FCC ID 2ARRD-AP6330

WIFI Module

by Lighthouse Technologies Limited

Grantee Code: 2ARRD   Product Code: AP6330
Latest application date: 2019-01-02

FCC ID Device Details

FCC ID2ARRD-AP6330
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ARRD
Product CodeAP6330
Applicant BusinessLighthouse Technologies Limited 🇨🇳
Related Domains lighthouse-tech.com lighthousetech.com
Equipment ClassWIFI Module
Test FirmEMTEK (Shenzhen) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2019-01-02
2412-2462 MHzOriginal Equipment2019-01-02

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2019-01-02PDF 250.7 KB
Internal PhotosInternal Photos2019-01-02PDF 536.4 KB
External PhotosExternal Photos2019-01-02PDF 160.6 KB
ID Label/Location InfoID Label/Location Info2019-01-02PDF 115.6 KB
Test Setup PhotosTest Setup Photos2019-01-02PDF 138.6 KB
Test Report_DTSTest Report2019-01-02PDF 3.3 MB
Test Report_NIITest Report2019-01-02PDF 3.8 MB
Declaration of authorizationCover Letter(s)2019-01-02PDF 24.8 KB
FCC Modular Approval RequestCover Letter(s)2019-01-02PDF 94.7 KB
WIFI Channel 12 and 13 Declaration LetterCover Letter(s)2019-01-02PDF 85.8 KB
confidentialityCover Letter(s)2019-01-02PDF 32.1 KB
MPERF Exposure Info2019-01-02PDF 29.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 183.9 KB
Schematics Metadata onlySchematicsPDF 182 KB
NII Software Security Info Metadata onlyOperational DescriptionPDF 61.7 KB
Operational Description Metadata onlyOperational DescriptionPDF 62.5 KB

Application Information

Application IDoixO1eJMFp2Vx/ae/dQWtA==
Final Action Date2019-01-02
Application PurposeOriginal Equipment
Applicant FRN0028003002
ModelAP6330
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWIFI Module
Responsible PartyZhihong Li, Engineer, lizhihong@lighthouse-tech.com , 0752-8468054
Technical ContactDavid Lee, EMTEK (SHENZHEN) CO., LTD., david.lee@emtek.com.cn , 86 755 26504659
Non-Technical ContactZhihong Li, Lighthouse Technologies Limited, lizhihong@lighthousetech.com , 86 0752-8468054
Test FirmLisa Wang, EMTEK (Shenzhen) Co., Ltd., wangli@emtek.com.cn , 86 755 26954280
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited single Modular Approval. Output power listed is conducted. This LMA does not meet RF shielding criterion and is tested and approved as standalone configuration, additional evaluation may be required for any system integrated this radio module. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except for the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Applications

Application IDDatePurpose
oixO1eJMFp2Vx/ae/dQWtA==2019-01-02Original Equipment
E9m2q7QWTCvDpHPobeIC1Q==2019-01-02Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.130000015CCC
5180-5240 MHz0.02415ECC
5745-5825 MHz0.04215ECC

Grants

TCB Grant - Application oixO1eJMFp2Vx/ae/dQWtA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 01/02/2019

Application Dated: 12/19/2018
Lighthouse Technologies Limited
FLAT/RM 608 6/F PHOTONICS CTR 2 SCIENCE PARK EAST
AVENUE HONG KONG SCIENCE PART SHATIN NT
Hong Kong, 516029
China
 
Attention: Zhihong Li , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARRD-AP6330
Name of Grantee:  Lighthouse Technologies Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WIFI Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.024  
CC 15E 5745.0  -  5825.0 0.042  

Limited single Modular Approval. Output power listed is conducted. This LMA does not meet RF shielding criterion and is tested and approved as standalone configuration, additional evaluation may be required for any system integrated this radio module. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except for the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application oixO1eJMFp2Vx/ae/dQWtA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Lighthouse Technologies Limited
FLAT/RM 608 6/F PHOTONICS CTR 2 SCIENCE PARK EAST AVENUE HONG KONG SCIENCE PART SHATIN NT
Hong Kong, 516029
China
  Date of Grant: 01/02/2019

Application Dated: 12/19/2018
 
Attention: Zhihong Li , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARRD-AP6330
Name of Grantee:  Lighthouse Technologies Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WIFI Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.024  
CC 15E 5745.0  -  5825.0 0.042  

Limited single Modular Approval. Output power listed is conducted. This LMA does not meet RF shielding criterion and is tested and approved as standalone configuration, additional evaluation may be required for any system integrated this radio module. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except for the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application E9m2q7QWTCvDpHPobeIC1Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 01/02/2019

Application Dated: 12/19/2018
Lighthouse Technologies Limited
FLAT/RM 608 6/F PHOTONICS CTR 2 SCIENCE PARK EAST
AVENUE HONG KONG SCIENCE PART SHATIN NT
Hong Kong, 516029
China
 
Attention: Zhihong Li , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARRD-AP6330
Name of Grantee:  Lighthouse Technologies Limited
Equipment Class: Digital Transmission System
Notes: WIFI Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.13  

Limited single Modular Approval. Output power listed is conducted. This LMA does not meet RF shielding criterion and is tested and approved as standalone configuration, additional evaluation may be required for any system integrated this radio module. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except for the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application E9m2q7QWTCvDpHPobeIC1Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Lighthouse Technologies Limited
FLAT/RM 608 6/F PHOTONICS CTR 2 SCIENCE PARK EAST AVENUE HONG KONG SCIENCE PART SHATIN NT
Hong Kong, 516029
China
  Date of Grant: 01/02/2019

Application Dated: 12/19/2018
 
Attention: Zhihong Li , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARRD-AP6330
Name of Grantee:  Lighthouse Technologies Limited
Equipment Class: Digital Transmission System
Notes: WIFI Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.13  

Limited single Modular Approval. Output power listed is conducted. This LMA does not meet RF shielding criterion and is tested and approved as standalone configuration, additional evaluation may be required for any system integrated this radio module. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except for the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: