FCC ID 2AQ7Q-DB0355

DTEN Board D7

by DTEN Inc.

Grantee Code: 2AQ7Q   Product Code: DB0355
Latest application date: 2018-11-28

FCC ID Device Details

FCC ID2AQ7Q-DB0355
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AQ7Q
Product CodeDB0355
Applicant BusinessDTEN Inc. 🇺🇸
Related Domains cn.dten.com
Equipment ClassDTEN Board D7
Test FirmWALTEK TESTING GROUP CO., LTD.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2018-11-28
2402-2480 MHzOriginal Equipment2018-11-28
2402-2480 MHzOriginal Equipment2018-11-28

Exhibits

DocumentTypeAvailableFile
user manualUsers Manual2018-11-28PDF 3.7 MB
Internal PhotosInternal Photos2018-11-28PDF 2 MB
external photosExternal Photos2018-11-28PDF 2.9 MB
labelID Label/Location Info2018-11-28PDF 137.3 KB
Test Setup PhotosTest Setup Photos2018-11-28PDF 990.6 KB
Test ReportTest Report2018-11-28PDF 5.2 MB
test reportTest Report2018-11-28PDF 3 MB
test reportTest Report2018-11-28PDF 2.3 MB
test reportTest Report2018-11-28PDF 4.9 MB
Security statementCover Letter(s)2018-11-28PDF 69.7 KB
confidentiality request letterCover Letter(s)2018-11-28PDF 108.9 KB
poaCover Letter(s)2018-11-28PDF 12.8 KB
security statementCover Letter(s)2018-11-28PDF 69.7 KB
RF exposureRF Exposure Info2018-11-28PDF 232.2 KB
block diagram Metadata onlyBlock DiagramPDF 61.5 KB
schematics Metadata onlySchematicsPDF 5.6 MB
operation description Metadata onlyOperational DescriptionPDF 268.9 KB

Application Information

Application IDm2ixsx3YnV5Vwy0LtIQgnA==
Final Action Date2018-11-28
Application PurposeOriginal Equipment
Applicant FRN0027834530
ModelDB0355
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionDTEN Board D7
Responsible PartyNa Ma, Manager, nma@cn.dten.com , 86-571-87039697
Test FirmPhilo Zhong, WALTEK TESTING GROUP CO., LTD., Philo@waltek.com.cn , +86-755-8355 1033802
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.

Applications

Application IDDatePurpose
m2ixsx3YnV5Vwy0LtIQgnA==2018-11-28Original Equipment
7b/+g6mcMzgho5O1Hu9q1Q==2018-11-28Original Equipment
3Bt86069YMmB19f96HHDXQ==2018-11-28Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.0001615CCC, MO
2402-2480 MHz0.001150015CCC
2412-2462 MHz0.0489815CCC, MO
5180-5240 MHz0.0935415ECC, MO
5745-5825 MHz0.0721115ECC, MO

Grants

TCB Grant - Application m2ixsx3YnV5Vwy0LtIQgnA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/28/2018

Application Dated: 11/28/2018
DTEN Inc.
97 E. Brokaw Road
Suite 180
San Jose, CA 95112
 
Attention: Na Ma , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQ7Q-DB0355
Name of Grantee:  DTEN Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: DTEN Board D7
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.09354  
CC MO 15E 5745.0  -  5825.0 0.07211  

Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application m2ixsx3YnV5Vwy0LtIQgnA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

DTEN Inc.
97 E. Brokaw Road Suite 180
San Jose, CA 95112
United States
  Date of Grant: 11/28/2018

Application Dated: 11/28/2018
 
Attention: Na Ma , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQ7Q-DB0355
Name of Grantee:  DTEN Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: DTEN Board D7
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.09354  
CC MO 15E 5745.0  -  5825.0 0.07211  

Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 7b/+g6mcMzgho5O1Hu9q1Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/28/2018

Application Dated: 11/28/2018
DTEN Inc.
97 E. Brokaw Road
Suite 180
San Jose, CA 95112
 
Attention: Na Ma , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQ7Q-DB0355
Name of Grantee:  DTEN Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: DTEN Board D7
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00115  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 7b/+g6mcMzgho5O1Hu9q1Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

DTEN Inc.
97 E. Brokaw Road Suite 180
San Jose, CA 95112
United States
  Date of Grant: 11/28/2018

Application Dated: 11/28/2018
 
Attention: Na Ma , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQ7Q-DB0355
Name of Grantee:  DTEN Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: DTEN Board D7
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00115  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 3Bt86069YMmB19f96HHDXQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/28/2018

Application Dated: 11/28/2018
DTEN Inc.
97 E. Brokaw Road
Suite 180
San Jose, CA 95112
 
Attention: Na Ma , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQ7Q-DB0355
Name of Grantee:  DTEN Inc.
Equipment Class: Digital Transmission System
Notes: DTEN Board D7
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2402.0  -  2480.0 0.00016  
CC MO 15C 2412.0  -  2462.0 0.04898  

Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 3Bt86069YMmB19f96HHDXQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

DTEN Inc.
97 E. Brokaw Road Suite 180
San Jose, CA 95112
United States
  Date of Grant: 11/28/2018

Application Dated: 11/28/2018
 
Attention: Na Ma , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQ7Q-DB0355
Name of Grantee:  DTEN Inc.
Equipment Class: Digital Transmission System
Notes: DTEN Board D7
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2402.0  -  2480.0 0.00016  
CC MO 15C 2412.0  -  2462.0 0.04898  

Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: