FCC ID 2ARUAA3PRO
Smart phone
by Shenzhen Youmi Electronic Digital Co., Ltd.
Grantee Code: 2ARUA Product Code: A3PRO
Latest application date: 2018-11-27
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2APL8A3 Grant Date: 11/13/2018 | 2018-11-27 |
| 699.7-715.3 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2APL8A3 Grant Date: 11/13/2018 | 2018-11-27 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2APL8A3 Grant Date: 11/13/2018 | 2018-11-27 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2APL8A3 Grant Date: 11/13/2018 | 2018-11-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External photos | External Photos | 2018-11-27 | PDF 679 KB |
| Label | ID Label/Location Info | 2018-11-27 | PDF 119.7 KB |
| Cover letter | Cover Letter(s) | 2018-11-27 | PDF 104.2 KB |
Application Information
| Application ID | vJWM+SiFLqdpJPm7mneBEQ== |
|---|---|
| Final Action Date | 2018-11-27 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: 2APL8A3 Grant Date: 11/13/2018 |
| Applicant FRN | 0028652048 |
| Model | A3PRO |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Smart phone |
| Responsible Party | wang kun, manager, wangkun@91umi.com  , 86-0755-86549876 |
| Test Firm | Bruce Zhang, JianYan Testing Group Shenzhen Co., Ltd., bruce.zhang@ccis-cb.com  , +86 (0) 755 23118282 |
| TCB Email | stuart.beck@nemko.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. This device is approved for use in the handset described in this filing. SAR compliance for body-worn operations is restricted to beltclips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 1 cm separation between the device including its antenna and the body of user. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.17 W/kg, < 0.10 W/kg, < 0.10 W/kg, and 1.49 W/kg, respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| vJWM+SiFLqdpJPm7mneBEQ== | 2018-11-27 | Change in identification of presently authorized equipment. Original FCC ID: 2APL8A3 Grant Date: 11/13/2018 |
| Tdx4t5jDeUcoVhCOPpS+uA== | 2018-11-27 | Change in identification of presently authorized equipment. Original FCC ID: 2APL8A3 Grant Date: 11/13/2018 |
| 98pjcNtWJSCDeuZ5NtmNsw== | 2018-11-27 | Change in identification of presently authorized equipment. Original FCC ID: 2APL8A3 Grant Date: 11/13/2018 |
| 0SCvoLX4KKfT8zR5IwSMaA== | 2018-11-27 | Change in identification of presently authorized equipment. Original FCC ID: 2APL8A3 Grant Date: 11/13/2018 |
| +ZkCwhjW+BIm3dNHjHEWbw== | 2018-11-27 | Change in identification of presently authorized equipment. Original FCC ID: 2APL8A3 Grant Date: 11/13/2018 |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 15B | CC | ||||
| 699.7-715.3 MHz | 0.1028 | 0.23ppm | 1M09W7D | 27 | |
| 700.5-714.5 MHz | 0.1265 | 0.27ppm | 2M74G7D | 27 | |
| 704-711 MHz | 0.1216 | 0.27ppm | 9M12G7D | 27 | |
| 704-711 MHz | 0.1023 | 0.23ppm | 9M12W7D | 27 | |
| 706.5-713.5 MHz | 0.1294 | 0.28ppm | 4M54G7D | 27 | |
| 706.5-713.5 MHz | 0.1047 | 0.24ppm | 4M52W7D | 27 | |
| 709-711 MHz | 0.1219 | 0.28ppm | 8M96G7D | 27 | |
| 709-711 MHz | 0.0953 | 0.24ppm | 9M00W7D | 27 | |
| 826.4-846.6 MHz | 0.0916 | 0.2ppm | 4M20F9W | 22H | |
| 826.5-846.5 MHz | 0.1211 | 0.23ppm | 4M52G7D | 22H | |
| 829-844 MHz | 0.1183 | 0.23ppm | 9M12G7D | 22H | |
| 829-844 MHz | 0.0989 | 0.2ppm | 9M08W7D | 22H | |
| 1712.4-1752.6 MHz | 0.1782 | 0.1ppm | 4M18F9W | 27 | |
| 1715-1750 MHz | 0.2133 | 0.11ppm | 9M12G7D | 27 | |
| 1717.5-1747.5 MHz | 0.1875 | 0.1ppm | 13M6W7D | 27 | |
| 1720-1745 MHz | 0.2032 | 0.11ppm | 18M1G7D | 27 | |
| 1720-1745 MHz | 0.166 | 0.1ppm | 18M0W7D | 27 | |
| 1850.2-1909.8 MHz | 0.9333 | 0.09ppm | 248KGXW | 24E | |
| 1850.2-1909.8 MHz | 0.3083 | 0.1ppm | 250KG7W | 24E | |
| 1852.4-1907.6 MHz | 0.1239 | 0.1ppm | 4M20F9W | 24E | |
| 1855-1905 MHz | 0.2118 | 0.11ppm | 9M12G7D | 24E | |
| 1860-1900 MHz | 0.1986 | 0.11ppm | 18M0G7D | 24E | |
| 1860-1900 MHz | 0.1841 | 0.09ppm | 18M0W7D | 24E | |
| 2402-2480 MHz | 0.0046450 | 15C | CC | ||
| 2402-2480 MHz | 0.00416 | 15C | CC | ||
| 2412-2462 MHz | 0.04188 | 15C | CC | ||
| 2422-2452 MHz | 0.01786 | 15C | CC | ||
| 5180-5240 MHz | 0.00335 | 15E | CC | ||
| 5190-5230 MHz | 0.00259 | 15E | CC |
Grants
TCB Grant - Application vJWM+SiFLqdpJPm7mneBEQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/27/2018 Application Dated: 11/27/2018 |
| Shenzhen Youmi Electronic Digital Co., Ltd. |
| 406-407 Jinqi Zhigu Building 4/F |
| 1 Tangling Road Nanshan District |
| Shenzhen, China |
| Attention: wang kun , manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARUAA3PRO |
| Name of Grantee: | Shenzhen Youmi Electronic Digital Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.04188 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.01786 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.00416 |
| Output power listed is conducted. This device is approved for use in the handset described in this filing. SAR compliance for body-worn operations is restricted to beltclips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 1 cm separation between the device including its antenna and the body of user. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.17 W/kg, < 0.10 W/kg, < 0.10 W/kg, and 1.49 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application vJWM+SiFLqdpJPm7mneBEQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Youmi Electronic Digital Co., Ltd. 406-407 Jinqi Zhigu Building 4/F 1 Tangling Road Nanshan District Shenzhen, China |
Date of Grant: 11/27/2018 Application Dated: 11/27/2018 |
| Attention: wang kun , manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARUAA3PRO |
| Name of Grantee: | Shenzhen Youmi Electronic Digital Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.04188 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.01786 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.00416 |
| Output power listed is conducted. This device is approved for use in the handset described in this filing. SAR compliance for body-worn operations is restricted to beltclips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 1 cm separation between the device including its antenna and the body of user. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.17 W/kg, < 0.10 W/kg, < 0.10 W/kg, and 1.49 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/27/2018 Application Dated: 11/26/2018 |
| Shenzhen Youmi Electronic Digital Co., Ltd. |
| 406-407 Jinqi Zhigu Building 4/F |
| 1 Tangling Road Nanshan District |
| Shenzhen, China |
| Attention: wang kun , manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARUAA3PRO |
| Name of Grantee: | Shenzhen Youmi Electronic Digital Co., Ltd. |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | Smart phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.125 | 0.21 PM | 250KGXW | |
| 22H | 824.2 - 848.8 | 0.2716 | 0.21 PM | 256KG7W | |
| 22H | 826.4 - 846.6 | 0.0916 | 0.2 PM | 4M20F9W | |
| 24E | 1850.2 - 1909.8 | 0.9333 | 0.09 PM | 248KGXW | |
| 24E | 1850.2 - 1909.8 | 0.3083 | 0.1 PM | 250KG7W | |
| 24E | 1852.4 - 1907.6 | 0.1239 | 0.1 PM | 4M20F9W | |
| 27 | 1712.4 - 1752.6 | 0.1782 | 0.1 PM | 4M18F9W | |
| 24E | 1860.0 - 1900.0 | 0.1986 | 0.11 PM | 18M0G7D | |
| 24E | 1860.0 - 1900.0 | 0.1841 | 0.09 PM | 18M0W7D | |
| 24E | 1855.0 - 1905.0 | 0.2118 | 0.11 PM | 9M12G7D | |
| 27 | 1720.0 - 1745.0 | 0.2032 | 0.11 PM | 18M1G7D | |
| 27 | 1720.0 - 1745.0 | 0.166 | 0.1 PM | 18M0W7D | |
| 27 | 1715.0 - 1750.0 | 0.2133 | 0.11 PM | 9M12G7D | |
| 27 | 1717.5 - 1747.5 | 0.1875 | 0.1 PM | 13M6W7D | |
| 22H | 829.0 - 844.0 | 0.1183 | 0.23 PM | 9M12G7D | |
| 22H | 829.0 - 844.0 | 0.0989 | 0.2 PM | 9M08W7D | |
| 22H | 826.5 - 846.5 | 0.1211 | 0.23 PM | 4M52G7D | |
| 27 | 704.0 - 711.0 | 0.1216 | 0.27 PM | 9M12G7D | |
| 27 | 704.0 - 711.0 | 0.1023 | 0.23 PM | 9M12W7D | |
| 27 | 700.5 - 714.5 | 0.1265 | 0.27 PM | 2M74G7D | |
| 27 | 699.7 - 715.3 | 0.1028 | 0.23 PM | 1M09W7D | |
| 27 | 709.0 - 711.0 | 0.1219 | 0.28 PM | 8M96G7D | |
| 27 | 709.0 - 711.0 | 0.0953 | 0.24 PM | 9M00W7D | |
| 27 | 706.5 - 713.5 | 0.1294 | 0.28 PM | 4M54G7D | |
| 27 | 706.5 - 713.5 | 0.1047 | 0.24 PM | 4M52W7D |
| Output power listed is ERP for Part 22 and Part 27 for frequencies below 1 GHz, EIRP for Part 24 and Part 27 for frequencies above 1 GHz. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 1 cm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 1.35 W/kg, 0.49 W/kg, 0.49 W/kg, and 1.49 W/kg, respectively. This device contains functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. |
EAS Grant - Application Tdx4t5jDeUcoVhCOPpS+uA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Youmi Electronic Digital Co., Ltd. 406-407 Jinqi Zhigu Building 4/F 1 Tangling Road Nanshan District Shenzhen, China |
Date of Grant: 11/27/2018 Application Dated: 11/26/2018 |
| Attention: wang kun , manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARUAA3PRO |
| Name of Grantee: | Shenzhen Youmi Electronic Digital Co., Ltd. |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | Smart phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.125 | 0.21 PM | 250KGXW | |
| 22H | 824.2 - 848.8 | 0.2716 | 0.21 PM | 256KG7W | |
| 22H | 826.4 - 846.6 | 0.0916 | 0.2 PM | 4M20F9W | |
| 24E | 1850.2 - 1909.8 | 0.9333 | 0.09 PM | 248KGXW | |
| 24E | 1850.2 - 1909.8 | 0.3083 | 0.1 PM | 250KG7W | |
| 24E | 1852.4 - 1907.6 | 0.1239 | 0.1 PM | 4M20F9W | |
| 27 | 1712.4 - 1752.6 | 0.1782 | 0.1 PM | 4M18F9W | |
| 24E | 1860.0 - 1900.0 | 0.1986 | 0.11 PM | 18M0G7D | |
| 24E | 1860.0 - 1900.0 | 0.1841 | 0.09 PM | 18M0W7D | |
| 24E | 1855.0 - 1905.0 | 0.2118 | 0.11 PM | 9M12G7D | |
| 27 | 1720.0 - 1745.0 | 0.2032 | 0.11 PM | 18M1G7D | |
| 27 | 1720.0 - 1745.0 | 0.166 | 0.1 PM | 18M0W7D | |
| 27 | 1715.0 - 1750.0 | 0.2133 | 0.11 PM | 9M12G7D | |
| 27 | 1717.5 - 1747.5 | 0.1875 | 0.1 PM | 13M6W7D | |
| 22H | 829.0 - 844.0 | 0.1183 | 0.23 PM | 9M12G7D | |
| 22H | 829.0 - 844.0 | 0.0989 | 0.2 PM | 9M08W7D | |
| 22H | 826.5 - 846.5 | 0.1211 | 0.23 PM | 4M52G7D | |
| 27 | 704.0 - 711.0 | 0.1216 | 0.27 PM | 9M12G7D | |
| 27 | 704.0 - 711.0 | 0.1023 | 0.23 PM | 9M12W7D | |
| 27 | 700.5 - 714.5 | 0.1265 | 0.27 PM | 2M74G7D | |
| 27 | 699.7 - 715.3 | 0.1028 | 0.23 PM | 1M09W7D | |
| 27 | 709.0 - 711.0 | 0.1219 | 0.28 PM | 8M96G7D | |
| 27 | 709.0 - 711.0 | 0.0953 | 0.24 PM | 9M00W7D | |
| 27 | 706.5 - 713.5 | 0.1294 | 0.28 PM | 4M54G7D | |
| 27 | 706.5 - 713.5 | 0.1047 | 0.24 PM | 4M52W7D |
| Output power listed is ERP for Part 22 and Part 27 for frequencies below 1 GHz, EIRP for Part 24 and Part 27 for frequencies above 1 GHz. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 1 cm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 1.35 W/kg, 0.49 W/kg, 0.49 W/kg, and 1.49 W/kg, respectively. This device contains functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/27/2018 Application Dated: 11/27/2018 |
| Shenzhen Youmi Electronic Digital Co., Ltd. |
| 406-407 Jinqi Zhigu Building 4/F |
| 1 Tangling Road Nanshan District |
| Shenzhen, China |
| Attention: wang kun , manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARUAA3PRO |
| Name of Grantee: | Shenzhen Youmi Electronic Digital Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Smart phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.00335 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.00259 |
| Output power listed is conducted. This device is approved for use in the handset described in this filing. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 98pjcNtWJSCDeuZ5NtmNsw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Youmi Electronic Digital Co., Ltd. 406-407 Jinqi Zhigu Building 4/F 1 Tangling Road Nanshan District Shenzhen, China |
Date of Grant: 11/27/2018 Application Dated: 11/27/2018 |
| Attention: wang kun , manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARUAA3PRO |
| Name of Grantee: | Shenzhen Youmi Electronic Digital Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Smart phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.00335 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.00259 |
| Output power listed is conducted. This device is approved for use in the handset described in this filing. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/27/2018 Application Dated: 11/27/2018 |
| Shenzhen Youmi Electronic Digital Co., Ltd. |
| 406-407 Jinqi Zhigu Building 4/F |
| 1 Tangling Road Nanshan District |
| Shenzhen, China |
| Attention: wang kun , manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARUAA3PRO |
| Name of Grantee: | Shenzhen Youmi Electronic Digital Co., Ltd. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Smart phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 0SCvoLX4KKfT8zR5IwSMaA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Youmi Electronic Digital Co., Ltd. 406-407 Jinqi Zhigu Building 4/F 1 Tangling Road Nanshan District Shenzhen, China |
Date of Grant: 11/27/2018 Application Dated: 11/27/2018 |
| Attention: wang kun , manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARUAA3PRO |
| Name of Grantee: | Shenzhen Youmi Electronic Digital Co., Ltd. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Smart phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/27/2018 Application Dated: 11/27/2018 |
| Shenzhen Youmi Electronic Digital Co., Ltd. |
| 406-407 Jinqi Zhigu Building 4/F |
| 1 Tangling Road Nanshan District |
| Shenzhen, China |
| Attention: wang kun , manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARUAA3PRO |
| Name of Grantee: | Shenzhen Youmi Electronic Digital Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Smart phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004645 |
| Output power listed is conducted. This device is approved for use in the handset described in this filing. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application +ZkCwhjW+BIm3dNHjHEWbw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Youmi Electronic Digital Co., Ltd. 406-407 Jinqi Zhigu Building 4/F 1 Tangling Road Nanshan District Shenzhen, China |
Date of Grant: 11/27/2018 Application Dated: 11/27/2018 |
| Attention: wang kun , manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ARUAA3PRO |
| Name of Grantee: | Shenzhen Youmi Electronic Digital Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Smart phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004645 |
| Output power listed is conducted. This device is approved for use in the handset described in this filing. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |