FCC ID 2ARIP-0001
Bridge between sensor tags and hub
by Carnegie Technologies, LLC
Grantee Code: 2ARIP Product Code: 0001
Latest application date: 2019-03-05
FCC ID Device Details
| FCC ID | 2ARIP-0001 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ARIP |
| Product Code | 0001 |
| Applicant Business | Carnegie Technologies, LLC 🇺🇸 |
| Related Domains |  carnegietechnologies.com |
| Equipment Class | Bridge between sensor tags and hub |
| Test Firm | EUROFINS ELECTRICAL AND ELECTRONIC TESTING NA, INC |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2019-03-05 |
| 902.6-915.4 MHz | Original Equipment | 2019-03-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2019-03-05 | PDF 889.4 KB |
| Internal Photos | Internal Photos | 2019-09-01 | PDF 77.5 KB |
| External Photos | External Photos | 2019-03-05 | PDF 105.3 KB |
| Label | ID Label/Location Info | 2019-03-05 | PDF 92.7 KB |
| Label Location | ID Label/Location Info | 2019-03-05 | PDF 585 KB |
| Test Setup Photos | Test Setup Photos | 2019-03-05 | PDF 737 KB |
| Test Setup Photos | Test Setup Photos | 2019-03-05 | PDF 787.7 KB |
| Test Report | Test Report | 2019-03-05 | PDF 4.2 MB |
| Test Report | Test Report | 2019-03-05 | PDF 2.3 MB |
| FCC LT Confidentiality Letter | Cover Letter(s) | 2019-03-05 | PDF 626.7 KB |
| FCC ST Confidentiality Letter | Cover Letter(s) | 2019-03-05 | PDF 454.1 KB |
| Antenna Datasheet - 2.4G 9dbi | RF Exposure Info | 2019-03-05 | PDF 377.4 KB |
| Antenna Datasheet - 900 MHz | RF Exposure Info | 2019-03-05 | PDF 421 KB |
| Antenna Datasheet - OMNI 800 900MHz 6dBi | RF Exposure Info | 2019-03-05 | PDF 51.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 119.7 KB | |
| Schematics Metadata only | Schematics | PDF 1.1 MB | |
| Operational Description Metadata only | Operational Description | PDF 138.6 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 231 KB | |
| BOM - PCBA Metadata only | Parts List/Tune Up Info | PDF 268.2 KB |
Application Information
| Application ID | S9TpNrQOYSBg4AMwuQFSTg== |
|---|---|
| Final Action Date | 2019-03-05 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0027887041 |
| Model | 0001 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Bridge between sensor tags and hub |
| Responsible Party | John A Nagy, Compliance Engineer, jnagy@carnegietechnologies.com , 512-627-3787 |
| Test Firm | Greg Kovolenko, EUROFINS ELECTRICAL AND ELECTRONIC TESTING NA, INC, greg.kovolenko@metlabs.com  , 4108444071 |
| TCB Email | jenn.warnell@metlabs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 09/01/2019 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power listed is conducted. The device support 2x2 MIMO mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports 20MHz and 40MHz bandwidths. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| S9TpNrQOYSBg4AMwuQFSTg== | 2019-03-05 | Original Equipment |
| Ht1bPreDwTEn/G6kqUO4UQ== | 2019-03-05 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application S9TpNrQOYSBg4AMwuQFSTg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 03/05/2019 Application Dated: 03/05/2019 |
| Carnegie Technologies, LLC |
| 9737 Great Hills Trail |
| #260 |
| Austin, TX 78759 |
| Attention: John Nagy , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARIP-0001 |
| Name of Grantee: | Carnegie Technologies, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | Bridge between sensor tags and hub |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0057 |
| Output Power listed is conducted. The device support 2x2 MIMO mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports 20MHz and 40MHz bandwidths. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application S9TpNrQOYSBg4AMwuQFSTg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Carnegie Technologies, LLC 9737 Great Hills Trail #260 Austin, TX 78759 United States |
Date of Grant: 03/05/2019 Application Dated: 03/05/2019 |
| Attention: John Nagy , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARIP-0001 |
| Name of Grantee: | Carnegie Technologies, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | Bridge between sensor tags and hub |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0057 |
| Output Power listed is conducted. The device support 2x2 MIMO mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports 20MHz and 40MHz bandwidths. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 03/05/2019 Application Dated: 03/05/2019 |
| Carnegie Technologies, LLC |
| 9737 Great Hills Trail |
| #260 |
| Austin, TX 78759 |
| Attention: John Nagy , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARIP-0001 |
| Name of Grantee: | Carnegie Technologies, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bridge between sensor tags and hub |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.6 - 915.4 | 0.02937 |
| Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Ht1bPreDwTEn/G6kqUO4UQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Carnegie Technologies, LLC 9737 Great Hills Trail #260 Austin, TX 78759 United States |
Date of Grant: 03/05/2019 Application Dated: 03/05/2019 |
| Attention: John Nagy , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARIP-0001 |
| Name of Grantee: | Carnegie Technologies, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bridge between sensor tags and hub |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.6 - 915.4 | 0.02937 |
| Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |