FCC ID 2ARXKVHE09-4GL

veeaHub

by Veea Inc.

Grantee Code: 2ARXK   Product Code: VHE094GL
Latest application date: 2022-06-09

FCC ID Device Details

FCC ID2ARXKVHE09-4GL
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ARXK
Product CodeVHE094GL
Applicant BusinessVeea Inc. 🇺🇸
Related Domains veea.com
Equipment ClassveeaHub
Test FirmBureau Veritas CPS (H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2022-06-09
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-06-09
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-06-09
923.3-927.5 MHzOriginal Equipment2020-08-05
5180-5240 MHzOriginal Equipment2020-08-05
2402-2480 MHzOriginal Equipment2020-08-05

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2022-06-09PDF 613 KB
User Manual (Statement)Users Manual2022-06-09PDF 961 KB
Users ManualUsers Manual2022-06-09PDF 613 KB
Users Manual (Statement)Users Manual2022-06-09PDF 961 KB
User Manual-1Users Manual2021-02-02PDF 1.2 MB
User Manual-2Users Manual2021-02-02PDF 256.4 KB
Internal PhotosInternal Photos2022-06-09PDF 3.3 MB
Internal PhotosInternal Photos2021-02-02PDF 2.5 MB
Internal photosInternal Photos2021-02-02PDF 2.5 MB
External PhotosExternal Photos2022-06-09PDF 750.4 KB
External PhotosExternal Photos2021-02-02PDF 635.9 KB
External photoExternal Photos2021-02-02PDF 635.9 KB
External photosExternal Photos2021-02-02PDF 635.9 KB
Label LocationID Label/Location Info2022-06-09PDF 226 KB
Label SampleID Label/Location Info2022-06-09PDF 427.4 KB
LabelID Label/Location Info2020-08-05PDF 455 KB
Label LocationID Label/Location Info2020-08-05PDF 158.3 KB
Label locationID Label/Location Info2020-08-05PDF 158.3 KB
Test Setup PhotosTest Setup Photos2022-06-09PDF 2.7 MB
RF Test set-up PhotoTest Setup Photos2021-02-02PDF 848.3 KB
RF Test set-up photoTest Setup Photos2021-02-02PDF 848.3 KB
Antenna Data SheetTest Report2022-06-09PDF 4.5 MB
DFS test reportTest Report2022-06-09PDF 3.9 MB
RF Test ReportTest Report2022-06-09PDF 1.3 MB
RF Test Report (BT LE)Test Report2022-06-09PDF 1.1 MB
RF Test Report (LoRa)Test Report2022-06-09PDF 958.2 KB
RF Test Report (WLAN)Test Report2022-06-09PDF 887.5 KB
RF Test Report (Zigbee)Test Report2022-06-09PDF 870.5 KB
RF test reportTest Report2022-06-09PDF 1.1 MB
DFS Test ReportTest Report2020-08-05PDF 2.2 MB
Initial Test Report- NII-1Test Report2020-08-05PDF 809.1 KB
Initial Test Report- NII-2Test Report2020-08-05PDF 743.9 KB
Initial Test Report-BLETest Report2020-08-05PDF 703.6 KB
Initial Test Report-BTTest Report2020-08-05PDF 1.1 MB
Initial Test Report-WIFITest Report2020-08-05PDF 1.8 MB
Initial Test Report-ZigbeeTest Report2020-08-05PDF 482.2 KB
RF Test Report -WIFITest Report2020-08-05PDF 234.4 KB
RF Test Report-BLETest Report2020-08-05PDF 263.9 KB
RF Test Report-BTTest Report2020-08-05PDF 268.8 KB
RF Test Report-LoRaTest Report2020-08-05PDF 470.8 KB
RF Test Report-NIITest Report2020-08-05PDF 291.3 KB
RF Test Report-ZigbeeTest Report2020-08-05PDF 220.1 KB
Referencing Test Data Declaration LetterTest Report2020-08-05PDF 502.4 KB
Referencing Test Data Description LetterTest Report2020-08-05PDF 502.4 KB
Professional Installation DeclarationAttestation Statements2022-06-09PDF 176.8 KB
Agent Authorization LetterCover Letter(s)2022-06-09PDF 279.3 KB
C2PC Request LetterCover Letter(s)2022-06-09PDF 120.5 KB
Agent Authorization LetterCover Letter(s)2020-08-05PDF 60.8 KB
Authorization LetterCover Letter(s)2020-08-05PDF 119.6 KB
DFS Description letterCover Letter(s)2020-08-05PDF 165.4 KB
DTS-UNII Declaration letterCover Letter(s)2020-08-05PDF 565.1 KB
LTC/STC LetterCover Letter(s)2020-08-05PDF 124.5 KB
WIFI Channel 12&13 Description letterCover Letter(s)2020-08-05PDF 43.3 KB
RF Exposure ReportRF Exposure Info2022-06-09PDF 470.3 KB
RF Exposure reportRF Exposure Info2020-08-05PDF 66.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 330.8 KB
Schematics-1 Metadata onlySchematicsPDF 3.1 MB
Schematics-2 Metadata onlySchematicsPDF 4.1 MB
Schematics-2.4G Metadata onlySchematicsPDF 1.9 MB
Schematics-5G Metadata onlySchematicsPDF 1.6 MB
Schematics-RG-1008M Metadata onlySchematicsPDF 382.2 KB
Operational Description Metadata onlyOperational DescriptionPDF 63.5 KB
Operational description Metadata onlyOperational DescriptionPDF 63.5 KB
SW Declaration Letter Metadata onlyOperational DescriptionPDF 5.7 MB

Application Information

Application IDcIPRDiJiS4KZnbtx1XaT6w==
Final Action Date2022-06-09
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0028040590
ModelVHE09-4GL
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionveeaHub
Responsible PartyRichard Kerr, rich@veea.com , 6197875225
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com , +886-(0)3-260-0884
TCB Emailcertification@bureauveritas.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsC2PC to update mainboard, change contained WWAN module to EG25G MINIPCIE for new model VHH09-4GL and allowed outdoor use. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons. Power listed is conducted output power. Professional installation is required. Device has 20MHz/40MHz bandwidth and Support 2x2 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
cIPRDiJiS4KZnbtx1XaT6w==2022-06-09Class II permissive change or modification of presently authorized equipment
Imib0HViswowAzGVO7PLfA==2022-06-09Class II permissive change or modification of presently authorized equipment
42lpYKfKKIyAo/Rui4zMkA==2022-06-09Class II permissive change or modification of presently authorized equipment
Nq396BvpLSD2i7715AGuyg==2020-08-05Original Equipment
CtBVt51Psv1Q0wYroFMX3Q==2020-08-05Original Equipment
+z/5BaZiVeH+wFaWGwEHxA==2020-08-05Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
923.3-927.5 MHz0.315CCC
2402-2480 MHz0.002000015CCC
2402-2480 MHz0.00115CCC
2405-2475 MHz0.05115CCC
2412-2462 MHz0.54115CCC, MO
5180-5240 MHz0.82615ECC, MO
5260-5320 MHz0.23615ECC, MO, ND
5500-5720 MHz0.24215ECC, MO, ND
5745-5825 MHz0.99815ECC, MO

Grants

TCB Grant - Application Nq396BvpLSD2i7715AGuyg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 08/05/2020

Application Dated: 07/24/2020
Veea Inc.
164 E 83rd Street
NEW YORK, NY 10028
 
Attention: Richard Kerr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARXKVHE09-4GL
Name of Grantee:  Veea Inc.
Equipment Class: Digital Transmission System
Notes: veeaHub
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.001  
CC MO 15C 2412.0  -  2462.0 0.541  
CC 15C 2405.0  -  2475.0 0.051  
CC 15C 923.3  -  927.5 0.3  

Power listed is conducted output power. Professional installation is required. Device has 20MHz/40MHz bandwidth and Support 2x2 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Nq396BvpLSD2i7715AGuyg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Veea Inc.
164 E 83rd Street
NEW YORK, NY 10028
United States
  Date of Grant: 08/05/2020

Application Dated: 07/24/2020
 
Attention: Richard Kerr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARXKVHE09-4GL
Name of Grantee:  Veea Inc.
Equipment Class: Digital Transmission System
Notes: veeaHub
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.001  
CC MO 15C 2412.0  -  2462.0 0.541  
CC 15C 2405.0  -  2475.0 0.051  
CC 15C 923.3  -  927.5 0.3  

Power listed is conducted output power. Professional installation is required. Device has 20MHz/40MHz bandwidth and Support 2x2 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Imib0HViswowAzGVO7PLfA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 06/09/2022

Application Dated: 05/27/2022
Veea Inc.
164 E 83rd Street
NEW YORK, NY 10028
 
Attention: Richard Kerr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARXKVHE09-4GL
Name of Grantee:  Veea Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: veeaHub
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.826  
CC MO ND 15E 5260.0  -  5320.0 0.236  
CC MO ND 15E 5500.0  -  5720.0 0.242  
CC MO 15E 5745.0  -  5825.0 0.998  

C2PC to update mainboard, change contained WWAN module to EG25G MINIPCIE for new model VHH09-4GL and allowed outdoor use. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons.

Power listed is conducted output power. Professional installation is required. Device is restricted to indoor use. This device is 4x4 MIMO and has 20, 40, 80 bandwidth modes, also VHT80+VHT80 BW mode for NII-1/-3 bands. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application Imib0HViswowAzGVO7PLfA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Veea Inc.
164 E 83rd Street
NEW YORK, NY 10028
United States
  Date of Grant: 06/09/2022

Application Dated: 05/27/2022
 
Attention: Richard Kerr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARXKVHE09-4GL
Name of Grantee:  Veea Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: veeaHub
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.826  
CC MO ND 15E 5260.0  -  5320.0 0.236  
CC MO ND 15E 5500.0  -  5720.0 0.242  
CC MO 15E 5745.0  -  5825.0 0.998  

C2PC to update mainboard, change contained WWAN module to EG25G MINIPCIE for new model VHH09-4GL and allowed outdoor use. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons.

Power listed is conducted output power. Professional installation is required. Device is restricted to indoor use. This device is 4x4 MIMO and has 20, 40, 80 bandwidth modes, also VHT80+VHT80 BW mode for NII-1/-3 bands. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application CtBVt51Psv1Q0wYroFMX3Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 08/05/2020

Application Dated: 07/24/2020
Veea Inc.
164 E 83rd Street
NEW YORK, NY 10028
 
Attention: Richard Kerr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARXKVHE09-4GL
Name of Grantee:  Veea Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: veeaHub
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.826  
CC MO ND 15E 5260.0  -  5320.0 0.236  
CC MO ND 15E 5500.0  -  5720.0 0.242  
CC MO 15E 5745.0  -  5825.0 0.998  

Power listed is conducted output power. Professional installation is required. Device is restricted to indoor use. This device is 4x4 MIMO and has 20, 40, 80 bandwidth modes, also VHT80+VHT80 BW mode for NII-1/-3 bands. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application CtBVt51Psv1Q0wYroFMX3Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Veea Inc.
164 E 83rd Street
NEW YORK, NY 10028
United States
  Date of Grant: 08/05/2020

Application Dated: 07/24/2020
 
Attention: Richard Kerr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARXKVHE09-4GL
Name of Grantee:  Veea Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: veeaHub
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.826  
CC MO ND 15E 5260.0  -  5320.0 0.236  
CC MO ND 15E 5500.0  -  5720.0 0.242  
CC MO 15E 5745.0  -  5825.0 0.998  

Power listed is conducted output power. Professional installation is required. Device is restricted to indoor use. This device is 4x4 MIMO and has 20, 40, 80 bandwidth modes, also VHT80+VHT80 BW mode for NII-1/-3 bands. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application cIPRDiJiS4KZnbtx1XaT6w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 06/09/2022

Application Dated: 05/27/2022
Veea Inc.
164 E 83rd Street
NEW YORK, NY 10028
 
Attention: Richard Kerr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARXKVHE09-4GL
Name of Grantee:  Veea Inc.
Equipment Class: Digital Transmission System
Notes: veeaHub
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.001  
CC MO 15C 2412.0  -  2462.0 0.541  
CC 15C 2405.0  -  2475.0 0.051  
CC 15C 923.3  -  927.5 0.3  

C2PC to update mainboard, change contained WWAN module to EG25G MINIPCIE for new model VHH09-4GL and allowed outdoor use. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons.

Power listed is conducted output power. Professional installation is required. Device has 20MHz/40MHz bandwidth and Support 2x2 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application cIPRDiJiS4KZnbtx1XaT6w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Veea Inc.
164 E 83rd Street
NEW YORK, NY 10028
United States
  Date of Grant: 06/09/2022

Application Dated: 05/27/2022
 
Attention: Richard Kerr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARXKVHE09-4GL
Name of Grantee:  Veea Inc.
Equipment Class: Digital Transmission System
Notes: veeaHub
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.001  
CC MO 15C 2412.0  -  2462.0 0.541  
CC 15C 2405.0  -  2475.0 0.051  
CC 15C 923.3  -  927.5 0.3  

C2PC to update mainboard, change contained WWAN module to EG25G MINIPCIE for new model VHH09-4GL and allowed outdoor use. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons.

Power listed is conducted output power. Professional installation is required. Device has 20MHz/40MHz bandwidth and Support 2x2 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 42lpYKfKKIyAo/Rui4zMkA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 06/09/2022

Application Dated: 05/27/2022
Veea Inc.
164 E 83rd Street
NEW YORK, NY 10028
 
Attention: Richard Kerr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARXKVHE09-4GL
Name of Grantee:  Veea Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: veeaHub
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  

C2PC to update mainboard, change contained WWAN module to EG25G MINIPCIE for new model VHH09-4GL and allowed outdoor use. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons.

Power listed is conducted output power. Professional installation is required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 42lpYKfKKIyAo/Rui4zMkA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Veea Inc.
164 E 83rd Street
NEW YORK, NY 10028
United States
  Date of Grant: 06/09/2022

Application Dated: 05/27/2022
 
Attention: Richard Kerr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARXKVHE09-4GL
Name of Grantee:  Veea Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: veeaHub
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  

C2PC to update mainboard, change contained WWAN module to EG25G MINIPCIE for new model VHH09-4GL and allowed outdoor use. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons.

Power listed is conducted output power. Professional installation is required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application +z/5BaZiVeH+wFaWGwEHxA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 08/05/2020

Application Dated: 07/24/2020
Veea Inc.
164 E 83rd Street
NEW YORK, NY 10028
 
Attention: Richard Kerr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARXKVHE09-4GL
Name of Grantee:  Veea Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: veeaHub
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  

Power listed is conducted output power. Professional installation is required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application +z/5BaZiVeH+wFaWGwEHxA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Veea Inc.
164 E 83rd Street
NEW YORK, NY 10028
United States
  Date of Grant: 08/05/2020

Application Dated: 07/24/2020
 
Attention: Richard Kerr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARXKVHE09-4GL
Name of Grantee:  Veea Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: veeaHub
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  

Power listed is conducted output power. Professional installation is required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 29 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: