or modification of presently authorized equipment | 2022-07-20 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNFA765 Grant Date: 06/07/2021 | 2022-05-24 |
| 5935-6415 MHz | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNFA765 Grant Date: 06/07/2021 | 2022-05-24 |
| 5180-5250 MHz | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNFA765 Grant Date: 06/07/2021 | 2022-05-24 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNFA765 Grant Date: 06/07/2021 | 2022-05-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual rev 2 | Users Manual | 2022-07-20 | PDF 1.1 MB |
| Users Manual rev | Users Manual | 2022-05-24 | PDF 1.2 MB |
| External Photos | External Photos | 2022-05-24 | PDF 853.7 KB |
| Label Sample & Label Location rev | ID Label/Location Info | 2022-05-24 | PDF 1.9 MB |
| Test Set Up Photos rev 2 | Test Setup Photos | 2022-07-20 | PDF 2.9 MB |
| Antenna Specification rev 2 | Test Report | 2022-07-20 | PDF 2.3 MB |
| Test Report (6CD) rev 4 | Test Report | 2022-07-20 | PDF 1.9 MB |
| Test Report (DSS) rev 2 | Test Report | 2022-07-20 | PDF 1.5 MB |
| Test Report (DTS-BT LE) rev 2 | Test Report | 2022-07-20 | PDF 1.4 MB |
| Test Report (DTS-WLAN) rev 2 | Test Report | 2022-07-20 | PDF 2.8 MB |
| Test Report (NII) rev 2 | Test Report | 2022-07-20 | PDF 3.3 MB |
| Cover Letter (Agent Authorization) | Cover Letter(s) | 2022-07-20 | PDF 481 KB |
| Cover Letter (Description of Change) rev 2 | Cover Letter(s) | 2022-07-20 | PDF 81.7 KB |
| Confidentiality Request (Long term) | Cover Letter(s) | 2022-05-24 | PDF 306.2 KB |
| Cover Letter (Change ID Authorization) | Cover Letter(s) | 2022-05-24 | PDF 50.7 KB |
| Cover Letter (Contact Authorization-Qualcomm) | Cover Letter(s) | 2022-05-24 | PDF 65.5 KB |
| Cover Letter (Request for Change ID) | Cover Letter(s) | 2022-05-24 | PDF 313.8 KB |
| RF Exposure Info (MPE) rev Metadata only | RF Exposure Info | 2022-07-20 | PDF 219 KB |
| RF Exposure Info (MPE) rev 2 | RF Exposure Info | 2022-07-20 | PDF 223.2 KB |
| Software Operational Description Metadata only | SDR Software/Security Inf | PDF 346.1 KB | |
| Software Operational Description Metadata only | Operational Description | PDF 346.1 KB | |
| Software Defined Radio rev Metadata only | SDR Software/Security Inf | PDF 825.4 KB |
Application Information
| Application ID | ofsd8iiX6BX/W7/30j83iQ== |
|---|---|
| Final Action Date | 2022-07-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0027834597 |
| Model | RLP0003 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Responsible Party | Nancy Lin, Associate Manager, nancy.lin@foxconn.com , + 886 2 2267 6511 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com  , +886-(0)3-260-0884 |
| TCB Email | certification@bureauveritas.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | CIIPC for adding additional antenna described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ofsd8iiX6BX/W7/30j83iQ== | 2022-07-20 | Class II permissive change or modification of presently authorized equipment |
| Mzb4GKYOzNHquAnUVvFtqA== | 2022-07-20 | Class II permissive change or modification of presently authorized equipment |
| Au7Apj4XLiciJ7zH3oKDFA== | 2022-07-20 | Class II permissive change or modification of presently authorized equipment |
| 9MJUo6iIlzfAfcG4JcQzHg== | 2022-07-20 | Class II permissive change or modification of presently authorized equipment |
| siS3WhqblguNUdW8oa7FWQ== | 2022-05-24 | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNFA765 Grant Date: 06/07/2021 |
| kSVN3boMQpxmsIhSzHDsxQ== | 2022-05-24 | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNFA765 Grant Date: 06/07/2021 |
| iUARdheCR7SO+PCHcqckmg== | 2022-05-24 | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNFA765 Grant Date: 06/07/2021 |
| ZQefcN5XJ84DDIfHp5oxaQ== | 2022-05-24 | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNFA765 Grant Date: 06/07/2021 |
| LrbtWrgQ+bdu/bpf5W3VKA== | 2022-05-24 | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNFA765 Grant Date: 06/07/2021 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 15B | CC | ||
| 2402-2480 MHz | 0.0290000 | 15C | CC |
| 2402-2480 MHz | 0.011 | 15C | CC |
| 2412-2472 MHz | 0.756 | 15C | CC, MO |
| 5180-5250 MHz | 0.154 | 15E | CC, MO |
| 5250-5320 MHz | 0.154 | 15E | CC, MO, ND |
| 5500-5720 MHz | 0.152 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.152 | 15E | CC, MO |
| 5815 MHz | 0.303 | 15E | CC, EP, MO |
| 5835 MHz | 0.439 | 15E | CC, EP, MO |
| 5845 MHz | 0.362 | 15E | CC, EP, MO |
| 5855 MHz | 0.392 | 15E | CC, EP, MO |
| 5865-5885 MHz | 0.442 | 15E | CC, EP, MO |
| 5935-6415 MHz | 0.993 | 15E | CC, EP, MO |
| 5935-7115 MHz | 0.156 | 15E | CC, EP, MO |
| 6535-6855 MHz | 0.993 | 15E | CC, EP, MO |
Grants
TCB Grant - Application ZQefcN5XJ84DDIfHp5oxaQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 05/24/2022 Application Dated: 05/17/2022 |
| Hon Lin Technology Co., Ltd. |
| 11F, No.32, Jihu Rd., Neihu Dist., |
| Taipei City, 114 Taiwan |
| Attention: Nancy Lin , Associate Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ68RLP0003 |
| Name of Grantee: | Hon Lin Technology Co., Ltd. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ZQefcN5XJ84DDIfHp5oxaQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hon Lin Technology Co., Ltd. 11F, No.32, Jihu Rd., Neihu Dist., Taipei City, 114 Taiwan |
Date of Grant: 05/24/2022 Application Dated: 05/17/2022 |
| Attention: Nancy Lin , Associate Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ68RLP0003 |
| Name of Grantee: | Hon Lin Technology Co., Ltd. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 05/24/2022 Application Dated: 05/17/2022 |
| Hon Lin Technology Co., Ltd. |
| 11F, No.32, Jihu Rd., Neihu Dist., |
