FCC ID 2AR82-SKIWB821CU2
IEEE 802.11a/b/g/n/ac 1T1R USB Wi-Fi Module Integrated Bluetooth 2.1+BR/ EDR/4.2
by Guangzhou Shikun Electronics Co., Ltd
Grantee Code: 2AR82 Product Code: SKIWB821CU2
Latest application date: 2022-03-17
FCC ID Device Details
| FCC ID | 2AR82-SKIWB821CU2 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AR82 |
| Product Code | SKIWB821CU2 |
| Applicant Business | Guangzhou Shikun Electronics Co., Ltd 🇨🇳 |
| Related Domains |  cvte.com |
| Equipment Class | IEEE 802.11a/b/g/n/ac 1T1R USB Wi-Fi Module Integrated Bluetooth 2.1+BR/ EDR/4.2 |
| Test Firm | UL Verification Services (Guangzhou) Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5745-5825 MHz | Original Equipment | 2022-03-17 |
| 2402-2480 MHz | Original Equipment | 2022-03-17 |
| 2402-2480 MHz | Original Equipment | 2022-03-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2022-03-17 | PDF 1,004.6 KB |
| User Manual2 | Users Manual | 2022-03-17 | PDF 259 KB |
| user manual2 | Users Manual | 2022-03-17 | PDF 259 KB |
| Internal Photos | Internal Photos | 2022-03-17 | PDF 109.2 KB |
| Internal photos | Internal Photos | 2022-03-17 | PDF 109.2 KB |
| External Photos | External Photos | 2022-03-17 | PDF 249 KB |
| External photos | External Photos | 2022-03-17 | PDF 249 KB |
| Label | ID Label/Location Info | 2022-03-17 | PDF 44.8 KB |
| Label Location | ID Label/Location Info | 2022-03-17 | PDF 44.8 KB |
| Label and location | ID Label/Location Info | 2022-03-17 | PDF 44.8 KB |
| Test Setup Photos | Test Setup Photos | 2022-03-17 | PDF 358.1 KB |
| Test Report | Test Report | 2022-03-17 | PDF 5 MB |
| Test Report | Test Report | 2022-03-17 | PDF 3.7 MB |
| Test Report | Test Report | 2022-03-17 | PDF 4.6 MB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2022-03-17 | PDF 14.8 KB |
| FCC Modular Approval Request Rev 3.0 | Cover Letter(s) | 2022-03-17 | PDF 71.1 KB |
| FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2022-03-17 | PDF 66.1 KB |
| FCC Software Configuration Control Declaration Rev1.1 | Cover Letter(s) | 2022-03-17 | PDF 62.4 KB |
| RF Exposure | RF Exposure Info | 2022-03-17 | PDF 202 KB |
| Block Metadata only | Block Diagram | PDF 337.1 KB | |
| BlockDiagram Metadata only | Block Diagram | PDF 337.1 KB | |
| SCH Metadata only | Schematics | PDF 396.4 KB | |
| OP Metadata only | Operational Description | PDF 80.5 KB | |
| Operation Description Metadata only | Operational Description | PDF 80.5 KB | |
| Software Security Requirements For U-NII Devices Metadata only | SDR Software/Security Inf | PDF 113.6 KB |
Application Information
| Application ID | wxAocWULVDJon8F/2IWmEA== |
|---|---|
| Final Action Date | 2022-03-17 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0028116184 |
| Model | SKIWB821CU2 |
| Frequency Range | 5745-5825 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | IEEE 802.11a/b/g/n/ac 1T1R USB Wi-Fi Module Integrated Bluetooth 2.1+BR/ EDR/4.2 |
| Responsible Party | Bing Yi, Certification Manager, yibing@cvte.com , 13826160417 |
| Technical Contact | Guangzhou Shikun Electronics Co., Ltd, yibing@cvte.com |
| Test Firm | Stephen Guo, UL Verification Services (Guangzhou) Co., Ltd., Stephen.guo@ul.com  , +86 0769 33817120 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| wxAocWULVDJon8F/2IWmEA== | 2022-03-17 | Original Equipment |
| rn91qZK+1v3edtFe8v/CWg== | 2022-03-17 | Original Equipment |
| BWiNJnc+xDyJi4ImlSmYpQ== | 2022-03-17 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application wxAocWULVDJon8F/2IWmEA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 03/17/2022 Application Dated: 03/17/2022 |
| Guangzhou Shikun Electronics Co., Ltd |
| NO.6 Liankun Road,Huangpu District, |
| Guangzhou, 510700 China |
| Attention: Bing Yi , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AR82-SKIWB821CU2 |
| Name of Grantee: | Guangzhou Shikun Electronics Co., Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IEEE 802.11a/b/g/n/ac 1T1R USB Wi-Fi Module Integrated Bluetooth 2.1+BR/ EDR/4.2 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.01433 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.01096 | ||
| 38 CC ND | 15E | 5500.0 - 5720.0 | 0.01153 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.01089 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application wxAocWULVDJon8F/2IWmEA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Guangzhou Shikun Electronics Co., Ltd NO.6 Liankun Road,Huangpu District, Guangzhou, 510700 China |
Date of Grant: 03/17/2022 Application Dated: 03/17/2022 |
| Attention: Bing Yi , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AR82-SKIWB821CU2 |
| Name of Grantee: | Guangzhou Shikun Electronics Co., Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IEEE 802.11a/b/g/n/ac 1T1R USB Wi-Fi Module Integrated Bluetooth 2.1+BR/ EDR/4.2 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.01433 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.01096 | ||
| 38 CC ND | 15E | 5500.0 - 5720.0 | 0.01153 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.01089 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 03/17/2022 Application Dated: 03/17/2022 |
| Guangzhou Shikun Electronics Co., Ltd |
| NO.6 Liankun Road,Huangpu District, |
| Guangzhou, 510700 China |
| Attention: Bing Yi , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AR82-SKIWB821CU2 |
| Name of Grantee: | Guangzhou Shikun Electronics Co., Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IEEE 802.11a/b/g/n/ac 1T1R USB Wi-Fi Module Integrated Bluetooth 2.1+BR/ EDR/4.2 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00535 |
| Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application rn91qZK+1v3edtFe8v/CWg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Guangzhou Shikun Electronics Co., Ltd NO.6 Liankun Road,Huangpu District, Guangzhou, 510700 China |
Date of Grant: 03/17/2022 Application Dated: 03/17/2022 |
| Attention: Bing Yi , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AR82-SKIWB821CU2 |
| Name of Grantee: | Guangzhou Shikun Electronics Co., Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IEEE 802.11a/b/g/n/ac 1T1R USB Wi-Fi Module Integrated Bluetooth 2.1+BR/ EDR/4.2 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00535 |
| Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 03/17/2022 Application Dated: 03/17/2022 |
| Guangzhou Shikun Electronics Co., Ltd |
| NO.6 Liankun Road,Huangpu District, |
| Guangzhou, 510700 China |
| Attention: Bing Yi , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AR82-SKIWB821CU2 |
| Name of Grantee: | Guangzhou Shikun Electronics Co., Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11a/b/g/n/ac 1T1R USB Wi-Fi Module Integrated Bluetooth 2.1+BR/ EDR/4.2 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00414 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.03963 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application BWiNJnc+xDyJi4ImlSmYpQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Guangzhou Shikun Electronics Co., Ltd NO.6 Liankun Road,Huangpu District, Guangzhou, 510700 China |
Date of Grant: 03/17/2022 Application Dated: 03/17/2022 |
| Attention: Bing Yi , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AR82-SKIWB821CU2 |
| Name of Grantee: | Guangzhou Shikun Electronics Co., Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11a/b/g/n/ac 1T1R USB Wi-Fi Module Integrated Bluetooth 2.1+BR/ EDR/4.2 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00414 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.03963 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |