FCC ID 2AQOI-NODE

M2A Mesh Node

by ShenZhen Mcdinet Technology Co.,Ltd.

Grantee Code: 2AQOI   Product Code: NODE
Latest application date: 2018-08-16

FCC ID Device Details

FCC ID2AQOI-NODE
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AQOI
Product CodeNODE
Applicant BusinessShenZhen Mcdinet Technology Co.,Ltd. 🇨🇳
Equipment ClassM2A Mesh Node
Test FirmDongguan Dongdian Testing Service Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: 2APR4-BEE Grant Date: 07/25/20182018-08-16
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: 2APR4-BEE Grant Date: 07/25/20182018-08-16

Exhibits

DocumentTypeAvailableFile
External_photosExternal Photos2019-02-12PDF 448.5 KB
M2A_Node_label2ID Label/Location Info2018-08-16PDF 199.5 KB
Agent_Authorization_Rev_1.0Cover Letter(s)2018-08-16PDF 22.7 KB
Declaration_letter_of_difference_V1Cover Letter(s)2018-08-16PDF 57.4 KB
FCC Authority to Act as AgentCover Letter(s)2018-08-16PDF 53.9 KB
FCC Request for change in ID Rev 2.1Cover Letter(s)2018-08-16PDF 93.8 KB
FCC_Authorization_from_Original_Grantee_for_ID_change_V1.1Cover Letter(s)2018-08-16PDF 49.6 KB
FCC_Short-Long Term Confidentiality Request Rev4.0Cover Letter(s)2018-08-16PDF 64 KB

Application Information

Application IDQrZHM/P8ILM8jahqXv+Wmw==
Final Action Date2018-08-16
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: 2APR4-BEE Grant Date: 07/25/2018
Applicant FRN0027712108
ModelNODE
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionM2A Mesh Node
Responsible Partyqiuhong Li, qiuhong_lee@126.com , 13825284915
Technical ContactShenZhen Mcdinet Technology Co.,Ltd, Qiuhong_lee@126.com
Test FirmMr. Jamy Yu, Dongguan Dongdian Testing Service Co., Ltd., jamy@dgieie.com , +86-0769-89201646
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date02/12/2019
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is maximum combined conducted power.Device is a 2x2 MIMO as is described in the filing.This device contains 20 and 40 MHz signal bandwidth.The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
QrZHM/P8ILM8jahqXv+Wmw==2018-08-16Change in identification of presently authorized equipment. Original FCC ID: 2APR4-BEE Grant Date: 07/25/2018
Q+Thm9lgDEeYPuunGAV5Pw==2018-08-16Change in identification of presently authorized equipment. Original FCC ID: 2APR4-BEE Grant Date: 07/25/2018

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.276000015CCC, MO
5180-5240 MHz0.11915E38, CC, MO
5745-5825 MHz0.18615E38, CC, MO

Grants

TCB Grant - Application QrZHM/P8ILM8jahqXv+Wmw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 08/16/2018

Application Dated: 08/16/2018
ShenZhen Mcdinet Technology Co.,Ltd.
Room 601, Unit A1, Kexing Science Park,
No.15 Keyuan Road,Hi-tech lndustrial Park,Nanshan
Shenzhen,
China
 
Attention: qiuhong Li

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQOI-NODE
Name of Grantee:  ShenZhen Mcdinet Technology Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: M2A Mesh Node
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.276  

Output power listed is maximum combined conducted power.Device is a 2x2 MIMO as is described in the filing.This device contains 20 and 40 MHz signal bandwidth.The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application QrZHM/P8ILM8jahqXv+Wmw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ShenZhen Mcdinet Technology Co.,Ltd.
Room 601, Unit A1, Kexing Science Park, No.15 Keyuan Road,Hi-tech lndustrial Park,Nanshan
Shenzhen,
China
  Date of Grant: 08/16/2018

Application Dated: 08/16/2018
 
Attention: qiuhong Li

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQOI-NODE
Name of Grantee:  ShenZhen Mcdinet Technology Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: M2A Mesh Node
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.276  

Output power listed is maximum combined conducted power.Device is a 2x2 MIMO as is described in the filing.This device contains 20 and 40 MHz signal bandwidth.The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Q+Thm9lgDEeYPuunGAV5Pw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 08/16/2018

Application Dated: 08/16/2018
ShenZhen Mcdinet Technology Co.,Ltd.
Room 601, Unit A1, Kexing Science Park,
No.15 Keyuan Road,Hi-tech lndustrial Park,Nanshan
Shenzhen,
China
 
Attention: qiuhong Li

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQOI-NODE
Name of Grantee:  ShenZhen Mcdinet Technology Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: M2A Mesh Node
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.119  
38 CC MO 15E 5745.0  -  5825.0 0.186  

Output power listed is maximum combined conducted power.Device is a 2x2 MIMO as is described in the filing.This device contains 20, 40 and 80 MHz signal bandwidth.The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Q+Thm9lgDEeYPuunGAV5Pw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ShenZhen Mcdinet Technology Co.,Ltd.
Room 601, Unit A1, Kexing Science Park, No.15 Keyuan Road,Hi-tech lndustrial Park,Nanshan
Shenzhen,
China
  Date of Grant: 08/16/2018

Application Dated: 08/16/2018
 
Attention: qiuhong Li

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AQOI-NODE
Name of Grantee:  ShenZhen Mcdinet Technology Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: M2A Mesh Node
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.119  
38 CC MO 15E 5745.0  -  5825.0 0.186  

Output power listed is maximum combined conducted power.Device is a 2x2 MIMO as is described in the filing.This device contains 20, 40 and 80 MHz signal bandwidth.The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: