FCC ID 2AQYN9603N
Short Burst Data Transceiver
by Somewear Labs, Inc.
Grantee Code: 2AQYN Product Code: 9603N
Latest application date: 2018-08-29
FCC ID Device Details
| FCC ID | 2AQYN9603N |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AQYN |
| Product Code | 9603N |
| Applicant Business | Somewear Labs, Inc. 🇺🇸 |
| Related Domains |  somewearlabs.com |
| Equipment Class | Short Burst Data Transceiver |
| Test Firm | Nemko USA, Inc. - San Diego EMC Division |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 1616-1625.5 MHz | Class II permissive change or modification of presently authorized equipment | 2018-08-29 |
| 1616-1625.5 MHz | Change in identification of presently authorized equipment. Original FCC ID: Q639603N Grant Date: 08/27/2014 | 2018-08-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2018-08-29 | PDF 336.7 KB |
| External photos | External Photos | 2018-08-29 | PDF 4.2 MB |
| External Photos | External Photos | 2018-08-28 | PDF 4.2 MB |
| Label and Label Location | ID Label/Location Info | 2018-08-29 | PDF 4.2 MB |
| Block diagram | Block Diagram | 2018-08-29 | PDF 235.9 KB |
| Operational Description | Operational Description | 2018-08-29 | PDF 1.5 MB |
| Test Report | Test Report | 2018-08-29 | PDF 2 MB |
| Cover Letters | Cover Letter(s) | 2018-08-29 | PDF 158.1 KB |
| Cover letters | Cover Letter(s) | 2018-08-29 | PDF 227 KB |
| Cover Letters | Cover Letter(s) | 2018-08-28 | PDF 297.1 KB |
| RF exposure info | RF Exposure Info | 2018-08-29 | PDF 2.3 MB |
Application Information
| Application ID | hIPi7myhmKhJw9P70LJyLQ== |
|---|---|
| Final Action Date | 2018-08-29 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0027783794 |
| Model | 9603N |
| Frequency Range | 1616-1625.5 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | Short Burst Data Transceiver |
| Responsible Party | James Kubik, james@somewearlabs.com , 6304158120 |
| Test Firm | Charles Neal, Nemko USA, Inc. - San Diego EMC Division, charles.neal@nemko.com  , 613-737-9680 x239 |
| TCB Email | Stuart.Beck@nemko.com |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to integrate this module into portable host platform, model SWL-1, with module from Laird BL652 SA01 (FCC ID: SQGBL652). Output power listed is peak EIRP with maximum antenna gain of 3 dBi allowed. This module is approved in mobile/fixed configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.41 W/kg and 1.52W/kg, respectively |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| hIPi7myhmKhJw9P70LJyLQ== | 2018-08-29 | Class II permissive change or modification of presently authorized equipment |
| sDCsLL8s/4kAf3KrlY8SmA== | 2018-08-28 | Change in identification of presently authorized equipment. Original FCC ID: Q639603N Grant Date: 08/27/2014 |
Equipment Authorization
Grants
TCB Grant - Application sDCsLL8s/4kAf3KrlY8SmA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 08/28/2018 Application Dated: 08/28/2018 |
| Somewear Labs, Inc. |
| 1040 Mariposa Street |
| San Francisco, CA 94107 |
| Attention: James Kubik |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQYN9603N |
| Name of Grantee: | Somewear Labs, Inc. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Short Burst Data Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 25 | 1616.0 - 1625.5 | 1.479 | 3.208 PM | 41K7Q7D |
| Single Modular Approval. Output power listed is peak EIRP with maximum antenna gain of 3 dBi allowed. This module is approved in mobile/fixed configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application sDCsLL8s/4kAf3KrlY8SmA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Somewear Labs, Inc. 1040 Mariposa Street San Francisco, CA 94107 United States |
Date of Grant: 08/28/2018 Application Dated: 08/28/2018 |
| Attention: James Kubik |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQYN9603N |
| Name of Grantee: | Somewear Labs, Inc. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Short Burst Data Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 25 | 1616.0 - 1625.5 | 1.479 | 3.208 PM | 41K7Q7D |
| Single Modular Approval. Output power listed is peak EIRP with maximum antenna gain of 3 dBi allowed. This module is approved in mobile/fixed configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 08/29/2018 Application Dated: 08/29/2018 |
| Somewear Labs, Inc. |
| 1040 Mariposa Street |
| San Francisco, CA 94107 |
| Attention: James Kubik |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQYN9603N |
| Name of Grantee: | Somewear Labs, Inc. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Short Burst Data Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 25 | 1616.0 - 1625.5 | 1.479 | 3.208 PM | 41K7Q7D |
| Class II Permissive Change to integrate this module into portable host platform, model SWL-1, with module from Laird BL652 SA01 (FCC ID: SQGBL652). Output power listed is peak EIRP with maximum antenna gain of 3 dBi allowed. This module is approved in mobile/fixed configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.41 W/kg and 1.52W/kg, respectively |
EAS Grant - Application hIPi7myhmKhJw9P70LJyLQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Somewear Labs, Inc. 1040 Mariposa Street San Francisco, CA 94107 United States |
Date of Grant: 08/29/2018 Application Dated: 08/29/2018 |
| Attention: James Kubik |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AQYN9603N |
| Name of Grantee: | Somewear Labs, Inc. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Short Burst Data Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 25 | 1616.0 - 1625.5 | 1.479 | 3.208 PM | 41K7Q7D |
| Class II Permissive Change to integrate this module into portable host platform, model SWL-1, with module from Laird BL652 SA01 (FCC ID: SQGBL652). Output power listed is peak EIRP with maximum antenna gain of 3 dBi allowed. This module is approved in mobile/fixed configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.41 W/kg and 1.52W/kg, respectively |
| Mail To: |