FCC ID 2ARGS-P3310

FCC ID	2ARGS-P3310
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	2ARGS
Product Code	P3310
Applicant Business	Oxford Nanopore Technologies plc 🇬🇧
Related Domains	nanoporetech.com
Equipment Class	WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth
Test Firm	UL LLC

Frequency Range	Application Purpose	Final Action Date
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2020-10-28
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2020-10-28
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2020-10-28
2402-2480 MHz	Change in identification of presently authorized equipment. Original FCC ID: VOB-P3310 Grant Date: 01/19/2017	2020-10-22
5180-5240 MHz	Change in identification of presently authorized equipment. Original FCC ID: VOB-P3310 Grant Date: 01/19/2017	2020-10-22
2402-2480 MHz	Change in identification of presently authorized equipment. Original FCC ID: VOB-P3310 Grant Date: 01/19/2017	2020-10-22

Document	Type	Available	File
External Photo	External Photos	2020-10-22	PDF 123 KB
Label Info	ID Label/Location Info	2020-10-22	PDF 1.8 MB
BT Test Set Up	Test Setup Photos	2020-10-28	PDF 2.1 MB
NII Test Set Up	Test Setup Photos	2020-10-28	PDF 3.7 MB
WLAN Test Set Up	Test Setup Photos	2020-10-28	PDF 3.7 MB
BTLE Test Report	Test Report	2020-10-28	PDF 1.1 MB
DSS Test Report	Test Report	2020-10-28	PDF 1.5 MB
NII Test Report Part 1	Test Report	2020-10-28	PDF 3.5 MB
NII Test Report Part 2	Test Report	2020-10-28	PDF 3.7 MB
NII Test Report Part 3	Test Report	2020-10-28	PDF 439.4 KB
WLAN Test Report	Test Report	2020-10-28	PDF 4.1 MB
Authorisation Letter	Cover Letter(s)	2020-10-28	PDF 30.3 KB
Permissive Change Request	Cover Letter(s)	2020-10-28	PDF 54.2 KB
New Equipment Certification Holder Letter	Cover Letter(s)	2020-10-22	PDF 39.1 KB
Original Equipment Certification Holder Letter	Cover Letter(s)	2020-10-22	PDF 202.5 KB
MPE Calculation	RF Exposure Info	2020-10-28	PDF 87.7 KB

Application ID	rV9sgqaflj1gjJjl245anw==
Final Action Date	2020-10-28
Application Purpose	Class II permissive change or modification of presently authorized equipment
Applicant FRN	0027912609
Model	P3310
Frequency Range	2402-2480 MHz
Equipment Class	DTS - Digital Transmission System
Device Description	WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth
Responsible Party	Will Craddock, Director, Production Engineering, will.craddock@nanoporetech.com , +44 (0) 845 034 7900
Technical Contact	Gavin Lofts, Oxford Nanopore Technologies Limited, gavin.lofts@nanoporetech.com , +44 7887 475290
Non-Technical Contact	Will Craddock, Oxford Nanopore Technologies Limited, will.craddock@nanoporetech.com , +441865504976
Test Firm	Rick Titus, UL LLC, rick.a.titus@ul.com , 847-272-8800
TCB Email	certification@ul.com
TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term Confidentiality	No
Long-Term Confidentiality	No
Grant Deferral	No
Modular Equipment	Single Modular Approval
Composite Device	Yes
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	Power output listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20 MHz bandwidth. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. Permissive change to add alternative antenna type.

Application ID	Date	Purpose
rV9sgqaflj1gjJjl245anw==	2020-10-28	Class II permissive change or modification of presently authorized equipment
jquAHPyZ/rNSKPuhU7PgxA==	2020-10-28	Class II permissive change or modification of presently authorized equipment
Wt91sYLYVNTN5Ejn5D9Scw==	2020-10-28	Class II permissive change or modification of presently authorized equipment
egn9KfzHugxPwFu4/9VK3w==	2020-10-22	Change in identification of presently authorized equipment. Original FCC ID: VOB-P3310 Grant Date: 01/19/2017
PKDssqExFUxIFPdBCOhGAg==	2020-10-22	Change in identification of presently authorized equipment. Original FCC ID: VOB-P3310 Grant Date: 01/19/2017
ECTklBms5J2cL/Iu8aPDoA==	2020-10-22	Change in identification of presently authorized equipment. Original FCC ID: VOB-P3310 Grant Date: 01/19/2017

Frequency	Output	Rules	Grant Notes
2402-2480 MHz	0.0034	15C	CC
2402-2480 MHz	0.0073000	15C	CC
2412-2472 MHz	0.0698	15C	CC, MO
5180-5240 MHz	0.0399	15E	38, CC, MO
5180-5240 MHz	0.0399	15E	CC, MO
5260-5320 MHz	0.0832	15E	38, CC, MO, ND
5260-5320 MHz	0.0832	15E	CC, MO, ND
5500-5700 MHz	0.0853	15E	38, CC, MO, ND
5500-5700 MHz	0.0853	15E	CC, MO, ND
5745-5825 MHz	0.0834	15E	38, CC, MO
5745-5825 MHz	0.0834	15E	CC, MO

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL International (UK) Ltd
Unit 1 - 3 Horizon Kingsland Business Park Wade Road
Basingstoke, RG24 8AH
United Kingdom

Date of Grant: 10/28/2020

Application Dated: 10/28/2020

Oxford Nanopore Technologies plc

Gosling Building, Oxford Science Park,

Oxford, OX4 4DQ
United Kingdom

Attention: Will Craddock , Director, Production Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ARGS-P3310

Name of Grantee:	Oxford Nanopore Technologies plc

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0073

Power output listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. Permissive change to add alternative antenna type.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Oxford Nanopore Technologies plc
Gosling Building, Oxford Science Park,
Oxford, OX4 4DQ
United Kingdom

Date of Grant: 10/28/2020

Application Dated: 10/28/2020

Attention: Will Craddock , Director, Production Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ARGS-P3310

Name of Grantee:	Oxford Nanopore Technologies plc

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0073

Power output listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. Permissive change to add alternative antenna type.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application rV9sgqaflj1gjJjl245anw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL International (UK) Ltd
Unit 1 - 3 Horizon Kingsland Business Park Wade Road
Basingstoke, RG24 8AH
United Kingdom

Date of Grant: 10/28/2020

Application Dated: 10/28/2020

Oxford Nanopore Technologies plc

Gosling Building, Oxford Science Park,

Oxford, OX4 4DQ
United Kingdom

Attention: Will Craddock , Director, Production Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ARGS-P3310

Name of Grantee:	Oxford Nanopore Technologies plc

Equipment Class:	Digital Transmission System
Notes:	WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0034
CC MO	15C	2412.0 - 2472.0	0.0698

Power output listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20 MHz bandwidth. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. Permissive change to add alternative antenna type.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Oxford Nanopore Technologies plc
Gosling Building, Oxford Science Park,
Oxford, OX4 4DQ
United Kingdom

Date of Grant: 10/28/2020

Application Dated: 10/28/2020

Attention: Will Craddock , Director, Production Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ARGS-P3310

Name of Grantee:	Oxford Nanopore Technologies plc

Equipment Class:	Digital Transmission System
Notes:	WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0034
CC MO	15C	2412.0 - 2472.0	0.0698

Power output listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20 MHz bandwidth. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. Permissive change to add alternative antenna type.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application PKDssqExFUxIFPdBCOhGAg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL International (UK) Ltd
Unit 1 - 3 Horizon Kingsland Business Park Wade Road
Basingstoke, RG24 8AH
United Kingdom

Date of Grant: 10/22/2020

Application Dated: 10/22/2020

Oxford Nanopore Technologies plc

Gosling Building, Oxford Science Park,

Oxford, OX4 4DQ
United Kingdom

Attention: Will Craddock , Director, Production Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ARGS-P3310

Name of Grantee:	Oxford Nanopore Technologies plc

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.0399
CC MO ND	15E	5260.0 - 5320.0	0.0832
CC MO ND	15E	5500.0 - 5700.0	0.0853
CC MO	15E	5745.0 - 5825.0	0.0834

Output power listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20, 40, and 80 MHz bandwidths. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Oxford Nanopore Technologies plc
Gosling Building, Oxford Science Park,
Oxford, OX4 4DQ
United Kingdom

Date of Grant: 10/22/2020

Application Dated: 10/22/2020

Attention: Will Craddock , Director, Production Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ARGS-P3310

Name of Grantee:	Oxford Nanopore Technologies plc

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.0399
CC MO ND	15E	5260.0 - 5320.0	0.0832
CC MO ND	15E	5500.0 - 5700.0	0.0853
CC MO	15E	5745.0 - 5825.0	0.0834

Output power listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20, 40, and 80 MHz bandwidths. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application jquAHPyZ/rNSKPuhU7PgxA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL International (UK) Ltd
Unit 1 - 3 Horizon Kingsland Business Park Wade Road
Basingstoke, RG24 8AH
United Kingdom

Date of Grant: 10/28/2020

Application Dated: 10/28/2020

Oxford Nanopore Technologies plc

Gosling Building, Oxford Science Park,

Oxford, OX4 4DQ
United Kingdom

Attention: Will Craddock , Director, Production Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ARGS-P3310

Name of Grantee:	Oxford Nanopore Technologies plc

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0 - 5240.0	0.0399
38 CC MO ND	15E	5260.0 - 5320.0	0.0832
38 CC MO ND	15E	5500.0 - 5700.0	0.0853
38 CC MO	15E	5745.0 - 5825.0	0.0834

Output power listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20, 40, and 80 MHz bandwidths. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. Permissive change to add alternative antenna type.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Oxford Nanopore Technologies plc
Gosling Building, Oxford Science Park,
Oxford, OX4 4DQ
United Kingdom

Date of Grant: 10/28/2020

Application Dated: 10/28/2020

Attention: Will Craddock , Director, Production Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ARGS-P3310

Name of Grantee:	Oxford Nanopore Technologies plc

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0 - 5240.0	0.0399
38 CC MO ND	15E	5260.0 - 5320.0	0.0832
38 CC MO ND	15E	5500.0 - 5700.0	0.0853
38 CC MO	15E	5745.0 - 5825.0	0.0834

Output power listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20, 40, and 80 MHz bandwidths. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. Permissive change to add alternative antenna type.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application egn9KfzHugxPwFu4/9VK3w==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL International (UK) Ltd
Unit 1 - 3 Horizon Kingsland Business Park Wade Road
Basingstoke, RG24 8AH
United Kingdom

Date of Grant: 10/22/2020

Application Dated: 10/22/2020

Oxford Nanopore Technologies plc

Gosling Building, Oxford Science Park,

Oxford, OX4 4DQ
United Kingdom

Attention: Will Craddock , Director, Production Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ARGS-P3310

Name of Grantee:	Oxford Nanopore Technologies plc

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0073

Power output listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Oxford Nanopore Technologies plc
Gosling Building, Oxford Science Park,
Oxford, OX4 4DQ
United Kingdom

Date of Grant: 10/22/2020

Application Dated: 10/22/2020

Attention: Will Craddock , Director, Production Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ARGS-P3310

Name of Grantee:	Oxford Nanopore Technologies plc

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0073

Power output listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application ECTklBms5J2cL/Iu8aPDoA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL International (UK) Ltd
Unit 1 - 3 Horizon Kingsland Business Park Wade Road
Basingstoke, RG24 8AH
United Kingdom

Date of Grant: 10/22/2020

Application Dated: 10/22/2020

Oxford Nanopore Technologies plc

Gosling Building, Oxford Science Park,

Oxford, OX4 4DQ
United Kingdom

Attention: Will Craddock , Director, Production Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ARGS-P3310

Name of Grantee:	Oxford Nanopore Technologies plc

Equipment Class:	Digital Transmission System
Notes:	WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0034
CC MO	15C	2412.0 - 2472.0	0.0698

Power output listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20 MHz bandwidth. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Oxford Nanopore Technologies plc
Gosling Building, Oxford Science Park,
Oxford, OX4 4DQ
United Kingdom

Date of Grant: 10/22/2020

Application Dated: 10/22/2020

Attention: Will Craddock , Director, Production Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ARGS-P3310

Name of Grantee:	Oxford Nanopore Technologies plc

Equipment Class:	Digital Transmission System
Notes:	WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0034
CC MO	15C	2412.0 - 2472.0	0.0698

Power output listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20 MHz bandwidth. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:

WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth

by Oxford Nanopore Technologies plc

Grantee Code: 2ARGS Product Code: P3310

Latest application date: 2020-10-28

FCC ID Device Details

Operating Frequencies

Exhibits

Application Information

Applications

Equipment Authorization

Grants

TCB Grant - Application Wt91sYLYVNTN5Ejn5D9Scw==

EAS Grant - Application Wt91sYLYVNTN5Ejn5D9Scw==

TCB Grant - Application rV9sgqaflj1gjJjl245anw==

EAS Grant - Application rV9sgqaflj1gjJjl245anw==

TCB Grant - Application PKDssqExFUxIFPdBCOhGAg==

EAS Grant - Application PKDssqExFUxIFPdBCOhGAg==

TCB Grant - Application jquAHPyZ/rNSKPuhU7PgxA==

EAS Grant - Application jquAHPyZ/rNSKPuhU7PgxA==

TCB Grant - Application egn9KfzHugxPwFu4/9VK3w==

EAS Grant - Application egn9KfzHugxPwFu4/9VK3w==

TCB Grant - Application ECTklBms5J2cL/Iu8aPDoA==

EAS Grant - Application ECTklBms5J2cL/Iu8aPDoA==