FCC ID 2AQQC-CC3220MOD
WiFi Module
by Perforce Outdoors LLC
Grantee Code: 2AQQC Product Code: CC3220MOD
Latest application date: 2019-01-02
FCC ID Device Details
| FCC ID | 2AQQC-CC3220MOD |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AQQC |
| Product Code | CC3220MOD |
| Applicant Business | Perforce Outdoors LLC 🇺🇸 |
| Related Domains |  perforceoutdoors.com |
| Equipment Class | WiFi Module |
| Test Firm | Nebraska Center for Excellence in Electronics |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2019-01-02 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-CC3220MOD Grant Date: 06/23/2017 | 2018-12-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2018-12-27 | PDF 85 KB |
| External Photos | External Photos | 2018-12-27 | PDF 2 MB |
| Label | ID Label/Location Info | 2018-12-27 | PDF 61.9 KB |
| Test Photos | Test Setup Photos | 2019-01-02 | PDF 503.9 KB |
| Test Repot | Test Report | 2019-01-02 | PDF 1.5 MB |
| Agent Authorization | Cover Letter(s) | 2019-01-02 | PDF 754.8 KB |
| CIIPC Cover Letter | Cover Letter(s) | 2019-01-02 | PDF 203.5 KB |
| Change in ID Request | Cover Letter(s) | 2018-12-27 | PDF 603.1 KB |
| Manufacturer Letter | Cover Letter(s) | 2018-12-27 | PDF 35.5 KB |
| Modular Approval Letter | Cover Letter(s) | 2018-12-27 | PDF 497.9 KB |
| Antenna Datasheet | RF Exposure Info | 2019-01-02 | PDF 579.2 KB |
| Antenna gain information | RF Exposure Info | 2019-01-02 | PDF 77.8 KB |
| MPE | RF Exposure Info | 2019-01-02 | PDF 267.1 KB |
Application Information
| Application ID | 4yX9rNgchP/tIbQ2d1/QoQ== |
|---|---|
| Final Action Date | 2019-01-02 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0027727098 |
| Model | CC3220MOD |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WiFi Module |
| Responsible Party | Andrew Parr, Owner, andrew@perforceoutdoors.com , 4023179701 |
| Test Firm | Nic Johnson, Nebraska Center for Excellence in Electronics, njohnson@nceelabs.com  , 4023236233 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This Permissive Change authorizes a new antenna. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 4yX9rNgchP/tIbQ2d1/QoQ== | 2019-01-02 | Class II permissive change or modification of presently authorized equipment |
| ibEZls8ObNZ/J8zp5eUWzQ== | 2018-12-27 | Change in identification of presently authorized equipment. Original FCC ID: Z64-CC3220MOD Grant Date: 06/23/2017 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.1074000 | 15C |
Grants
TCB Grant - Application ibEZls8ObNZ/J8zp5eUWzQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/27/2018 Application Dated: 12/27/2018 |
| Perforce Outdoors LLC |
| 4421 W Thatcher Ln |
| Lincoln, NE 68528 |
| Attention: Andrew Parr , Owner |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQQC-CC3220MOD |
| Name of Grantee: | Perforce Outdoors LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1074 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
EAS Grant - Application ibEZls8ObNZ/J8zp5eUWzQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Perforce Outdoors LLC 4421 W Thatcher Ln Lincoln, NE 68528 United States |
Date of Grant: 12/27/2018 Application Dated: 12/27/2018 |
| Attention: Andrew Parr , Owner |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQQC-CC3220MOD |
| Name of Grantee: | Perforce Outdoors LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1074 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 01/02/2019 Application Dated: 01/02/2019 |
| Perforce Outdoors LLC |
| 4421 W Thatcher Ln |
| Lincoln, NE 68528 |
| Attention: Andrew Parr , Owner |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQQC-CC3220MOD |
| Name of Grantee: | Perforce Outdoors LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1074 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This Permissive Change authorizes a new antenna. |
EAS Grant - Application 4yX9rNgchP/tIbQ2d1/QoQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Perforce Outdoors LLC 4421 W Thatcher Ln Lincoln, NE 68528 United States |
Date of Grant: 01/02/2019 Application Dated: 01/02/2019 |
| Attention: Andrew Parr , Owner |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQQC-CC3220MOD |
| Name of Grantee: | Perforce Outdoors LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1074 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This Permissive Change authorizes a new antenna. |
| Mail To: |