| Taipei City, 114 Taiwan |
| Attention: Nancy Lin , Associate Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ68RLP0003 |
| Name of Grantee: | Hon Lin Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2472.0 | 0.756 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.011 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application siS3WhqblguNUdW8oa7FWQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hon Lin Technology Co., Ltd. 11F, No.32, Jihu Rd., Neihu Dist., Taipei City, 114 Taiwan |
Date of Grant: 05/24/2022 Application Dated: 05/17/2022 |
| Attention: Nancy Lin , Associate Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ68RLP0003 |
| Name of Grantee: | Hon Lin Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2472.0 | 0.756 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.011 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 07/20/2022 Application Dated: 07/04/2022 |
| Hon Lin Technology Co., Ltd. |
| 11F, No.32, Jihu Rd., Neihu Dist., |
| Taipei City, 114 Taiwan |
| Attention: Nancy Lin , Associate Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ68RLP0003 |
| Name of Grantee: | Hon Lin Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.011 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.756 |
| CIIPC for adding additional antenna described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application ofsd8iiX6BX/W7/30j83iQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hon Lin Technology Co., Ltd. 11F, No.32, Jihu Rd., Neihu Dist., Taipei City, 114 Taiwan |
Date of Grant: 07/20/2022 Application Dated: 07/04/2022 |
| Attention: Nancy Lin , Associate Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ68RLP0003 |
| Name of Grantee: | Hon Lin Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.011 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.756 |
| CIIPC for adding additional antenna described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 07/20/2022 Application Dated: 07/04/2022 |
| Hon Lin Technology Co., Ltd. |
| 11F, No.32, Jihu Rd., Neihu Dist., |
| Taipei City, 114 Taiwan |
| Attention: Nancy Lin , Associate Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ68RLP0003 |
| Name of Grantee: | Hon Lin Technology Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.029 |
| CIIPC for adding additional antenna described in the filing. Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Mzb4GKYOzNHquAnUVvFtqA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hon Lin Technology Co., Ltd. 11F, No.32, Jihu Rd., Neihu Dist., Taipei City, 114 Taiwan |
Date of Grant: 07/20/2022 Application Dated: 07/04/2022 |
| Attention: Nancy Lin , Associate Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ68RLP0003 |
| Name of Grantee: | Hon Lin Technology Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.029 |
| CIIPC for adding additional antenna described in the filing. Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 05/24/2022 Application Dated: 05/17/2022 |
| Hon Lin Technology Co., Ltd. |
| 11F, No.32, Jihu Rd., Neihu Dist., |
| Taipei City, 114 Taiwan |
| Attention: Nancy Lin , Associate Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ68RLP0003 |
| Name of Grantee: | Hon Lin Technology Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.029 |
| Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application LrbtWrgQ+bdu/bpf5W3VKA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hon Lin Technology Co., Ltd. 11F, No.32, Jihu Rd., Neihu Dist., Taipei City, 114 Taiwan |
Date of Grant: 05/24/2022 Application Dated: 05/17/2022 |
| Attention: Nancy Lin , Associate Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ68RLP0003 |
| Name of Grantee: | Hon Lin Technology Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.029 |
| Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 05/24/2022 Application Dated: 05/17/2022 |
| Hon Lin Technology Co., Ltd. |
| 11F, No.32, Jihu Rd., Neihu Dist., |
| Taipei City, 114 Taiwan |
| Attention: Nancy Lin , Associate Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ68RLP0003 |
| Name of Grantee: | Hon Lin Technology Co., Ltd. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.993 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.993 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.156 |
| Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. For 5.925-7.125GHz band operation, only the PIFA antenna (Model: 260-25083 with maximum 5.16 dBi gain in 6 GHz band) and Monopole antenna (Model: 260-25084 with maximum 4.81 dBi gain in 6 GHz band) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application kSVN3boMQpxmsIhSzHDsxQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hon Lin Technology Co., Ltd. 11F, No.32, Jihu Rd., Neihu Dist., Taipei City, 114 Taiwan |
Date of Grant: 05/24/2022 Application Dated: 05/17/2022 |
| Attention: Nancy Lin , Associate Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ68RLP0003 |
| Name of Grantee: | Hon Lin Technology Co., Ltd. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.993 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.993 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.156 |
| Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. For 5.925-7.125GHz band operation, only the PIFA antenna (Model: 260-25083 with maximum 5.16 dBi gain in 6 GHz band) and Monopole antenna (Model: 260-25084 with maximum 4.81 dBi gain in 6 GHz band) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 05/24/2022 Application Dated: 05/17/2022 |
| Hon Lin Technology Co., Ltd. |
| 11F, No.32, Jihu Rd., Neihu Dist., |
| Taipei City, 114 Taiwan |
| Attention: Nancy Lin , Associate Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ68RLP0003 |
| Name of Grantee: | Hon Lin Technology Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.154 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.154 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.152 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.152 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.442 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.362 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.439 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.392 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.303 |
| Class II Permissive Change to adding U-NII-4 and U-NII -3 & -4 span channels through software enable. Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP . Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application iUARdheCR7SO+PCHcqckmg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hon Lin Technology Co., Ltd. 11F, No.32, Jihu Rd., Neihu Dist., Taipei City, 114 Taiwan |
Date of Grant: 05/24/2022 Application Dated: 05/17/2022 |
| Attention: Nancy Lin , Associate Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ68RLP0003 |
| Name of Grantee: | Hon Lin Technology Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.154 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.154 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.152 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.152 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.442 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.362 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.439 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.392 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.303 |
| Class II Permissive Change to adding U-NII-4 and U-NII -3 & -4 span channels through software enable. Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP . Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 07/20/2022 Application Dated: 07/04/2022 |
| Hon Lin Technology Co., Ltd. |
| 11F, No.32, Jihu Rd., Neihu Dist., |
| Taipei City, 114 Taiwan |
| Attention: Nancy Lin , Associate Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ68RLP0003 |
| Name of Grantee: | Hon Lin Technology Co., Ltd. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.993 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.993 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.156 |
| CIIPC for adding additional antenna described in the filing. Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. For 5.925-7.125GHz band operation, only the PIFA antenna (Model: 260-25083 with maximum 5.16 dBi gain in 6 GHz band) and Monopole antenna (Model: 260-25084 with maximum 4.81 dBi gain in 6 GHz band) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Au7Apj4XLiciJ7zH3oKDFA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hon Lin Technology Co., Ltd. 11F, No.32, Jihu Rd., Neihu Dist., Taipei City, 114 Taiwan |
Date of Grant: 07/20/2022 Application Dated: 07/04/2022 |
| Attention: Nancy Lin , Associate Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ68RLP0003 |
| Name of Grantee: | Hon Lin Technology Co., Ltd. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.993 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.993 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.156 |
| CIIPC for adding additional antenna described in the filing. Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. For 5.925-7.125GHz band operation, only the PIFA antenna (Model: 260-25083 with maximum 5.16 dBi gain in 6 GHz band) and Monopole antenna (Model: 260-25084 with maximum 4.81 dBi gain in 6 GHz band) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 07/20/2022 Application Dated: 07/04/2022 |
| Hon Lin Technology Co., Ltd. |
| 11F, No.32, Jihu Rd., Neihu Dist., |
| Taipei City, 114 Taiwan |
| Attention: Nancy Lin , Associate Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ68RLP0003 |
| Name of Grantee: | Hon Lin Technology Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.154 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.154 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.152 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.152 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.442 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.362 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.439 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.392 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.303 |
| CIIPC for adding additional antenna described in the filing. Class II Permissive Change to adding U-NII-4 and U-NII -3 & -4 span channels through software enable. Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 9MJUo6iIlzfAfcG4JcQzHg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hon Lin Technology Co., Ltd. 11F, No.32, Jihu Rd., Neihu Dist., Taipei City, 114 Taiwan |
Date of Grant: 07/20/2022 Application Dated: 07/04/2022 |
| Attention: Nancy Lin , Associate Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ68RLP0003 |
| Name of Grantee: | Hon Lin Technology Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.154 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.154 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.152 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.152 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.442 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.362 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.439 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.392 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.303 |
| CIIPC for adding additional antenna described in the filing. Class II Permissive Change to adding U-NII-4 and U-NII -3 & -4 span channels through software enable. Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |