FCC ID 2ARBSEL300530S
Wifi/BT Module
by Hewlett Packard Enterprise
Grantee Code: 2ARBS Product Code: EL300530S
Latest application date: 2019-02-12
FCC ID Device Details
| FCC ID | 2ARBSEL300530S |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ARBS |
| Product Code | EL300530S |
| Applicant Business | Hewlett Packard Enterprise 🇺🇸 |
| Related Domains |  hpe.com  mrt-cert.com |
| Equipment Class | Wifi/BT Module |
| Test Firm | MRT Technology (Taiwan) Co.,Ltd |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-02-12 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2019-02-12 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-02-12 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: A3LSIP005AFS30 Grant Date: 10/12/2016 | 2018-12-27 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: A3LSIP005AFS30 Grant Date: 10/12/2016 | 2018-12-27 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: A3LSIP005AFS30 Grant Date: 10/12/2016 | 2018-12-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2019-08-11 | PDF 3.7 MB |
| Internal Photos-1 | Internal Photos | 2019-08-11 | PDF 4.9 MB |
| Internal Photos-2 | Internal Photos | 2019-08-11 | PDF 3.6 MB |
| External Photos | External Photos | 2019-08-11 | PDF 1.3 MB |
| External Photos | External Photos | 2018-12-27 | PDF 160.4 KB |
| ID Label/Location Info | ID Label/Location Info | 2019-02-12 | PDF 380.5 KB |
| ID Label/Location Info | ID Label/Location Info | 2018-12-27 | PDF 55.4 KB |
| Test Setup Photos | Test Setup Photos | 2019-08-11 | PDF 555.9 KB |
| Test Report | Test Report | 2019-02-12 | PDF 4.6 MB |
| Test Report | Test Report | 2019-02-12 | PDF 1.6 MB |
| Test Report_LTE | Test Report | 2019-02-12 | PDF 1.5 MB |
| Test Report_WLAN | Test Report | 2019-02-12 | PDF 2 MB |
| Class II permissive change letter | Cover Letter(s) | 2019-02-12 | PDF 58.7 KB |
| Confidentiality | Cover Letter(s) | 2019-02-12 | PDF 57.8 KB |
| Declaration of authorization | Cover Letter(s) | 2019-02-12 | PDF 32.3 KB |
| Declaration of authorization-2ARBSEL300530S | Cover Letter(s) | 2018-12-27 | PDF 28.6 KB |
| FCC ID change letter-2ARBSEL300530S | Cover Letter(s) | 2018-12-27 | PDF 215.6 KB |
| No change letter-FCC Samsung | Cover Letter(s) | 2018-12-27 | PDF 37.1 KB |
| MPE | RF Exposure Info | 2019-02-12 | PDF 380.5 KB |
| Block Diagram Metadata only | Block Diagram | PDF 581.6 KB | |
| Schematics Metadata only | Schematics | PDF 158 KB |
Application Information
| Application ID | iuyNwB6dkw3Lj4+QqGjpNg== |
|---|---|
| Final Action Date | 2019-02-12 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0027862663 |
| Model | EL300530S |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Wifi/BT Module |
| Responsible Party | you hing yap, yap@hpe.com , 281 2044283 |
| Agent | Chenz Chenz Chenz, MRT Technology (Taiwan) Co., Ltd, chenzker@mrt-cert.com , 886-3-3288388 |
| Technical Contact | Chenz Ker, MRT Technology (Taiwan) Co., Ltd, chenzker@mrt-cert.com , 886-3-3288388 |
| Non-Technical Contact | Chenz Ker, MRT Technology (Taiwan) Co., Ltd, chenzker@mrt-cert.com , 886-3-3288388 |
| Test Firm | Chenz Ker, MRT Technology (Taiwan) Co.,Ltd, chenzker@mrt-cert.com , +886-3-328-8388 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 08/11/2019 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | This Class II Permissive Change incorporates previously certified module into the host: HPE EL300 Converged Edge System, Brand: HPE, Product: HSTNS-2162. The changes also include change the antenna type with a higher antenna gain. Limited Single Modular Approval. Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antennas must not be accessible to the end-user. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| iuyNwB6dkw3Lj4+QqGjpNg== | 2019-02-12 | Class II permissive change or modification of presently authorized equipment |
| gru1GCG70n/DOrs0sBIVRw== | 2019-02-12 | Class II permissive change or modification of presently authorized equipment |
| 42qs8X/LBIVpBYsajEXi5A== | 2019-02-12 | Class II permissive change or modification of presently authorized equipment |
| zV/5tfOubR94Iaaa0mJhEA== | 2018-12-27 | Change in identification of presently authorized equipment. Original FCC ID: A3LSIP005AFS30 Grant Date: 10/12/2016 |
| fBUIUoYrtp3iAeDMMPc4kg== | 2018-12-27 | Change in identification of presently authorized equipment. Original FCC ID: A3LSIP005AFS30 Grant Date: 10/12/2016 |
| YEmKeKuzboBt6IRaC9YOEQ== | 2018-12-27 | Change in identification of presently authorized equipment. Original FCC ID: A3LSIP005AFS30 Grant Date: 10/12/2016 |
Equipment Authorization
Grants
TCB Grant - Application zV/5tfOubR94Iaaa0mJhEA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 12/27/2018 Application Dated: 12/24/2018 |
| Hewlett Packard Enterprise |
| 11445 Compaq Center Dr W |
| Houston, TX 77070 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL300530S |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wifi/BT Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0206 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.0221 | ||
| 38 CC | 15E | 5500.0 - 5720.0 | 0.0222 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.01 |
| Change in identification of presently authorized equipment : Original FCC ID: A3LSIP005AFS30, Grant Date: 10/12/2016. Limited Single Modular Approval. Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antennas must not be accessible to the end-user. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, and 40 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application zV/5tfOubR94Iaaa0mJhEA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 11445 Compaq Center Dr W Houston, TX 77070 United States |
Date of Grant: 12/27/2018 Application Dated: 12/24/2018 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL300530S |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wifi/BT Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0206 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.0221 | ||
| 38 CC | 15E | 5500.0 - 5720.0 | 0.0222 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.01 |
| Change in identification of presently authorized equipment : Original FCC ID: A3LSIP005AFS30, Grant Date: 10/12/2016. Limited Single Modular Approval. Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antennas must not be accessible to the end-user. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, and 40 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 12/27/2018 Application Dated: 12/24/2018 |
| Hewlett Packard Enterprise |
| 11445 Compaq Center Dr W |
| Houston, TX 77070 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL300530S |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wifi/BT Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 |
| Change in identification of presently authorized equipment : Original FCC ID: A3LSIP005AFS30, Grant Date: 10/12/2016. Limited Single Modular Approval. Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antennas must not be accessible to the end-user. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application YEmKeKuzboBt6IRaC9YOEQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 11445 Compaq Center Dr W Houston, TX 77070 United States |
Date of Grant: 12/27/2018 Application Dated: 12/24/2018 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL300530S |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wifi/BT Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 |
| Change in identification of presently authorized equipment : Original FCC ID: A3LSIP005AFS30, Grant Date: 10/12/2016. Limited Single Modular Approval. Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antennas must not be accessible to the end-user. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/12/2019 Application Dated: 02/11/2019 |
| Hewlett Packard Enterprise |
| 11445 Compaq Center Dr W |
| Houston, TX 77070 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL300530S |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wifi/BT Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 |
| This Class II Permissive Change incorporates previously certified module into the host: HPE EL300 Converged Edge System, Brand: HPE, Product: HSTNS-2162. The changes also include change the antenna type with a higher antenna gain. Limited Single Modular Approval. Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antennas must not be accessible to the end-user. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application iuyNwB6dkw3Lj4+QqGjpNg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 11445 Compaq Center Dr W Houston, TX 77070 United States |
Date of Grant: 02/12/2019 Application Dated: 02/11/2019 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL300530S |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wifi/BT Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 |
| This Class II Permissive Change incorporates previously certified module into the host: HPE EL300 Converged Edge System, Brand: HPE, Product: HSTNS-2162. The changes also include change the antenna type with a higher antenna gain. Limited Single Modular Approval. Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antennas must not be accessible to the end-user. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/12/2019 Application Dated: 02/11/2019 |
| Hewlett Packard Enterprise |
| 11445 Compaq Center Dr W |
| Houston, TX 77070 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL300530S |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wifi/BT Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0206 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.0221 | ||
| 38 CC | 15E | 5500.0 - 5720.0 | 0.0222 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.01 |
| This Class II Permissive Change incorporates previously certified module into the host: HPE EL300 Converged Edge System, Brand: HPE, Product: HSTNS-2162. The changes also include change the antenna type with a higher antenna gain. Limited Single Modular Approval. Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antennas must not be accessible to the end-user. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, and 40 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application gru1GCG70n/DOrs0sBIVRw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 11445 Compaq Center Dr W Houston, TX 77070 United States |
Date of Grant: 02/12/2019 Application Dated: 02/11/2019 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL300530S |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wifi/BT Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0206 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.0221 | ||
| 38 CC | 15E | 5500.0 - 5720.0 | 0.0222 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.01 |
| This Class II Permissive Change incorporates previously certified module into the host: HPE EL300 Converged Edge System, Brand: HPE, Product: HSTNS-2162. The changes also include change the antenna type with a higher antenna gain. Limited Single Modular Approval. Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antennas must not be accessible to the end-user. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, and 40 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 12/27/2018 Application Dated: 12/24/2018 |
| Hewlett Packard Enterprise |
| 11445 Compaq Center Dr W |
| Houston, TX 77070 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL300530S |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | Wifi/BT Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2405.0 - 2475.0 | 0.0412 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0308 |
| Change in identification of presently authorized equipment : Original FCC ID: A3LSIP005AFS30, Grant Date: 10/12/2016. Limited Single Modular Approval. Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antennas must not be accessible to the end-user. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application fBUIUoYrtp3iAeDMMPc4kg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 11445 Compaq Center Dr W Houston, TX 77070 United States |
Date of Grant: 12/27/2018 Application Dated: 12/24/2018 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL300530S |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | Wifi/BT Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2405.0 - 2475.0 | 0.0412 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0308 |
| Change in identification of presently authorized equipment : Original FCC ID: A3LSIP005AFS30, Grant Date: 10/12/2016. Limited Single Modular Approval. Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antennas must not be accessible to the end-user. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/12/2019 Application Dated: 02/11/2019 |
| Hewlett Packard Enterprise |
| 11445 Compaq Center Dr W |
| Houston, TX 77070 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL300530S |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | Wifi/BT Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0308 |
| This Class II Permissive Change incorporates previously certified module into the host: HPE EL300 Converged Edge System, Brand: HPE, Product: HSTNS-2162. The changes also include change the antenna type with a higher antenna gain, also disable the modulation as described in the filing. Limited Single Modular Approval. Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antennas must not be accessible to the end-user. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 42qs8X/LBIVpBYsajEXi5A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 11445 Compaq Center Dr W Houston, TX 77070 United States |
Date of Grant: 02/12/2019 Application Dated: 02/11/2019 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL300530S |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | Wifi/BT Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0308 |
| This Class II Permissive Change incorporates previously certified module into the host: HPE EL300 Converged Edge System, Brand: HPE, Product: HSTNS-2162. The changes also include change the antenna type with a higher antenna gain, also disable the modulation as described in the filing. Limited Single Modular Approval. Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antennas must not be accessible to the end-user. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |