FCC ID 2AR82-SKOWB921A21

IEEE 802.11b/g/n/a/ac/ax 2T2R USB WiFi Module Integrated BT 2.1+EDR/4.2/5.2

by Guangzhou Shikun Electronics Co., Ltd

Grantee Code: 2AR82   Product Code: SKOWB921A21
Latest application date: 2022-03-15

FCC ID Device Details

FCC ID2AR82-SKOWB921A21
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AR82
Product CodeSKOWB921A21
Applicant BusinessGuangzhou Shikun Electronics Co., Ltd 🇨🇳
Related Domains cvte.com
Equipment ClassIEEE 802.11b/g/n/a/ac/ax 2T2R USB WiFi Module Integrated BT 2.1+EDR/4.2/5.2
Test FirmUL Verification Services (Guangzhou) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2022-03-15
5180-5240 MHzOriginal Equipment2022-03-15
5955-6415 MHzOriginal Equipment2022-03-15
2402-2480 MHzOriginal Equipment2022-03-15

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2022-03-15PDF 2.7 MB
User ManualUsers Manual2022-03-15PDF 276.5 KB
User manualUsers Manual2022-03-15PDF 2.7 MB
User_manualUsers Manual2022-03-15PDF 276.5 KB
user manualUsers Manual2022-03-15PDF 2.7 MB
Int EUT PHOTOInternal Photos2022-03-15PDF 124.1 KB
Internal PhotosInternal Photos2022-03-15PDF 124.1 KB
Internal photosInternal Photos2022-03-15PDF 124.1 KB
Ext EUT PHOTOExternal Photos2022-03-15PDF 211 KB
External PhotoExternal Photos2022-03-15PDF 211 KB
External photosExternal Photos2022-03-15PDF 211 KB
LabelID Label/Location Info2022-03-15PDF 170.4 KB
Label and locationID Label/Location Info2022-03-15PDF 170.4 KB
Label_LocationID Label/Location Info2022-03-15PDF 170.4 KB
labelID Label/Location Info2022-03-15PDF 170.4 KB
Test Setup PhotosTest Setup Photos2022-03-15PDF 729.3 KB
Test setup photoTest Setup Photos2022-03-15PDF 729.3 KB
Test ReportTest Report2022-03-15PDF 5.4 MB
Test ReportTest Report2022-03-15PDF 5.5 MB
Test ReportTest Report2022-03-15PDF 4.6 MB
Test Report Metadata onlyTest Report2022-03-15PDF 5.5 MB
WIFI 6E Test Report_SKO.WB921A.2_part 1Test Report2022-03-15PDF 5.5 MB
WIFI 6E Test Report_SKO.WB921A.2_part 2Test Report2022-03-15PDF 5.5 MB
WIFI 6E Test Report_SKO.WB921A.2_part 3Test Report2022-03-15PDF 5.4 MB
WIFI 6E Test Report_SKO.WB921A.2_part 4Test Report2022-03-15PDF 5.4 MB
WIFI 6E Test Report_SKO.WB921A.2_part 5Test Report2022-03-15PDF 5.5 MB
WIFI 6E Test Report_SKO.WB921A.2_part 6Test Report2022-03-15PDF 5.4 MB
WIFI 6E Test Report_SKO.WB921A.2_part 7Test Report2022-03-15PDF 5.5 MB
WIFI 6E Test Report_SKO.WB921A.2_part 8Test Report2022-03-15PDF 5.5 MB
WIFI 6E Test Report_SKO.WB921A.2_part 9Test Report2022-03-15PDF 3.9 MB
Attestation Letter for Low Power Indoor Client Module ApprovalAttestation Statements2022-03-15PDF 291.5 KB
FCC Authority to Act as AgentCover Letter(s)2022-03-15PDF 257.2 KB
FCC Modular Approval Request Rev 3.0Cover Letter(s)2022-03-15PDF 71.9 KB
FCC Short & Long Term Confidentiality Request Rev4.1Cover Letter(s)2022-03-15PDF 62.8 KB
FCC Software Configuration Control DeclarationCover Letter(s)2022-03-15PDF 277.1 KB
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s)2022-03-15PDF 277.1 KB
FCC agent auth letterCover Letter(s)2022-03-15PDF 114.3 KB
RF ExposureRF Exposure Info2022-03-15PDF 216.8 KB
RF Exposure EvaluationRF Exposure Info2022-03-15PDF 216.8 KB
BlockDiagram Metadata onlyBlock DiagramPDF 443.8 KB
block diagram Metadata onlyBlock DiagramPDF 443.8 KB
SCH Metadata onlySchematicsPDF 566.8 KB
Schematic Metadata onlySchematicsPDF 566.8 KB
OP Metadata onlyOperational DescriptionPDF 193.4 KB
Operation Description Metadata onlyOperational DescriptionPDF 193.4 KB
FCC Software Security Requirements for UNII devices Metadata onlySDR Software/Security InfPDF 104.7 KB
FCC Software Security Requirements for UNII devices Rev 2.1 Metadata onlySDR Software/Security InfPDF 104.7 KB

Application Information

Application IDTcdiMDUbRPKIW4/Lxcf1xg==
Final Action Date2022-03-15
Application PurposeOriginal Equipment
Applicant FRN0028116184
ModelSKOWB921A21
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionIEEE 802.11b/g/n/a/ac/ax 2T2R USB WiFi Module Integrated BT 2.1+EDR/4.2/5.2
Responsible PartyBing Yi, Certification Manager, yibing@cvte.com , 13826160417
Technical ContactGuangzhou Shikun Electronics Co., Ltd, yibing@cvte.com
Test FirmStephen Guo, UL Verification Services (Guangzhou) Co., Ltd., Stephen.guo@ul.com , +86 0769 33817120
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsSingle Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
TcdiMDUbRPKIW4/Lxcf1xg==2022-03-15Original Equipment
ONtQLcdTTTVxw939A2nAgQ==2022-03-15Original Equipment
GCA+6UlAJSt2ZHWAkhC/2g==2022-03-15Original Equipment
51YZWaCqRQCwhfl5MVXQGQ==2022-03-15Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.006380015CCC
2402-2480 MHz0.0044615CCC
2412-2462 MHz0.0794315CCC, MO
5180-5240 MHz0.0944115E38, CC, MO
5260-5320 MHz0.087115E38, CC, MO, ND
5500-5720 MHz0.087115E38, CC, MO, ND
5745-5825 MHz0.112215E38, CC, MO
5955-6415 MHz0.0058615ECC, MO
6435-6515 MHz0.0054515ECC, MO
6535-6855 MHz0.0060515ECC, MO
6875-7115 MHz0.0053815ECC, MO

Grants

TCB Grant - Application TcdiMDUbRPKIW4/Lxcf1xg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 03/15/2022

Application Dated: 02/24/2022
Guangzhou Shikun Electronics Co., Ltd
NO.6 Liankun Road,Huangpu District,
Guangzhou, 510700
China
 
Attention: Bing Yi , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AR82-SKOWB921A21
Name of Grantee:  Guangzhou Shikun Electronics Co., Ltd
Equipment Class: Digital Transmission System
Notes: IEEE 802.11b/g/n/a/ac/ax 2T2R USB WiFi Module Integrated BT 2.1+EDR/4.2/5.2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00446  
CC MO 15C 2412.0  -  2462.0 0.07943  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application TcdiMDUbRPKIW4/Lxcf1xg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Guangzhou Shikun Electronics Co., Ltd
NO.6 Liankun Road,Huangpu District,
Guangzhou, 510700
China
  Date of Grant: 03/15/2022

Application Dated: 02/24/2022
 
Attention: Bing Yi , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AR82-SKOWB921A21
Name of Grantee:  Guangzhou Shikun Electronics Co., Ltd
Equipment Class: Digital Transmission System
Notes: IEEE 802.11b/g/n/a/ac/ax 2T2R USB WiFi Module Integrated BT 2.1+EDR/4.2/5.2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00446  
CC MO 15C 2412.0  -  2462.0 0.07943  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ONtQLcdTTTVxw939A2nAgQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 03/15/2022

Application Dated: 02/24/2022
Guangzhou Shikun Electronics Co., Ltd
NO.6 Liankun Road,Huangpu District,
Guangzhou, 510700
China
 
Attention: Bing Yi , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AR82-SKOWB921A21
Name of Grantee:  Guangzhou Shikun Electronics Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11b/g/n/a/ac/ax 2T2R USB WiFi Module Integrated BT 2.1+EDR/4.2/5.2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.09441  
38 CC MO ND 15E 5260.0  -  5320.0 0.0871  
38 CC MO ND 15E 5500.0  -  5720.0 0.0871  
38 CC MO 15E 5745.0  -  5825.0 0.1122  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application ONtQLcdTTTVxw939A2nAgQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Guangzhou Shikun Electronics Co., Ltd
NO.6 Liankun Road,Huangpu District,
Guangzhou, 510700
China
  Date of Grant: 03/15/2022

Application Dated: 02/24/2022
 
Attention: Bing Yi , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AR82-SKOWB921A21
Name of Grantee:  Guangzhou Shikun Electronics Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11b/g/n/a/ac/ax 2T2R USB WiFi Module Integrated BT 2.1+EDR/4.2/5.2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.09441  
38 CC MO ND 15E 5260.0  -  5320.0 0.0871  
38 CC MO ND 15E 5500.0  -  5720.0 0.0871  
38 CC MO 15E 5745.0  -  5825.0 0.1122  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application GCA+6UlAJSt2ZHWAkhC/2g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 03/15/2022

Application Dated: 02/24/2022
Guangzhou Shikun Electronics Co., Ltd
NO.6 Liankun Road,Huangpu District,
Guangzhou, 510700
China
 
Attention: Bing Yi , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AR82-SKOWB921A21
Name of Grantee:  Guangzhou Shikun Electronics Co., Ltd
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: IEEE 802.11b/g/n/a/ac/ax 2T2R USB WiFi Module Integrated BT 2.1+EDR/4.2/5.2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5955.0  -  6415.0 0.00586  
CC MO 15E 6435.0  -  6515.0 0.00545  
CC MO 15E 6535.0  -  6855.0 0.00605  
CC MO 15E 6875.0  -  7115.0 0.00538  

Single Modular Approval. Output power listed is EIRP. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application GCA+6UlAJSt2ZHWAkhC/2g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Guangzhou Shikun Electronics Co., Ltd
NO.6 Liankun Road,Huangpu District,
Guangzhou, 510700
China
  Date of Grant: 03/15/2022

Application Dated: 02/24/2022
 
Attention: Bing Yi , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AR82-SKOWB921A21
Name of Grantee:  Guangzhou Shikun Electronics Co., Ltd
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: IEEE 802.11b/g/n/a/ac/ax 2T2R USB WiFi Module Integrated BT 2.1+EDR/4.2/5.2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5955.0  -  6415.0 0.00586  
CC MO 15E 6435.0  -  6515.0 0.00545  
CC MO 15E 6535.0  -  6855.0 0.00605  
CC MO 15E 6875.0  -  7115.0 0.00538  

Single Modular Approval. Output power listed is EIRP. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 51YZWaCqRQCwhfl5MVXQGQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 03/15/2022

Application Dated: 02/24/2022
Guangzhou Shikun Electronics Co., Ltd
NO.6 Liankun Road,Huangpu District,
Guangzhou, 510700
China
 
Attention: Bing Yi , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AR82-SKOWB921A21
Name of Grantee:  Guangzhou Shikun Electronics Co., Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11b/g/n/a/ac/ax 2T2R USB WiFi Module Integrated BT 2.1+EDR/4.2/5.2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00638  

Single Modular Approval. Output power listed is conducted power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 51YZWaCqRQCwhfl5MVXQGQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Guangzhou Shikun Electronics Co., Ltd
NO.6 Liankun Road,Huangpu District,
Guangzhou, 510700
China
  Date of Grant: 03/15/2022

Application Dated: 02/24/2022
 
Attention: Bing Yi , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AR82-SKOWB921A21
Name of Grantee:  Guangzhou Shikun Electronics Co., Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11b/g/n/a/ac/ax 2T2R USB WiFi Module Integrated BT 2.1+EDR/4.2/5.2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00638  

Single Modular Approval. Output power listed is conducted power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: