FCC ID 2AQ9Y-OPI4A

Development board

by Shenzhen Xunlong Software CO.,Limited

Grantee Code: 2AQ9Y   Product Code: OPI4A
Latest application date: 2025-12-26

FCC ID Device Details

FCC ID2AQ9Y-OPI4A
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AQ9Y
Product CodeOPI4A
Applicant BusinessShenzhen Xunlong Software CO.,Limited 🇨🇳
Related Domains 263.net fccusagent.com
Equipment ClassDevelopment board
Test FirmShenzhen NTEK Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2025-12-26
2402-2480 MHzOriginal Equipment2025-12-26
5745-5825 MHzOriginal Equipment2025-12-26

Exhibits

DocumentTypeAvailableFile
User Manual_part1Users Manual2026-06-24PDF 4.9 MB
User Manual_part2Users Manual2026-06-24PDF 3.8 MB
Internal photosInternal Photos2026-06-24PDF 214.6 KB
External photosExternal Photos2026-06-24PDF 178.8 KB
Label and its LocationID Label/Location Info2025-12-26PDF 1.7 MB
Test Setup photo---DSSTest Setup Photos2026-06-24PDF 1.5 MB
Test Setup photo---DTSTest Setup Photos2026-06-24PDF 1.5 MB
Test Setup photo---NIITest Setup Photos2026-06-24PDF 2.3 MB
2.4GWiFiTest Report2025-12-26PDF 4 MB
5GWIFI With DFSTest Report2025-12-26PDF 2.8 MB
Antenna specificationsTest Report2025-12-26PDF 1,006.3 KB
Attachment for 5G WIFI part1Test Report2025-12-26PDF 5.4 MB
Attachment for 5G WIFI part2Test Report2025-12-26PDF 5.5 MB
Attachment for 5G WIFI part3Test Report2025-12-26PDF 3.9 MB
BLETest Report2025-12-26PDF 4.4 MB
BTTest Report2025-12-26PDF 4.2 MB
2.911 (d)(5)(i) Certification Equipment Type v1.2Attestation Statements2025-12-26PDF 876.7 KB
2.911 (d)(5)(ii) Certificiation Applicant v1.3Attestation Statements2025-12-26PDF 912.9 KB
2.911 (d)(7) US agentAttestation Statements2025-12-26PDF 1.1 MB
FCC Short & Long Term Confidentiality Request Rev4.1Cover Letter(s)2025-12-26PDF 373.2 KB
FCC Software Configuration Control DeclarationCover Letter(s)2025-12-26PDF 302.8 KB
Letter of Authorization Rev2.0Cover Letter(s)2025-12-26PDF 711.5 KB
FCC-MPERF Exposure Info2025-12-26PDF 235.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 257.8 KB
SCH Metadata onlySchematicsPDF 616.1 KB
Operation Description Metadata onlyOperational DescriptionPDF 282.8 KB
FCC Software Security Requirements for UNII devices Metadata onlySDR Software/Security Info.PDF 5.8 MB
BOM Metadata onlyParts List/Tune Up InfoPDF 65.9 KB

Application Information

Application IDe67bKz/jHd4+a85lu4fzMA==
Final Action Date2025-12-26
Application PurposeOriginal Equipment
Applicant FRN0027856657
ModelOPI4A
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionDevelopment board
Responsible Partysteven zhao, zhao_steven@263.net , 0755 26765483
Technical ContactShenzhen Xunlong Software CO., Limited, zhao_steven@263.net
Non-Technical ContactTim Payne, FCC US Agent, LLC, Support@FCCUSAgent.com , 708-571-3148
Test FirmAlex Li, Shenzhen NTEK Testing Technology Co., Ltd., certification@ntek.org.cn , 8675561159384
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Long-Term ConfidentialityYes
Modular EquipmentDoes not apply
Composite DeviceYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
e67bKz/jHd4+a85lu4fzMA==2025-12-26Original Equipment
Ti43L1uHMTwH48UIn0s8Nw==2025-12-26Original Equipment
Pa4vRACl8dokzJt1GpmHGw==2025-12-26Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.0030215CCC
5180-5240 MHz0.0150715ECC
5260-5320 MHz0.0151415ECC ND
5500-5700 MHz0.0112315ECC ND
5745-5825 MHz0.0154215ECC
2402-2480 MHz0.0027415CCC
2412-2462 MHz0.0350815CCC

Grants

TCB Grant - Application Ti43L1uHMTwH48UIn0s8Nw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 12/26/2025

Application Dated: 12/26/2025
Shenzhen Xunlong Software CO.,Limited
Room 219, Area 2, Block B, Mingyou Purchasing
Center, Baoyuan Road, Bao'an,
Shenzhen,
China
 
Attention: steven zhao ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQ9Y-OPI4A
Name of Grantee:  Shenzhen Xunlong Software CO.,Limited
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Development board
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00302  

Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Pa4vRACl8dokzJt1GpmHGw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 12/26/2025

Application Dated: 12/26/2025
Shenzhen Xunlong Software CO.,Limited
Room 219, Area 2, Block B, Mingyou Purchasing
Center, Baoyuan Road, Bao'an,
Shenzhen,
China
 
Attention: steven zhao ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQ9Y-OPI4A
Name of Grantee:  Shenzhen Xunlong Software CO.,Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Development board
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.01507  
CC ND 15E 5260.0  -  5320.0 0.01514  
CC ND 15E 5500.0  -  5700.0 0.01123  
CC 15E 5745.0  -  5825.0 0.01542  

Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application e67bKz/jHd4+a85lu4fzMA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 12/26/2025

Application Dated: 12/26/2025
Shenzhen Xunlong Software CO.,Limited
Room 219, Area 2, Block B, Mingyou Purchasing
Center, Baoyuan Road, Bao'an,
Shenzhen,
China
 
Attention: steven zhao ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQ9Y-OPI4A
Name of Grantee:  Shenzhen Xunlong Software CO.,Limited
Equipment Class: Digital Transmission System
Notes: Development board
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00274  
CC 15C 2412.0  -  2462.0 0.03508  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.