FCC ID 2AR82-SKOW7601301
IEEE 802.11b/g/n 1T1R USB WiFi Module
by Guangzhou Shikun Electronics Co., Ltd
Grantee Code: 2AR82 Product Code: SKOW7601301
Latest application date: 2019-05-20
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2019-05-20 |
| 2412-2462 MHz | Original Equipment | 2019-04-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| user manual SKO.W7601.3-R1 | Users Manual | 2019-05-20 | PDF 511.4 KB |
| User Manual | Users Manual | 2019-04-03 | PDF 599.4 KB |
| Internal Photo | Internal Photos | 2019-05-20 | PDF 439.1 KB |
| Internal Photos | Internal Photos | 2019-04-03 | PDF 188 KB |
| External Photo | External Photos | 2019-05-20 | PDF 486.1 KB |
| External Photos | External Photos | 2019-04-03 | PDF 261.8 KB |
| Label and Label Location | ID Label/Location Info | 2019-04-03 | PDF 1.3 MB |
| Setup Photo | Test Setup Photos | 2019-05-20 | PDF 553.1 KB |
| Setup Photos | Test Setup Photos | 2019-04-03 | PDF 604.5 KB |
| 4788992194 -1_FCC ID&IC_ 2.4G WIFI Report | Test Report | 2019-05-20 | PDF 2.6 MB |
| Test Report | Test Report | 2019-04-03 | PDF 5.5 MB |
| C2PCletterforFCCapplication | Cover Letter(s) | 2019-05-20 | PDF 109.4 KB |
| FCC Agent Auth Letter | Cover Letter(s) | 2019-05-20 | PDF 919.4 KB |
| FCC confidential letter | Cover Letter(s) | 2019-05-20 | PDF 53 KB |
| Authorization Letter | Cover Letter(s) | 2019-04-03 | PDF 919.4 KB |
| Confidentiality Letter | Cover Letter(s) | 2019-04-03 | PDF 444 KB |
| Declaration Letter | Cover Letter(s) | 2019-04-03 | PDF 1,005.6 KB |
| 4788992194 -2_FCC MPE Report_2.4G WIFI | RF Exposure Info | 2019-05-20 | PDF 163.7 KB |
| RF Exposure Info | RF Exposure Info | 2019-04-03 | PDF 163.8 KB |
| Block Diagram Metadata only | Block Diagram | PDF 22.4 KB | |
| Circuit diagram Metadata only | Schematics | PDF 354.2 KB | |
| Schematics Metadata only | Schematics | PDF 544.3 KB | |
| Operation Description(revised) Metadata only | Operational Description | PDF 71.4 KB | |
| Operational Description Metadata only | Operational Description | PDF 71.2 KB |
Application Information
| Application ID | xzhVg8BnttTYXKwav8YBDg== |
|---|---|
| Final Action Date | 2019-05-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0028116184 |
| Model | SKOW7601301 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | IEEE 802.11b/g/n 1T1R USB WiFi Module |
| Responsible Party | Bing Yi, Certification Manager, yibing@cvte.com  , 13826160417 |
| Test Firm | Stephen Guo, UL Verification Services (Guangzhou) Co., Ltd., Stephen.guo@ul.com  , +86 0769 33817120 |
| TCB Email | LST.FRE.CertNotice@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class 2 Permissive Change to resistances positions changed and widened antenna feeder and power reduction as described in this filing. Modular Approval. Listed output power is peak conducted. This device supports 802.11b and 802.11g with 20MHz Bandwidth. This device also supports 802.11n with 20 MHz and 40 MHz bandwidth. This module may be installed only by the OEM or an OEM integrator. This transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| xzhVg8BnttTYXKwav8YBDg== | 2019-05-20 | Class II permissive change or modification of presently authorized equipment |
| 6B2jA2DQi5/rHlqDthCV9Q== | 2019-04-03 | Original Equipment |
Grants
TCB Grant - Application xzhVg8BnttTYXKwav8YBDg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 05/20/2019 Application Dated: 05/20/2019 |
| Guangzhou Shikun Electronics Co., Ltd |
| NO.6 Liankun Road,Huangpu District, |
| Guangzhou, 510700 China |
| Attention: Bing Yi , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AR82-SKOW7601301 |
| Name of Grantee: | Guangzhou Shikun Electronics Co., Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11b/g/n 1T1R USB WiFi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.171 | |||
| 15C | 2422.0 - 2452.0 | 0.175 |
| Class 2 Permissive Change to resistances positions changed and widened antenna feeder and power reduction as described in this filing. Modular Approval. Listed output power is peak conducted. This device supports 802.11b and 802.11g with 20MHz Bandwidth. This device also supports 802.11n with 20 MHz and 40 MHz bandwidth. This module may be installed only by the OEM or an OEM integrator. This transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. |
EAS Grant - Application xzhVg8BnttTYXKwav8YBDg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Guangzhou Shikun Electronics Co., Ltd NO.6 Liankun Road,Huangpu District, Guangzhou, 510700 China |
Date of Grant: 05/20/2019 Application Dated: 05/20/2019 |
| Attention: Bing Yi , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AR82-SKOW7601301 |
| Name of Grantee: | Guangzhou Shikun Electronics Co., Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11b/g/n 1T1R USB WiFi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.171 | |||
| 15C | 2422.0 - 2452.0 | 0.175 |
| Class 2 Permissive Change to resistances positions changed and widened antenna feeder and power reduction as described in this filing. Modular Approval. Listed output power is peak conducted. This device supports 802.11b and 802.11g with 20MHz Bandwidth. This device also supports 802.11n with 20 MHz and 40 MHz bandwidth. This module may be installed only by the OEM or an OEM integrator. This transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/03/2019 Application Dated: 04/03/2019 |
| Guangzhou Shikun Electronics Co., Ltd |
| NO.6 Liankun Road,Huangpu District, |
| Guangzhou, 510700 China |
| Attention: Bing Yi , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AR82-SKOW7601301 |
| Name of Grantee: | Guangzhou Shikun Electronics Co., Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11b/g/n 1T1R USB WiFi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.171 | |||
| 15C | 2422.0 - 2452.0 | 0.175 |
| Modular Approval. Listed output power is peak conducted. This device supports 802.11b and 802.11g with 20MHz Bandwidth. This device also supports 802.11n with 20 MHz and 40 MHz bandwidth. This module may be installed only by the OEM or an OEM integrator. This transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 6B2jA2DQi5/rHlqDthCV9Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Guangzhou Shikun Electronics Co., Ltd NO.6 Liankun Road,Huangpu District, Guangzhou, 510700 China |
Date of Grant: 04/03/2019 Application Dated: 04/03/2019 |
| Attention: Bing Yi , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AR82-SKOW7601301 |
| Name of Grantee: | Guangzhou Shikun Electronics Co., Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11b/g/n 1T1R USB WiFi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.171 | |||
| 15C | 2422.0 - 2452.0 | 0.175 |
| Modular Approval. Listed output power is peak conducted. This device supports 802.11b and 802.11g with 20MHz Bandwidth. This device also supports 802.11n with 20 MHz and 40 MHz bandwidth. This module may be installed only by the OEM or an OEM integrator. This transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |