FCC ID 2AS4H-BLINC

Subeca BLINC

by Subeca, Inc.

Grantee Code: 2AS4H   Product Code: BLINC
Latest application date: 2021-06-23

FCC ID Device Details

FCC ID2AS4H-BLINC
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AS4H
Product CodeBLINC
Applicant BusinessSubeca, Inc. 🇺🇸
Related Domains subeca.com
Equipment ClassSubeca BLINC
Test FirmVista Laboratories, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2021-06-23
902.3-914.9 MHzOriginal Equipment2021-06-23

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2021-06-23PDF 1.9 MB
Internal PhotosInternal Photos2021-06-23PDF 215.9 KB
External PhotosExternal Photos2021-06-23PDF 456.9 KB
ID Label/Location InfoID Label/Location Info2021-06-23PDF 185.1 KB
Test Setup PhotoTest Setup Photos2021-06-23PDF 441.7 KB
Test Setup PhotosTest Setup Photos2021-06-23PDF 441.7 KB
Test Setup Photos Metadata onlyTest Report2021-06-23PDF 441.7 KB
Test ReportTest Report2021-06-23PDF 1.7 MB
Test ReportTest Report2021-06-23PDF 2.4 MB
FCC Agent Authorization LetterCover Letter(s)2021-06-23PDF 89.6 KB
FCC Confidentiality Request LetterCover Letter(s)2021-06-23PDF 108.3 KB
FCC Modular Approval LetterCover Letter(s)2021-06-23PDF 112.9 KB
RF Exposure InfoRF Exposure Info2021-06-23PDF 469.3 KB
Block Diagram Metadata onlyBlock DiagramPDF 27.9 KB
Schematics Metadata onlySchematicsPDF 1.2 MB
Operational Description Metadata onlyOperational DescriptionPDF 110.1 KB

Application Information

Application IDO6VCPO3R/cmgHy7HDscpVw==
Final Action Date2021-06-23
Application PurposeOriginal Equipment
Applicant FRN0028413904
ModelBLINC
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionSubeca BLINC
Responsible PartyMatthew Froncillo, VP Engineering, matt.froncillo@subeca.com , 760-297-3004
Test FirmDavid Zhang, Vista Laboratories, Inc., info@vista-compliance.com , +1 (949) 464-7589
TCB EmailCB@vista-compliance.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module.

Applications

Application IDDatePurpose
O6VCPO3R/cmgHy7HDscpVw==2021-06-23Original Equipment
/w4dKIHfVlrIpRIWV31E3w==2021-06-23Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
902.3-914.9 MHz0.087000015CCC
2402-2480 MHz0.004300015CCC

Grants

TCB Grant - Application O6VCPO3R/cmgHy7HDscpVw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Vista Laboratories, Inc.
1261 Puerta Del Sol
San Clemente, CA 92673
Date of Grant: 06/23/2021

Application Dated: 06/23/2021
Subeca, Inc.
4514 Cole Avenue
Suite 600
Dallas, TX 75205
 
Attention: Matthew Froncillo , VP Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AS4H-BLINC
Name of Grantee:  Subeca, Inc.
Equipment Class: Digital Transmission System
Notes: Subeca BLINC
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0043  

Power Output listed is conducted. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application O6VCPO3R/cmgHy7HDscpVw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Subeca, Inc.
4514 Cole Avenue Suite 600
Dallas, TX 75205
United States
  Date of Grant: 06/23/2021

Application Dated: 06/23/2021
 
Attention: Matthew Froncillo , VP Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AS4H-BLINC
Name of Grantee:  Subeca, Inc.
Equipment Class: Digital Transmission System
Notes: Subeca BLINC
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0043  

Power Output listed is conducted. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application /w4dKIHfVlrIpRIWV31E3w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Vista Laboratories, Inc.
1261 Puerta Del Sol
San Clemente, CA 92673
Date of Grant: 06/23/2021

Application Dated: 06/23/2021
Subeca, Inc.
4514 Cole Avenue
Suite 600
Dallas, TX 75205
 
Attention: Matthew Froncillo , VP Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AS4H-BLINC
Name of Grantee:  Subeca, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Subeca BLINC
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.3  -  914.9 0.087  

Power Output listed is conducted. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application /w4dKIHfVlrIpRIWV31E3w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Subeca, Inc.
4514 Cole Avenue Suite 600
Dallas, TX 75205
United States
  Date of Grant: 06/23/2021

Application Dated: 06/23/2021
 
Attention: Matthew Froncillo , VP Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AS4H-BLINC
Name of Grantee:  Subeca, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Subeca BLINC
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.3  -  914.9 0.087  

Power Output listed is conducted. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: