FCC ID 2AS4H-MOD01
LoRA module
by Subeca, Inc.
Grantee Code: 2AS4H Product Code: MOD01
Latest application date: 2019-07-10
FCC ID Device Details
| FCC ID | 2AS4H-MOD01 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AS4H |
| Product Code | MOD01 |
| Applicant Business | Subeca, Inc. 🇺🇸 |
| Related Domains |  subeca.com |
| Equipment Class | LoRA module |
| Test Firm | Vista Laboratories, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.3-914.9 MHz | Class II permissive change or modification of presently authorized equipment | 2019-07-10 |
| 902.3-914.9 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYCMABZ Grant Date: 09/28/2018 | 2019-07-10 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2019-07-10 | PDF 382.1 KB |
| External Photos | External Photos | 2019-07-10 | PDF 498.7 KB |
| External Photos | External Photos | 2019-07-10 | PDF 315 KB |
| Host Label & Location | ID Label/Location Info | 2019-07-10 | PDF 217 KB |
| ID Label/Location Info | ID Label/Location Info | 2019-07-10 | PDF 179.8 KB |
| C2PC Test report | Test Report | 2019-07-10 | PDF 2.4 MB |
| Authorization letter | Cover Letter(s) | 2019-07-10 | PDF 43.8 KB |
| C2PC request letter | Cover Letter(s) | 2019-07-10 | PDF 62.2 KB |
| Change of ID authorization letter | Cover Letter(s) | 2019-07-10 | PDF 903.2 KB |
| Change of ID request letter | Cover Letter(s) | 2019-07-10 | PDF 43.6 KB |
| RF Exposure Info | RF Exposure Info | 2019-07-10 | PDF 259.1 KB |
Application Information
| Application ID | t23Vaef9KiOHIMJ0gtL0Mw== |
|---|---|
| Final Action Date | 2019-07-10 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0028413904 |
| Model | MOD01 |
| Frequency Range | 902.3-914.9 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | LoRA module |
| Responsible Party | Matthew Froncillo, VP Engineering, matt.froncillo@subeca.com , 760-297-3004 |
| Technical Contact | David Zhang, Vista Laboratories, inc., info@vista-compliance.com  , 9493931123 |
| Test Firm | David Zhang, Vista Laboratories, Inc., info@vista-compliance.com , +1 (949) 464-7589 |
| TCB Email | CB@vista-compliance.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | CIIPC of adding new antenna and specific mobile configuration host described in this filing. Output power listed is conducted. Single modular approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.9 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125 kHz and 500 kHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| t23Vaef9KiOHIMJ0gtL0Mw== | 2019-07-10 | Class II permissive change or modification of presently authorized equipment |
| qFBUAotiOBJgjnSTxI5i9w== | 2019-07-10 | Change in identification of presently authorized equipment. Original FCC ID: VPYCMABZ Grant Date: 09/28/2018 |
Grants
TCB Grant - Application t23Vaef9KiOHIMJ0gtL0Mw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Vista Laboratories, Inc. 1261 Puerta Del Sol San Clemente, CA 92673 |
Date of Grant: 07/10/2019 Application Dated: 07/10/2019 |
| Subeca, Inc. |
| 4514 Cole Avenue |
| Suite 600 |
| Dallas, TX 75205 |
| Attention: Matthew Froncillo , VP Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AS4H-MOD01 |
| Name of Grantee: | Subeca, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | LoRA module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0644 |
| CIIPC of adding new antenna and specific mobile configuration host described in this filing. Output power listed is conducted. Single modular approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.9 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125 kHz and 500 kHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
EAS Grant - Application t23Vaef9KiOHIMJ0gtL0Mw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Subeca, Inc. 4514 Cole Avenue Suite 600 Dallas, TX 75205 United States |
Date of Grant: 07/10/2019 Application Dated: 07/10/2019 |
| Attention: Matthew Froncillo , VP Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AS4H-MOD01 |
| Name of Grantee: | Subeca, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | LoRA module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0644 |
| CIIPC of adding new antenna and specific mobile configuration host described in this filing. Output power listed is conducted. Single modular approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.9 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125 kHz and 500 kHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Vista Laboratories, Inc. 1261 Puerta Del Sol San Clemente, CA 92673 |
Date of Grant: 07/10/2019 Application Dated: 07/10/2019 |
| Subeca, Inc. |
| 4514 Cole Avenue |
| Suite 600 |
| Dallas, TX 75205 |
| Attention: Matthew Froncillo , VP Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AS4H-MOD01 |
| Name of Grantee: | Subeca, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | LoRA module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0644 |
| Output power listed is conducted. Single modular approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125 kHz and 500 kHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
EAS Grant - Application qFBUAotiOBJgjnSTxI5i9w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Subeca, Inc. 4514 Cole Avenue Suite 600 Dallas, TX 75205 United States |
Date of Grant: 07/10/2019 Application Dated: 07/10/2019 |
| Attention: Matthew Froncillo , VP Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AS4H-MOD01 |
| Name of Grantee: | Subeca, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | LoRA module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.0746 | |||
| 15C | 903.0 - 914.2 | 0.0644 |
| Output power listed is conducted. Single modular approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125 kHz and 500 kHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation. |
| Mail To: |