FCC ID 2AQJP-MIP

Wireless Protocol Modules MiP Series

by Mipot

Grantee Code: 2AQJP   Product Code: MIP
Latest application date: 2024-04-11

FCC ID Device Details

FCC ID2AQJP-MIP
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AQJP
Product CodeMIP
Applicant BusinessMipot 🇮🇹
Related Domains mipot.com
Equipment ClassWireless Protocol Modules MiP Series
Test FirmDekra Testing and Certification S.r.l.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
903-914.2 MHzOriginal Equipment2024-04-11
903-914.2 MHzOriginal Equipment2024-04-11

Exhibits

DocumentTypeAvailableFile
32001505-US_Datasheet_rev1.5Users Manual2024-10-08PDF 918.3 KB
32001506-US_Datasheet_rev1.0Users Manual2024-10-08PDF 526.1 KB
32001551-US_Datasheet_rev1.0Users Manual2024-10-08PDF 473 KB
32001552-US_Datasheet_rev1.0Users Manual2024-10-08PDF 512.8 KB
INTERNAL PHOTOGRAPHSInternal Photos2024-10-08PDF 1.4 MB
EXTERNAL PHOTOGRAPHSExternal Photos2024-10-08PDF 912.1 KB
32001505BUSID Label/Location Info2024-04-11PDF 122.3 KB
PRODUCT LABEL DESINGID Label/Location Info2024-04-11PDF 1.1 MB
69260REM.002A1_PhotographsTest Setup Photos2024-10-08PDF 245.5 KB
69260RRF002A1_PhotographsTest Setup Photos2024-10-08PDF 895.9 KB
75151REM.002_PhotographsTest Setup Photos2024-10-08PDF 215.7 KB
2j0b15-c885g_ antennaTest Report2024-04-11PDF 1.2 MB
69260REM.002A1sTest Report2024-04-11PDF 1,018 KB
69260RRF002A1sTest Report2024-04-11PDF 3.5 MB
75151REM.002sTest Report2024-04-11PDF 1,019.5 KB
Certifications concerning covered equipmentAttestation Statements2024-04-11PDF 366.1 KB
FCC US Agent Attestation_Mipot Spa_2AQJP-MIP_signedAttestation Statements2024-04-11PDF 487.2 KB
PRODUCT LABEL DESINGAttestation Statements2024-04-11PDF 1.1 MB
DoI_32001505xUS_modCover Letter(s)2024-04-11PDF 197.6 KB
FCB011_02 FCC Agent letter_V1Cover Letter(s)2024-04-11PDF 222.1 KB
FCB012_05 FCC Confidentiality Request_V1Cover Letter(s)2024-04-11PDF 252.8 KB
FCB013_02 FCC Modular approval letter-Unlicensed_v1Cover Letter(s)2024-04-11PDF 250.2 KB
FCB034_00 FCC DoC Declaration letterCover Letter(s)2024-04-11PDF 495.8 KB
PRODUCT LABEL DESINGCover Letter(s)2024-04-11PDF 1.1 MB
69260RAN.002A1s - FCCRF Exposure Info2024-04-11PDF 569.9 KB
32001505BUSID Label/Location Info2024-04-11PDF 46.4 KB
32001506BUSID Label/Location Info2024-04-11PDF 47.9 KB
32001551BUSID Label/Location Info2024-04-11PDF 46.9 KB
32001552BUSID Label/Location Info2024-04-11PDF 47.8 KB
32001552_PM_r0 Metadata onlyBlock DiagramPDF 364.3 KB
A4001514_LO_r1 Metadata onlyBlock DiagramPDF 188 KB
Block Diagram Metadata onlyBlock DiagramPDF 367.9 KB
Block of diagram 32001505xUS Metadata onlyBlock DiagramPDF 506 KB
Block of diagram 32001506xUS Metadata onlyBlock DiagramPDF 513.6 KB
Block of diagram 32001551xUS Metadata onlyBlock DiagramPDF 509 KB
Block of diagram 32001552xUS Metadata onlyBlock DiagramPDF 515.4 KB
32001505_SCH_r2 Metadata onlySchematicsPDF 485.2 KB
32001506_SCH_r2 Metadata onlySchematicsPDF 521.9 KB
32001551_SCH_r2 Metadata onlySchematicsPDF 521.8 KB
32001552_SCH_r2 Metadata onlySchematicsPDF 521.8 KB
2j0b15-c885g_antenna Metadata onlyOperational DescriptionPDF 1.2 MB
32001552_PM_r0 Metadata onlyOperational DescriptionPDF 364.3 KB
stm32wl55jc Metadata onlyOperational DescriptionPDF 3 MB
stm32wl55jc_552_506 Metadata onlyOperational DescriptionPDF 3 MB
stm32wle5cc Metadata onlyOperational DescriptionPDF 3 MB
stm32wle5cc_551_505 Metadata onlyOperational DescriptionPDF 3 MB
32001505AUS Metadata onlyParts List/Tune Up InfoPDF 46.8 KB
32001505AUS_Bill Metadata onlyParts List/Tune Up InfoPDF 46.8 KB
32001505BUS Metadata onlyParts List/Tune Up InfoPDF 46.4 KB
32001505BUS_Bill Metadata onlyParts List/Tune Up InfoPDF 46.4 KB
32001505CUS Metadata onlyParts List/Tune Up InfoPDF 46.6 KB
32001505CUS_Bill Metadata onlyParts List/Tune Up InfoPDF 46.6 KB
32001505DUS Metadata onlyParts List/Tune Up InfoPDF 46.4 KB
32001505DUS_Bill Metadata onlyParts List/Tune Up InfoPDF 46.4 KB
32001505FUS Metadata onlyParts List/Tune Up InfoPDF 46.6 KB
32001505FUS_Bill Metadata onlyParts List/Tune Up InfoPDF 46.6 KB
32001506AUS Metadata onlyParts List/Tune Up InfoPDF 47.9 KB
32001506CUS Metadata onlyParts List/Tune Up InfoPDF 47.8 KB
32001506FUS Metadata onlyParts List/Tune Up InfoPDF 47.8 KB
32001551AUS Metadata onlyParts List/Tune Up InfoPDF 46.9 KB
32001551BUS Metadata onlyParts List/Tune Up InfoPDF 46.9 KB
32001551CUS Metadata onlyParts List/Tune Up InfoPDF 46.9 KB
32001551FUS Metadata onlyParts List/Tune Up InfoPDF 46.9 KB
32001552AUS Metadata onlyParts List/Tune Up InfoPDF 47.8 KB
32001552BUS Metadata onlyParts List/Tune Up InfoPDF 47.8 KB
32001552CUS Metadata onlyParts List/Tune Up InfoPDF 47.8 KB
32001552DUS Metadata onlyParts List/Tune Up InfoPDF 47.8 KB
32001552FUS Metadata onlyParts List/Tune Up InfoPDF 47.8 KB

Application Information

Application IDz5r6F6H2U7zp0u7T6mMf6g==
Final Action Date2024-04-11
Application PurposeOriginal Equipment
Applicant FRN0027674233
ModelMIP
Frequency Range903-914.2 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless Protocol Modules MiP Series
Responsible PartyTomaz Petaros, CEO, tpetaros@mipot.com , +390481630200
AgentFabio Fabio Fabio, Dekra Testing and Certification Srl, fabio.carraro@dekra.com
Test FirmFrancesco Boschiero, Dekra Testing and Certification S.r.l., francesco.boschiero@dekra.com , +39 0445 367702
TCB Emailadmin.rcb.es@dekra.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date10/08/2024
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power is conducted Single Modular Approval. This module is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 product terms and concepts. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.

Applications

Application IDDatePurpose
z5r6F6H2U7zp0u7T6mMf6g==2024-04-11Original Equipment
ugdLMGlGmEBmThZhPkcvVw==2024-04-11Original Equipment
LU1i3tuodmeTZeZUGdI6kg==2024-04-11Original Equipment

Equipment Authorization

FrequencyOutputEmissionRulesGrant Notes
15BCC
903-914.2 MHz0.0741300500KF1D15CCC
903-914.2 MHz0.0778000125KFXD15CCC

Grants

TCB Grant - Application z5r6F6H2U7zp0u7T6mMf6g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  DEKRA Testing and Certification, S.A.U.
Parque Tecnologico de Andalucia, Calle Severo Ochoa 2 y 6
Campanillas - Malaga, 29590
Spain
Date of Grant: 04/11/2024

Application Dated: 04/09/2024
Mipot
Via Corona 5
Cormons, 34071
Italy
 
Attention: Tomaz Petaros , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQJP-MIP
Name of Grantee:  Mipot
Equipment Class: Digital Transmission System
Notes: Wireless Protocol Modules MiP Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 903.0  -  914.2 0.07413   500KF1D

Output power is conducted

Single Modular Approval.

This module is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons.

Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 product terms and concepts.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application z5r6F6H2U7zp0u7T6mMf6g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mipot
Via Corona 5
Cormons, 34071
Italy
  Date of Grant: 04/11/2024

Application Dated: 04/09/2024
 
Attention: Tomaz Petaros , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQJP-MIP
Name of Grantee:  Mipot
Equipment Class: Digital Transmission System
Notes: Wireless Protocol Modules MiP Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 903.0  -  914.2 0.07413   500KF1D

Output power is conducted

Single Modular Approval.

This module is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons.

Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 product terms and concepts.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application ugdLMGlGmEBmThZhPkcvVw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  DEKRA Testing and Certification, S.A.U.
Parque Tecnologico de Andalucia, Calle Severo Ochoa 2 y 6
Campanillas - Malaga, 29590
Spain
Date of Grant: 04/11/2024

Application Dated: 04/09/2024
Mipot
Via Corona 5
Cormons, 34071
Italy
 
Attention: Tomaz Petaros , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQJP-MIP
Name of Grantee:  Mipot
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Protocol Modules MiP Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 903.0  -  914.2 0.0778   125KFXD

Output power is conducted

Single Modular Approval.

This module is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons.

Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 product terms and concepts.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ugdLMGlGmEBmThZhPkcvVw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mipot
Via Corona 5
Cormons, 34071
Italy
  Date of Grant: 04/11/2024

Application Dated: 04/09/2024
 
Attention: Tomaz Petaros , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQJP-MIP
Name of Grantee:  Mipot
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Protocol Modules MiP Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 903.0  -  914.2 0.0778   125KFXD

Output power is conducted

Single Modular Approval.

This module is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons.

Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 product terms and concepts.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application LU1i3tuodmeTZeZUGdI6kg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  DEKRA Testing and Certification, S.A.U.
Parque Tecnologico de Andalucia, Calle Severo Ochoa 2 y 6
Campanillas - Malaga, 29590
Spain
Date of Grant: 04/11/2024

Application Dated: 04/09/2024
Mipot
Via Corona 5
Cormons, 34071
Italy
 
Attention: Tomaz Petaros , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQJP-MIP
Name of Grantee:  Mipot
Equipment Class: Part 15 Class B Digital Device
Notes: Wireless Protocol Modules MiP Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 

Single Modular Approval.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application LU1i3tuodmeTZeZUGdI6kg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mipot
Via Corona 5
Cormons, 34071
Italy
  Date of Grant: 04/11/2024

Application Dated: 04/09/2024
 
Attention: Tomaz Petaros , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQJP-MIP
Name of Grantee:  Mipot
Equipment Class: Part 15 Class B Digital Device
Notes: Wireless Protocol Modules MiP Series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 

Single Modular Approval.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: