FCC ID 2AQIP-NA3N301

NoiseAware Gen 3.1 collector

by NoiseAware, LLC

Grantee Code: 2AQIP   Product Code: NA3N301
Latest application date: 2021-06-29

FCC ID Device Details

FCC ID2AQIP-NA3N301
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AQIP
Product CodeNA3N301
Applicant BusinessNoiseAware, LLC 🇺🇸
Related Domains noiseaware.io
Equipment ClassNoiseAware Gen 3.1 collector
Test FirmEUROFINS ELECTRICAL AND ELECTRONIC TESTING NA, INC

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2021-06-29
902.2-927.8 MHzOriginal Equipment2021-06-29

Exhibits

DocumentTypeAvailableFile
user manualUsers Manual2021-06-29PDF 238 KB
internal photosInternal Photos2021-08-13PDF 807.9 KB
external photosExternal Photos2021-08-13PDF 1.2 MB
labelID Label/Location Info2021-06-29PDF 1,014.3 KB
set up photosTest Setup Photos2021-08-13PDF 404.8 KB
set up photosTest Setup Photos2021-08-13PDF 254.9 KB
Test reportTest Report2021-06-29PDF 1.5 MB
test report Metadata onlyTest Report2021-06-29PDF 2.2 MB
test report 1Test Report2021-06-29PDF 2.6 MB
test report 2Test Report2021-06-29PDF 3.7 MB
test report BLETest Report2021-06-29PDF 1.7 MB
test report WLANTest Report2021-06-29PDF 2.7 MB
long term confidentiality letterCover Letter(s)2021-06-29PDF 77.9 KB
short term confidentiality letterCover Letter(s)2021-06-29PDF 77.3 KB
block diagram Metadata onlyBlock DiagramPDF 88.4 KB
schematics Metadata onlySchematicsPDF 96 KB
operational description Metadata onlyOperational DescriptionPDF 629.1 KB

Application Information

Application IDGhSYkG3VwGPyrR7dAPma+Q==
Final Action Date2021-06-29
Application PurposeOriginal Equipment
Applicant FRN0027668318
ModelNA3N301
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionNoiseAware Gen 3.1 collector
Responsible PartyGarrett Lowen Dobbs, Head of Product, garrett@noiseaware.io , 2142329804
Technical ContactGarrett Dobbs, NoiseAware, Inc., garrett@noiseaware.io , 1 (214) 232-9804
Test FirmGreg Kovolenko, EUROFINS ELECTRICAL AND ELECTRONIC TESTING NA, INC, greg.kovolenko@metlabs.com , 4108444071
TCB Emailtcbinfo@metlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date08/13/2021
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower is listed as conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
GhSYkG3VwGPyrR7dAPma+Q==2021-06-29Original Equipment
Gg/dgUckhvDBXsvL+Lr/8w==2021-06-29Original Equipment

Equipment Authorization

FrequencyOutputRules
902.2-927.8 MHz0.143000015C
2402-2480 MHz0.000215C
2412-2462 MHz0.00315C
2422-2452 MHz0.001515C

Grants

TCB Grant - Application GhSYkG3VwGPyrR7dAPma+Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Electrical and Electronic Testing NA, Inc
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 06/29/2021

Application Dated: 06/29/2021
NoiseAware, LLC
2800 Routh St
Ste 215
Dallas, TX 75201
 
Attention: Garrett Dobbs , Head of Product

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQIP-NA3N301
Name of Grantee:  NoiseAware, LLC
Equipment Class: Digital Transmission System
Notes: NoiseAware Gen 3.1 collector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0002  
15C 2412.0  -  2462.0 0.003  
15C 2422.0  -  2452.0 0.0015  

Power is listed as conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application GhSYkG3VwGPyrR7dAPma+Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

NoiseAware, LLC
2800 Routh St Ste 215
Dallas, TX 75201
United States
  Date of Grant: 06/29/2021

Application Dated: 06/29/2021
 
Attention: Garrett Dobbs , Head of Product

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQIP-NA3N301
Name of Grantee:  NoiseAware, LLC
Equipment Class: Digital Transmission System
Notes: NoiseAware Gen 3.1 collector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0002  
15C 2412.0  -  2462.0 0.003  
15C 2422.0  -  2452.0 0.0015  

Power is listed as conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application Gg/dgUckhvDBXsvL+Lr/8w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Electrical and Electronic Testing NA, Inc
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 06/29/2021

Application Dated: 06/29/2021
NoiseAware, LLC
2800 Routh St
Ste 215
Dallas, TX 75201
 
Attention: Garrett Dobbs , Head of Product

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQIP-NA3N301
Name of Grantee:  NoiseAware, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: NoiseAware Gen 3.1 collector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.2  -  927.8 0.143  

Power is listed as conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application Gg/dgUckhvDBXsvL+Lr/8w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

NoiseAware, LLC
2800 Routh St Ste 215
Dallas, TX 75201
United States
  Date of Grant: 06/29/2021

Application Dated: 06/29/2021
 
Attention: Garrett Dobbs , Head of Product

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQIP-NA3N301
Name of Grantee:  NoiseAware, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: NoiseAware Gen 3.1 collector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.2  -  927.8 0.143  

Power is listed as conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: