FCC ID 2ARHMLNQNSM01
Lynq Network Stack Module
by LYNQ Technologies, Inc.
Grantee Code: 2ARHM Product Code: LNQNSM01
Latest application date: 2020-10-14
FCC ID Device Details
| FCC ID | 2ARHMLNQNSM01 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ARHM |
| Product Code | LNQNSM01 |
| Applicant Business | LYNQ Technologies, Inc. 🇺🇸 |
| Related Domains |  lynqme.com |
| Equipment Class | Lynq Network Stack Module |
| Test Firm | SHENZHEN STS TEST SERVICES CO.,LTD. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.475-927.525 MHz | Original Equipment | 2020-10-14 |
| 925 MHz | Original Equipment | 2020-10-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2020-10-14 | PDF 677.2 KB |
| internal Photo | Internal Photos | 2020-10-14 | PDF 338.3 KB |
| External Photo | External Photos | 2020-10-14 | PDF 654.1 KB |
| Label | ID Label/Location Info | 2020-10-14 | PDF 1.7 MB |
| setup photo | Test Setup Photos | 2020-10-14 | PDF 558.3 KB |
| Test report | Test Report | 2020-10-14 | PDF 2.8 MB |
| test report | Test Report | 2020-10-14 | PDF 1.1 MB |
| AuthorizationLetter | Cover Letter(s) | 2020-10-14 | PDF 14.1 KB |
| Differences Description | Cover Letter(s) | 2020-10-14 | PDF 38.8 KB |
| Long Term Confidentiality Request Letter | Cover Letter(s) | 2020-10-14 | PDF 20.3 KB |
| single modular approval | Cover Letter(s) | 2020-10-14 | PDF 242.5 KB |
| RF exposure | RF Exposure Info | 2020-10-14 | PDF 161.2 KB |
| Block Metadata only | Block Diagram | PDF 232.3 KB | |
| Schematic diagram Metadata only | Schematics | PDF 459.5 KB | |
| Operational Description Metadata only | Operational Description | PDF 121.7 KB |
Application Information
| Application ID | Exb3yIBY6+uJ0h3rvqujlg== |
|---|---|
| Final Action Date | 2020-10-14 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0026699538 |
| Model | LNQNSM01 |
| Frequency Range | 902.475-927.525 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Lynq Network Stack Module |
| Responsible Party | Dennis Kong, Director of Operations, dennis@lynqme.com , 973-908-8834 |
| Technical Contact | Bovey Yang, Shenzhen STS Test Services Co., Ltd., bovey@stsapp.com  , 86-0755 36886288 |
| Test Firm | Bovey Yang, SHENZHEN STS TEST SERVICES CO.,LTD., Bovey@stsapp.com , +86 755-36886288 |
| TCB Email | jenn.warnell@metlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Output Power listed is conducted. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Exb3yIBY6+uJ0h3rvqujlg== | 2020-10-14 | Original Equipment |
| 7D1KpGKGbGf5IiyvbgoZRQ== | 2020-10-14 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Exb3yIBY6+uJ0h3rvqujlg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 10/14/2020 Application Dated: 10/14/2020 |
| LYNQ Technologies, Inc. |
| 19 Morris Avenue |
| Building 128 |
| Brooklyn, NY 11205 |
| Attention: Dennis Kong , Director of Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARHMLNQNSM01 |
| Name of Grantee: | LYNQ Technologies, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Lynq Network Stack Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.475 - 927.525 | 0.1268 |
| Single Modular Approval. Output Power listed is conducted. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Exb3yIBY6+uJ0h3rvqujlg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LYNQ Technologies, Inc. 19 Morris Avenue Building 128 Brooklyn, NY 11205 United States |
Date of Grant: 10/14/2020 Application Dated: 10/14/2020 |
| Attention: Dennis Kong , Director of Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARHMLNQNSM01 |
| Name of Grantee: | LYNQ Technologies, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Lynq Network Stack Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.475 - 927.525 | 0.1268 |
| Single Modular Approval. Output Power listed is conducted. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 10/14/2020 Application Dated: 10/14/2020 |
| LYNQ Technologies, Inc. |
| 19 Morris Avenue |
| Building 128 |
| Brooklyn, NY 11205 |
| Attention: Dennis Kong , Director of Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARHMLNQNSM01 |
| Name of Grantee: | LYNQ Technologies, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Lynq Network Stack Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 925.0 - 925.0 | 0.1845 |
| Single Modular Approval. Output Power listed is conducted. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 7D1KpGKGbGf5IiyvbgoZRQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LYNQ Technologies, Inc. 19 Morris Avenue Building 128 Brooklyn, NY 11205 United States |
Date of Grant: 10/14/2020 Application Dated: 10/14/2020 |
| Attention: Dennis Kong , Director of Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARHMLNQNSM01 |
| Name of Grantee: | LYNQ Technologies, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Lynq Network Stack Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 925.0 - 925.0 | 0.1845 |
| Single Modular Approval. Output Power listed is conducted. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |