FCC ID 2AQYD-WLT311
Temperature/humidity sensor with LoRa radio
by Lapp Automaatio Oy
Grantee Code: 2AQYD Product Code: WLT311
Latest application date: 2020-01-29
FCC ID Device Details
| FCC ID | 2AQYD-WLT311 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AQYD |
| Product Code | WLT311 |
| Applicant Business | Lapp Automaatio Oy 🇫🇮 |
| Related Domains |  lappgroup.com |
| Equipment Class | Temperature/humidity sensor with LoRa radio |
| Test Firm | SGS Fimko Oy |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 903-914.2 MHz | Original Equipment | 2020-01-29 |
| 902.3-914.9 MHz | Original Equipment | 2020-01-29 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2020-01-29 | PDF 877.2 KB |
| Internal Photos | Internal Photos | 2020-01-29 | PDF 1.3 MB |
| External Photos | External Photos | 2020-01-29 | PDF 832.1 KB |
| Label | ID Label/Location Info | 2020-01-29 | PDF 117.7 KB |
| Label Location Info | ID Label/Location Info | 2020-01-29 | PDF 132.9 KB |
| Test Setup Photos | Test Setup Photos | 2020-01-29 | PDF 683 KB |
| Test Report | Test Report | 2020-01-29 | PDF 3.4 MB |
| Test Report MPE | Test Report | 2020-01-29 | PDF 147.3 KB |
| Agent Authorization Letter | Cover Letter(s) | 2020-01-29 | PDF 148.3 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2020-01-29 | PDF 147.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 58.3 KB | |
| Schematics Metadata only | Schematics | PDF 85.3 KB | |
| Operational Description Metadata only | Operational Description | PDF 37.5 KB | |
| Operational Description Antenna Metadata only | Operational Description | PDF 301.8 KB | |
| BOM Parts List Metadata only | Parts List/Tune Up Info | PDF 514 KB |
Application Information
| Application ID | kaVziDdx96wphkrLNNuZPQ== |
|---|---|
| Final Action Date | 2020-01-29 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0027776558 |
| Model | WLT311 |
| Frequency Range | 903-914.2 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Temperature/humidity sensor with LoRa radio |
| Responsible Party | Janne Talvitie, janne.talvitie@lappgroup.com , +358400273593 |
| Technical Contact | Janne Talvitie, Lapp Automaatio Oy, janne.talvitie@lappgroup.com , 358400273593 |
| Non-Technical Contact | Janne Talvitie, Lapp Automaatio Oy, janne.talvitie@lappgroup.com , 358400273593 |
| Test Firm | Janne Nyman, SGS Fimko Oy, janne.nyman@sgs.eom  , +358 9 696 361 |
| TCB Email | uscts.tcb@sgs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For fixed operating configurations the antenna gain, including cable loss, must not exceed 2.2 dBi for satisfying RF exposure compliance according to as defined in 2.1091. This device supports 125 kHz and 500 kHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| kaVziDdx96wphkrLNNuZPQ== | 2020-01-29 | Original Equipment |
| WrE/tqgssFCuJOUvLjchDw== | 2020-01-29 | Original Equipment |
Grants
TCB Grant - Application WrE/tqgssFCuJOUvLjchDw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 01/29/2020 Application Dated: 01/29/2020 |
| Lapp Automaatio Oy |
| Martinkylantie 52 |
| Vantaa, 01720 Finland |
| Attention: Janne Talvitie |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQYD-WLT311 |
| Name of Grantee: | Lapp Automaatio Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Temperature/humidity sensor with LoRa radio |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0133045 |
| Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For fixed operating configurations the antenna gain, including cable loss, must not exceed 2.2 dBi for satisfying RF exposure compliance according to as defined in 2.1091. This device supports 125 kHz and 500 kHz bandwidth modes. |
EAS Grant - Application WrE/tqgssFCuJOUvLjchDw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lapp Automaatio Oy Martinkylantie 52 Vantaa, 01720 Finland |
Date of Grant: 01/29/2020 Application Dated: 01/29/2020 |
| Attention: Janne Talvitie |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQYD-WLT311 |
| Name of Grantee: | Lapp Automaatio Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Temperature/humidity sensor with LoRa radio |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0133045 |
| Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For fixed operating configurations the antenna gain, including cable loss, must not exceed 2.2 dBi for satisfying RF exposure compliance according to as defined in 2.1091. This device supports 125 kHz and 500 kHz bandwidth modes. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 01/29/2020 Application Dated: 01/29/2020 |
| Lapp Automaatio Oy |
| Martinkylantie 52 |
| Vantaa, 01720 Finland |
| Attention: Janne Talvitie |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQYD-WLT311 |
| Name of Grantee: | Lapp Automaatio Oy |
| Equipment Class: | Digital Transmission System |
| Notes: | Temperature/humidity sensor with LoRa radio |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.0 - 914.2 | 0.0133045 |
| Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For fixed operating configurations the antenna gain, including cable loss, must not exceed 2.2 dBi for satisfying RF exposure compliance according to as defined in 2.1091. This device supports 125 kHz and 500 kHz bandwidth modes. |
EAS Grant - Application kaVziDdx96wphkrLNNuZPQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lapp Automaatio Oy Martinkylantie 52 Vantaa, 01720 Finland |
Date of Grant: 01/29/2020 Application Dated: 01/29/2020 |
| Attention: Janne Talvitie |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQYD-WLT311 |
| Name of Grantee: | Lapp Automaatio Oy |
| Equipment Class: | Digital Transmission System |
| Notes: | Temperature/humidity sensor with LoRa radio |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.0 - 914.2 | 0.0133045 |
| Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For fixed operating configurations the antenna gain, including cable loss, must not exceed 2.2 dBi for satisfying RF exposure compliance according to as defined in 2.1091. This device supports 125 kHz and 500 kHz bandwidth modes. |
| Mail To: |