FCC ID 2AQ9M-SIM7100E
RFID module
by Beijing Silion Technology Corp.,LTD.
Grantee Code: 2AQ9M Product Code: SIM7100E
Latest application date: 2024-04-15
FCC ID Device Details
| FCC ID | 2AQ9M-SIM7100E |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AQ9M |
| Product Code | SIM7100E |
| Applicant Business | Beijing Silion Technology Corp.,LTD. 🇨🇳 |
| Related Domains |  silion.com.cn |
| Equipment Class | RFID module |
| Test Firm | Shenzhen Anbotek Compliance Laboratory Limited |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.75-927.25 MHz | Class II permissive change or modification of presently authorized equipment | 2024-04-15 |
| 902.75-927.25 MHz | Original Equipment | 2022-12-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2023-05-31 | PDF 380.8 KB |
| Internal Photos | Internal Photos | 2024-10-08 | PDF 2.6 MB |
| Internal photos | Internal Photos | 2023-05-31 | PDF 5.6 MB |
| External Photos | External Photos | 2024-10-08 | PDF 5.6 MB |
| External photos | External Photos | 2023-05-31 | PDF 5.7 MB |
| Label | ID Label/Location Info | 2022-12-02 | PDF 1.1 MB |
| Test Setup Photos | Test Setup Photos | 2024-10-08 | PDF 2.3 MB |
| Test Setup Photos | Test Setup Photos | 2023-05-31 | PDF 2.4 MB |
| Test report | Test Report | 2024-04-15 | PDF 1.1 MB |
| antenna Specifications | Test Report | 2024-04-15 | PDF 508.3 KB |
| test report | Test Report | 2024-04-15 | PDF 1.1 MB |
| test report | Test Report | 2022-12-02 | PDF 3.4 MB |
| CertificationEquipmentType | Attestation Statements | 2024-04-15 | PDF 94.3 KB |
| CertificiationApplicant | Attestation Statements | 2024-04-15 | PDF 86 KB |
| Agent Authorization | Cover Letter(s) | 2024-04-15 | PDF 60.5 KB |
| Declaration on Model Differences SHEA1657 486 9446831 | Cover Letter(s) | 2024-04-15 | PDF 60.5 KB |
| FCC Class II PC request letter | Cover Letter(s) | 2024-04-15 | PDF 296.4 KB |
| FCC Short & Long Term Confidentiality Request | Cover Letter(s) | 2024-04-15 | PDF 62 KB |
| FCC Declaration on Model Differences | Cover Letter(s) | 2022-12-02 | PDF 61.4 KB |
| FCC Long Term Only Confidentiality Request | Cover Letter(s) | 2022-12-02 | PDF 62 KB |
| Letter of Authorization Rev 2.0 | Cover Letter(s) | 2022-12-02 | PDF 60.3 KB |
| ModularApprovalRequest singlemodule | Cover Letter(s) | 2022-12-02 | PDF 74 KB |
| MPE | RF Exposure Info | 2024-04-15 | PDF 138.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 100.5 KB | |
| SCH Metadata only | Schematics | PDF 182.5 KB | |
| OP Metadata only | Operational Description | PDF 65.3 KB |
Application Information
| Application ID | uuZkIWAABg8oJIBxD2aq8A== |
|---|---|
| Final Action Date | 2024-04-15 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0027851567 |
| Model | SIM7100E |
| Frequency Range | 902.75-927.25 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | RFID module |
| Responsible Party | Cai Ruohua, cairh@silion.com.cn , +86-1391-125-6616 |
| Technical Contact | Beijing Silion Technology Corp.,LTD., cairh@silion.com.cn |
| Test Firm | Jeff Zhu, Shenzhen Anbotek Compliance Laboratory Limited, jeff.zhu@anbotek.com  , 13798230942 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 10/08/2024 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change for this filling. Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| uuZkIWAABg8oJIBxD2aq8A== | 2024-04-15 | Class II permissive change or modification of presently authorized equipment |
| 0pndT1DKyGmLG4yNYu3rdw== | 2022-12-02 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.75-927.25 MHz | 0.9260000 | 15C |
Grants
TCB Grant - Application uuZkIWAABg8oJIBxD2aq8A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 04/15/2024 Application Dated: 04/11/2024 |
| Beijing Silion Technology Corp.,LTD. |
| 5 Floor, Building A, No.3 Longyu North St., |
| Changping District, |
| Beijing, 102200 China |
| Attention: Cai Ruohua |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ9M-SIM7100E |
| Name of Grantee: | Beijing Silion Technology Corp.,LTD. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.926 |
| Class II permissive change for this filling. Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
EAS Grant - Application uuZkIWAABg8oJIBxD2aq8A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Beijing Silion Technology Corp.,LTD. 5 Floor, Building A, No.3 Longyu North St., Changping District, Beijing, 102200 China |
Date of Grant: 04/15/2024 Application Dated: 04/11/2024 |
| Attention: Cai Ruohua |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ9M-SIM7100E |
| Name of Grantee: | Beijing Silion Technology Corp.,LTD. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.926 |
| Class II permissive change for this filling. Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 12/02/2022 Application Dated: 12/02/2022 |
| Beijing Silion Technology Corp.,LTD. |
| 5 Floor, Building A, No.3 Longyu North St., |
| Changping District, |
| Beijing, 102200 China |
| Attention: Cai Ruohua |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ9M-SIM7100E |
| Name of Grantee: | Beijing Silion Technology Corp.,LTD. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.926 |
| Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
EAS Grant - Application 0pndT1DKyGmLG4yNYu3rdw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Beijing Silion Technology Corp.,LTD. 5 Floor, Building A, No.3 Longyu North St., Changping District, Beijing, 102200 China |
Date of Grant: 12/02/2022 Application Dated: 12/02/2022 |
| Attention: Cai Ruohua |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQ9M-SIM7100E |
| Name of Grantee: | Beijing Silion Technology Corp.,LTD. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.926 |
| Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| Mail To: |