FCC ID 2ARBSEL3009260
Wifi/BT Module
by Hewlett Packard Enterprise
Grantee Code: 2ARBS Product Code: EL3009260
Latest application date: 2019-03-07
FCC ID Device Details
| FCC ID | 2ARBSEL3009260 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ARBS |
| Product Code | EL3009260 |
| Applicant Business | Hewlett Packard Enterprise 🇺🇸 |
| Related Domains |  hpe.com  mrt-cert.com |
| Equipment Class | Wifi/BT Module |
| Test Firm | MRT Technology (Taiwan) Co.,Ltd |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2019-03-07 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-03-07 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-03-07 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017 | 2018-12-19 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017 | 2018-12-19 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017 | 2018-12-19 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2019-09-01 | PDF 3.9 MB |
| EL300_9260NGW- ISED UserMan | Users Manual | 2018-12-19 | PDF 1.1 MB |
| Internal Photos-1 | Internal Photos | 2019-09-01 | PDF 4.9 MB |
| Internal Photos-2 | Internal Photos | 2019-09-01 | PDF 3.6 MB |
| External Photos | External Photos | 2019-09-01 | PDF 1.3 MB |
| External photo | External Photos | 2019-09-01 | PDF 1.3 MB |
| EL300_9260NGW- Expho | External Photos | 2018-12-19 | PDF 238.2 KB |
| ID Label/Location Info | ID Label/Location Info | 2019-03-07 | PDF 380.9 KB |
| EL300_9260NGW- ISED Label | ID Label/Location Info | 2018-12-19 | PDF 138.5 KB |
| EL300_9260NGW- ISED UserMan | ID Label/Location Info | 2018-12-19 | PDF 1.1 MB |
| Test Setup Photos_NII | Test Setup Photos | 2019-09-01 | PDF 675.2 KB |
| DTS Test Report_BLE | Test Report | 2019-03-07 | PDF 1.5 MB |
| DTS Test Report_WIFI | Test Report | 2019-03-07 | PDF 4.5 MB |
| Test Report_DSS | Test Report | 2019-03-07 | PDF 1.6 MB |
| Test Report_NII-1 | Test Report | 2019-03-07 | PDF 2.6 MB |
| Test Report_NII-2 | Test Report | 2019-03-07 | PDF 2.8 MB |
| Test Report_NII-3 | Test Report | 2019-03-07 | PDF 1.9 MB |
| EL300_9260NGW- ATTESTATION | Cover Letter(s) | 2018-12-19 | PDF 23.2 KB |
| C2PC letter C2PC | Cover Letter(s) | 2019-03-07 | PDF 57.9 KB |
| Declaration of authorization | Cover Letter(s) | 2019-03-07 | PDF 31.9 KB |
| confidentiality | Cover Letter(s) | 2019-03-07 | PDF 58.5 KB |
| EL300_9260NGW- Auth Ltr for Change of ID | Cover Letter(s) | 2018-12-19 | PDF 80.9 KB |
| EL300_9260NGW- Declaration letter for electrically identical | Cover Letter(s) | 2018-12-19 | PDF 34.5 KB |
| EL300_9260NGW- Declaration of authorization | Cover Letter(s) | 2018-12-19 | PDF 179.3 KB |
| MPE Report | RF Exposure Info | 2019-03-07 | PDF 379.1 KB |
| Block Diagram Metadata only | Block Diagram | PDF 581.6 KB | |
| Schematics Metadata only | Schematics | PDF 158 KB |
Application Information
| Application ID | fEItVwMB0GxyT5157qFU+Q== |
|---|---|
| Final Action Date | 2019-03-07 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0027862663 |
| Model | EL3009260 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Wifi/BT Module |
| Responsible Party | you hing yap, yap@hpe.com , 281 2044283 |
| Agent | Chenz Chenz Chenz, MRT Technology (Taiwan) Co. Ltd, chenzker@mrt-cert.com , 886-3-3288388 |
| Technical Contact | Chenz Ker, MRT Technology (Taiwan) Co., Ltd, chenzker@mrt-cert.com , 886-3-3288388 |
| Non-Technical Contact | Chenz Ker, MRT Technology (Taiwan) Co., Ltd, chenzker@mrt-cert.com , 886-3-3288388 |
| Test Firm | Chenz Ker, MRT Technology (Taiwan) Co.,Ltd, chenzker@mrt-cert.com , +886-3-328-8388 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 09/01/2019 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | This Class II Permissive Change incorporates previously certified module into the host: HPE EL300 Converged Edge System, Brand: HPE, Product: HSTNS-2162. The changes also include change the antenna type with a higher antenna gain and reduce power on WIFI 2.4GHz and 5GHz by software. Power output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements accordingly to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz, and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| fEItVwMB0GxyT5157qFU+Q== | 2019-03-07 | Class II permissive change or modification of presently authorized equipment |
| RLgV3sEqqsAxVzK6uJmhLQ== | 2019-03-07 | Class II permissive change or modification of presently authorized equipment |
| 8wyEP+NCWoLk+5FPMbg9jw== | 2019-03-07 | Class II permissive change or modification of presently authorized equipment |
| qglP7gEVzN0v0lm3ZjeZVQ== | 2018-12-19 | Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017 |
| JeOnjrvUEEyz94ShlXiGvw== | 2018-12-19 | Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017 |
| IIMnYkiXuLkSmbXm2TPIuw== | 2018-12-19 | Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017 |
| 2zxAs41bEt2bNTpoQbbA9Q== | 2018-12-19 | Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 15B | CC | ||
| 2402-2480 MHz | 0.0140000 | 15C | CC |
| 2402-2480 MHz | 0.01 | 15C | CC |
| 2412-2472 MHz | 0.984 | 15C | CC, MO |
| 2422-2462 MHz | 0.43 | 15C | CC, MO |
| 5190-5230 MHz | 0.134 | 15E | CC, MO |
| 5210 MHz | 0.062 | 15E | CC, MO |
| 5260-5320 MHz | 0.229 | 15E | CC, MO, ND |
| 5270-5310 MHz | 0.11 | 15E | CC, MO, ND |
| 5290 MHz | 0.052 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.198 | 15E | CC, MO, ND |
| 5510-5670 MHz | 0.221 | 15E | CC, MO, ND |
| 5530-5690 MHz | 0.232 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.299 | 15E | CC, MO |
| 5755-5795 MHz | 0.198 | 15E | CC, MO |
| 5775 MHz | 0.148 | 15E | CC, MO |
Grants
TCB Grant - Application RLgV3sEqqsAxVzK6uJmhLQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 03/07/2019 Application Dated: 03/04/2019 |
| Hewlett Packard Enterprise |
| 11445 Compaq Center Dr W |
| Houston, TX 77070 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL3009260 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wifi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| This Class II Permissive Change incorporates previously certified module into the host: HPE EL300 Converged Edge System, Brand: HPE, Product: HSTNS-2162. The changes also include change the antenna type with a higher antenna gain. Power output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application RLgV3sEqqsAxVzK6uJmhLQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 11445 Compaq Center Dr W Houston, TX 77070 United States |
Date of Grant: 03/07/2019 Application Dated: 03/04/2019 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL3009260 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wifi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| This Class II Permissive Change incorporates previously certified module into the host: HPE EL300 Converged Edge System, Brand: HPE, Product: HSTNS-2162. The changes also include change the antenna type with a higher antenna gain. Power output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/19/2018 Application Dated: 12/19/2018 |
| Hewlett Packard Enterprise |
| 11445 Compaq Center Dr W |
| Houston, TX 77070 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL3009260 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wifi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.191 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.134 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.062 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.229 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.11 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.052 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.198 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.221 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.232 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.299 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.198 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.148 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application qglP7gEVzN0v0lm3ZjeZVQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 11445 Compaq Center Dr W Houston, TX 77070 United States |
Date of Grant: 12/19/2018 Application Dated: 12/19/2018 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL3009260 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wifi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.191 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.134 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.062 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.229 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.11 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.052 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.198 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.221 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.232 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.299 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.198 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.148 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/19/2018 Application Dated: 12/19/2018 |
| Hewlett Packard Enterprise |
| 11445 Compaq Center Dr W |
| Houston, TX 77070 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL3009260 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Wifi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application JeOnjrvUEEyz94ShlXiGvw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 11445 Compaq Center Dr W Houston, TX 77070 United States |
Date of Grant: 12/19/2018 Application Dated: 12/19/2018 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL3009260 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Wifi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/19/2018 Application Dated: 12/19/2018 |
| Hewlett Packard Enterprise |
| 11445 Compaq Center Dr W |
| Houston, TX 77070 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL3009260 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | Wifi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.984 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.43 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application IIMnYkiXuLkSmbXm2TPIuw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 11445 Compaq Center Dr W Houston, TX 77070 United States |
Date of Grant: 12/19/2018 Application Dated: 12/19/2018 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL3009260 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | Wifi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.984 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.43 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 03/07/2019 Application Dated: 03/04/2019 |
| Hewlett Packard Enterprise |
| 11445 Compaq Center Dr W |
| Houston, TX 77070 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL3009260 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wifi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.191 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.134 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.062 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.229 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.11 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.052 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.198 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.221 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.232 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.299 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.198 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.148 |
| This Class II Permissive Change incorporates previously certified module into the host: HPE EL300 Converged Edge System, Brand: HPE, Product: HSTNS-2162. The changes also include change the antenna type with a higher antenna gain and reduce power on WIFI 2.4GHz and 5GHz by software. Power output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements accordingly to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz, and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application fEItVwMB0GxyT5157qFU+Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 11445 Compaq Center Dr W Houston, TX 77070 United States |
Date of Grant: 03/07/2019 Application Dated: 03/04/2019 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL3009260 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wifi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.191 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.134 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.062 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.229 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.11 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.052 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.198 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.221 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.232 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.299 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.198 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.148 |
| This Class II Permissive Change incorporates previously certified module into the host: HPE EL300 Converged Edge System, Brand: HPE, Product: HSTNS-2162. The changes also include change the antenna type with a higher antenna gain and reduce power on WIFI 2.4GHz and 5GHz by software. Power output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements accordingly to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz, and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 03/07/2019 Application Dated: 03/04/2019 |
| Hewlett Packard Enterprise |
| 11445 Compaq Center Dr W |
| Houston, TX 77070 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL3009260 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | Wifi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.984 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.43 |
| This Class II Permissive Change incorporates previously certified module into the host: HPE EL300 Converged Edge System, Brand: HPE, Product: HSTNS-2162. The changes also include change the antenna type with a higher antenna gain and reduce power on WIFI 2.4GHz and 5GHz by software. Power output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements accordingly to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 8wyEP+NCWoLk+5FPMbg9jw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 11445 Compaq Center Dr W Houston, TX 77070 United States |
Date of Grant: 03/07/2019 Application Dated: 03/04/2019 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL3009260 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Digital Transmission System |
| Notes: | Wifi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.984 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.43 |
| This Class II Permissive Change incorporates previously certified module into the host: HPE EL300 Converged Edge System, Brand: HPE, Product: HSTNS-2162. The changes also include change the antenna type with a higher antenna gain and reduce power on WIFI 2.4GHz and 5GHz by software. Power output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements accordingly to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/19/2018 Application Dated: 12/19/2018 |
| Hewlett Packard Enterprise |
| 11445 Compaq Center Dr W |
| Houston, TX 77070 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL3009260 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wifi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 2zxAs41bEt2bNTpoQbbA9Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hewlett Packard Enterprise 11445 Compaq Center Dr W Houston, TX 77070 United States |
Date of Grant: 12/19/2018 Application Dated: 12/19/2018 |
| Attention: you hing yap |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARBSEL3009260 |
| Name of Grantee: | Hewlett Packard Enterprise |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wifi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |