FCC ID 2AS4MHNJ-350E

Kegel Exercise Device

by Furun Health Care Co., Ltd.

Grantee Code: 2AS4M   Product Code: HNJ350E
Latest application date: 2021-07-26

FCC ID Device Details

FCC ID2AS4MHNJ-350E
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AS4M
Product CodeHNJ350E
Applicant BusinessFurun Health Care Co., Ltd. 🇰🇷
Equipment ClassKegel Exercise Device
Test FirmLTA Co.,Ltd

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2021-07-26
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2019-06-28
2412-2472 MHzChange in identification of presently authorized equipment. Original FCC ID: 2AC7Z-ESPWROOM02 Grant Date: 12/22/20162019-06-07

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2022-01-22PDF 1.6 MB
User ManualUsers Manual2019-12-25PDF 1.1 MB
Internal PhotosInternal Photos2019-12-25PDF 4.4 MB
External PhotosExternal Photos2022-01-22PDF 1.1 MB
External PhotosExternal Photos2019-12-25PDF 468.1 KB
External PhotosExternal Photos2019-12-04PDF 1.1 MB
Label LocationID Label/Location Info2019-06-28PDF 107 KB
Label LocationID Label/Location Info2019-06-07PDF 107 KB
Test Setup PhotosTest Setup Photos2019-12-25PDF 350.9 KB
Test Report HNJ-350E FCCTest Report2021-07-26PDF 1.7 MB
DoC Attestation LetterAttestation Statements2019-06-28PDF 87.1 KB
C2PC LetterCover Letter(s)2021-07-26PDF 100.4 KB
Confidentiality LetterCover Letter(s)2021-07-26PDF 92.7 KB
Cover LetterCover Letter(s)2021-07-26PDF 87.6 KB
LOA LetterCover Letter(s)2021-07-26PDF 18.9 KB
Authorization LetterCover Letter(s)2019-06-28PDF 18.7 KB
Confidentiality Request LetterCover Letter(s)2019-06-28PDF 94.2 KB
Cover LetterCover Letter(s)2019-06-28PDF 87.4 KB
Authorization LetterCover Letter(s)2019-06-07PDF 18.3 KB
Change in ID RequestCover Letter(s)2019-06-07PDF 86.7 KB
Confidentiality Request LetterCover Letter(s)2019-06-07PDF 18.9 KB
License AgreementCover Letter(s)2019-06-07PDF 2.1 MB
RF ExposureRF Exposure Info2021-07-26PDF 2.6 MB
SAR ReportRF Exposure Info2019-06-28PDF 2.6 MB
Block Diagram Metadata onlyBlock DiagramPDF 275.7 KB
Schematics Metadata onlySchematicsPDF 130.7 KB
Operation Description Metadata onlyOperational DescriptionPDF 2.5 MB
Operational Description Metadata onlyOperational DescriptionPDF 1.2 MB
Parts List Metadata onlyParts List/Tune Up InfoPDF 95.6 KB

Application Information

Application IDmRMMdtHxLjL85u/NE9k1Qg==
Final Action Date2021-07-26
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0028414977
ModelHNJ-350E
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionKegel Exercise Device
Responsible PartyBYOUNG MO KANG, CEO, kbm33@hanmail.net , 821033487848
Test FirmAhn Chulho, LTA Co.,Ltd, chahn@ltalab.com , 82-31-323-6008
TCB Emailtei@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date01/22/2022
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: Integrating module for portable application into FurunHealthcare Co., Ltd., Models HNJ-350E and HNJ-350K. The highest reported SAR is 0.32 W/kg.

Applications

Application IDDatePurpose
mRMMdtHxLjL85u/NE9k1Qg==2021-07-26Class II permissive change or modification of presently authorized equipment
VqQ6sEq/FDjlu7w930kUeA==2019-06-28Class II permissive change or modification of presently authorized equipment
60RyrG1KXCxVqgcdrDtyrg==2019-06-07Change in identification of presently authorized equipment. Original FCC ID: 2AC7Z-ESPWROOM02 Grant Date: 12/22/2016

Equipment Authorization

FrequencyOutputRules
2412-2472 MHz0.167000015C
2412-2462 MHz0.167000015C

Grants

TCB Grant - Application VqQ6sEq/FDjlu7w930kUeA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 06/28/2019

Application Dated: 06/28/2019
Furun Health Care Co., Ltd.
( Gangwon-Technopark), 206, 130-2
Donghwagongdan-ro, Munmak-eup
Wonju-si, 26365
South Korea
 
Attention: BYOUNG MO KANG , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AS4MHNJ-350E
Name of Grantee:  Furun Health Care Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Wi-Fi Internet of Things Module.
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.167  

Limited Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: Integrating module for portable application into Furun Medical Co.,Ltd., Model HnJ-350. The highest reported SAR is 0.32 W/kg.

EAS Grant - Application VqQ6sEq/FDjlu7w930kUeA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Furun Health Care Co., Ltd.
( Gangwon-Technopark), 206, 130-2 Donghwagongdan-ro, Munmak-eup
Wonju-si, 26365
South Korea
  Date of Grant: 06/28/2019

Application Dated: 06/28/2019
 
Attention: BYOUNG MO KANG , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AS4MHNJ-350E
Name of Grantee:  Furun Health Care Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Wi-Fi Internet of Things Module.
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.167  

Limited Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: Integrating module for portable application into Furun Medical Co.,Ltd., Model HnJ-350. The highest reported SAR is 0.32 W/kg.



TCB Grant - Application mRMMdtHxLjL85u/NE9k1Qg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 07/26/2021

Application Dated: 07/26/2021
Furun Health Care Co., Ltd.
( Gangwon-Technopark), 206, 130-2
Donghwagongdan-ro, Munmak-eup
Wonju-si, 26365
South Korea
 
Attention: BYOUNG MO KANG , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AS4MHNJ-350E
Name of Grantee:  Furun Health Care Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Kegel Exercise Device
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.167  

Limited Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: Integrating module for portable application into FurunHealthcare Co., Ltd., Models HNJ-350E and HNJ-350K. The highest reported SAR is 0.32 W/kg.

EAS Grant - Application mRMMdtHxLjL85u/NE9k1Qg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Furun Health Care Co., Ltd.
( Gangwon-Technopark), 206, 130-2 Donghwagongdan-ro, Munmak-eup
Wonju-si, 26365
South Korea
  Date of Grant: 07/26/2021

Application Dated: 07/26/2021
 
Attention: BYOUNG MO KANG , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AS4MHNJ-350E
Name of Grantee:  Furun Health Care Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Kegel Exercise Device
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.167  

Limited Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: Integrating module for portable application into FurunHealthcare Co., Ltd., Models HNJ-350E and HNJ-350K. The highest reported SAR is 0.32 W/kg.



TCB Grant - Application 60RyrG1KXCxVqgcdrDtyrg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 06/07/2019

Application Dated: 06/07/2019
Furun Health Care Co., Ltd.
( Gangwon-Technopark), 206, 130-2
Donghwagongdan-ro, Munmak-eup
Wonju-si, 26365
South Korea
 
Attention: BYOUNG MO KANG , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AS4MHNJ-350E
Name of Grantee:  Furun Health Care Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Wi-Fi Internet of Things Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2472.0 0.167  

Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

EAS Grant - Application 60RyrG1KXCxVqgcdrDtyrg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Furun Health Care Co., Ltd.
( Gangwon-Technopark), 206, 130-2 Donghwagongdan-ro, Munmak-eup
Wonju-si, 26365
South Korea
  Date of Grant: 06/07/2019

Application Dated: 06/07/2019
 
Attention: BYOUNG MO KANG , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AS4MHNJ-350E
Name of Grantee:  Furun Health Care Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Wi-Fi Internet of Things Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2472.0 0.167  

Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.



Mail To: