FCC ID 2ARRT-TMT7X0302

Temperature Transmitter, Din rail housing

by Endress and Hauser Wetzer GmbH and Co. KG

Grantee Code: 2ARRT   Product Code: TMT7X0302
Latest application date: 2019-05-06

FCC ID Device Details

FCC ID2ARRT-TMT7X0302
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ARRT
Product CodeTMT7X0302
Applicant BusinessEndress and Hauser Wetzer GmbH and Co. KG 🇩🇪
Related Domains endress.com
Equipment ClassTemperature Transmitter, Din rail housing
Test Firm7layers GmbH

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2019-05-06

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2019-10-28PDF 1.9 MB
Internal PhotosInternal Photos2019-10-28PDF 372.2 KB
External PhotosExternal Photos2019-10-28PDF 1.6 MB
TMT71-Labeling PMN2ID Label/Location Info2019-05-06PDF 349.5 KB
TMT7x_labeling_PMN1ID Label/Location Info2019-05-06PDF 349.6 KB
Test Setup PhotosTest Setup Photos2019-10-28PDF 510.7 KB
Test ReportTest Report2019-05-06PDF 1.3 MB
ConfidentialityCover Letter(s)2019-05-06PDF 84 KB
Declaration of IdentityCover Letter(s)2019-05-06PDF 183.5 KB
DoACover Letter(s)2019-05-06PDF 201.4 KB
MPERF Exposure Info2019-05-06PDF 228.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 32.5 KB
Schematics Metadata onlySchematicsPDF 55.9 KB
Op.des Supplement_TI_Ant_GND Metadata onlyOperational DescriptionPDF 192.1 KB
TI01393TEN_0118_op.des Metadata onlyOperational DescriptionPDF 1.2 MB
BOM Metadata onlyParts List/Tune Up InfoPDF 141.2 KB

Application Information

Application ID1N/C9g9P5lLQaG7Y5mWhkw==
Final Action Date2019-05-06
Application PurposeOriginal Equipment
Applicant FRN0028003390
ModelTMT7X0302
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionTemperature Transmitter, Din rail housing
Responsible PartyDieter Waldhauser, dieter.waldhauser@endress.com , +498361308
AgentTeoman Teoman Teoman, 7Layers GmbH, Teoman.Soner-Sunar@7layers.com , 492102749339
Technical ContactDieter Waldhauser, Endress and Hauser Wetzer GmbH and Co. KG, dieter.waldhauser@endress.com , 498361308475
Non-Technical ContactDieter Waldhauser, Endress and Hauser Wetzer GmbH and Co. KG, dieter.waldhauser@endress.com , 498361308475
Test FirmBernhard Retka, 7layers GmbH, Bernhard.Retka@7layers.com , 0049 2102 749 452
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date10/28/2019
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except for the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
1N/C9g9P5lLQaG7Y5mWhkw==2019-05-06Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.001200015C

Grants

TCB Grant - Application 1N/C9g9P5lLQaG7Y5mWhkw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 05/06/2019

Application Dated: 04/30/2019
Endress and Hauser Wetzer GmbH and Co. KG
Obere Wank 1
Nesselwang, 87484
Germany
 
Attention: Dieter Waldhauser

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARRT-TMT7X0302
Name of Grantee:  Endress and Hauser Wetzer GmbH and Co. KG
Equipment Class: Digital Transmission System
Notes: Temperature Transmitter, Din rail housing
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0012  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except for the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 1N/C9g9P5lLQaG7Y5mWhkw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Endress and Hauser Wetzer GmbH and Co. KG
Obere Wank 1
Nesselwang, 87484
Germany
  Date of Grant: 05/06/2019

Application Dated: 04/30/2019
 
Attention: Dieter Waldhauser

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARRT-TMT7X0302
Name of Grantee:  Endress and Hauser Wetzer GmbH and Co. KG
Equipment Class: Digital Transmission System
Notes: Temperature Transmitter, Din rail housing
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0012  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except for the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: