FCC ID 2AS66B-1603
Electronic Vaping System
by Philip Morris Products S.A
Grantee Code: 2AS66 Product Code: B1603
Latest application date: 2022-02-17
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-02-17 |
| 2402-2480 MHz | Original Equipment | 2021-12-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| 2AS66B-1603_UserMan | Users Manual | 2022-06-18 | PDF 2.9 MB |
| 2AS66B-1603_IntPho | Internal Photos | 2022-08-16 | PDF 287.1 KB |
| 2AS66B-1603_IntPho | Internal Photos | 2022-06-18 | PDF 3.7 MB |
| 2AS66B-1603_ExtPho | External Photos | 2022-08-16 | PDF 1.5 MB |
| 2AS66B-1603_ExtPho | External Photos | 2022-06-18 | PDF 3.2 MB |
| 2AS66B-1603_LabelSmpl | ID Label/Location Info | 2021-12-20 | PDF 997.7 KB |
| 2AS66B-1603_TSup | Test Setup Photos | 2022-08-16 | PDF 2.3 MB |
| 2AS66B-1603_TSup | Test Setup Photos | 2022-06-18 | PDF 3.5 MB |
| 2AS66B-1603_TRpt | Test Report | 2022-02-17 | PDF 1.9 MB |
| 2AS66B-1603_TRpt_15B | Test Report | 2021-12-20 | PDF 1.9 MB |
| 2AS66B-1603_TRpt_15C | Test Report | 2021-12-20 | PDF 4.1 MB |
| 2AS66B-1603_AutLet | Cover Letter(s) | 2022-02-17 | PDF 213.2 KB |
| 2AS66B-1603_C2PC-Letter | Cover Letter(s) | 2022-02-17 | PDF 263.8 KB |
| 2AS66B-1603_Con Req | Cover Letter(s) | 2022-02-17 | PDF 502.9 KB |
| 2AS66B-1603_STC Letter | Cover Letter(s) | 2022-02-17 | PDF 463.8 KB |
| 2AS66B-1603_AutLet | Cover Letter(s) | 2021-12-20 | PDF 381.5 KB |
| 2AS66B-1603_ConReq | Cover Letter(s) | 2021-12-20 | PDF 392.1 KB |
| 2AS66B-1603_STC | Cover Letter(s) | 2021-12-20 | PDF 206.9 KB |
| 2AS66B-1603_RF EXp | RF Exposure Info | 2021-12-20 | PDF 949.5 KB |
| 2AS66B-1603_BlkDia Metadata only | Block Diagram | PDF 321.6 KB | |
| 2AS66B-1603_Schem Metadata only | Schematics | PDF 1,011.1 KB | |
| 2AS66B-1603_AntSpec Metadata only | Operational Description | PDF 312.4 KB | |
| 2AS66B-1603_OpDes Metadata only | Operational Description | PDF 69.2 KB | |
| 2AS66B-1603_BoM Metadata only | Parts List/Tune Up Info | PDF 136 KB |
Application Information
| Application ID | FJ31FlwwmgiTkPjYPl+1kA== |
|---|---|
| Final Action Date | 2022-02-17 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0028437788 |
| Model | B-1603 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Electronic Vaping System |
| Responsible Party | Marco Esposito, marco.esposito@pmi.com  , +41 (58) 242 3722 |
| Test Firm | Jorg Kusig, Eurofins Product Service GmbH, joergkusig@eurofins.de  , 49-33631-888-700 |
| TCB Email | joergkusig@eurofins.de |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 08/16/2022 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: Added new battery model– BAT0296. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| FJ31FlwwmgiTkPjYPl+1kA== | 2022-02-17 | Class II permissive change or modification of presently authorized equipment |
| bfUAx64vRmfd/ycwNS4ghA== | 2021-12-20 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0054000 | 15C |
Grants
TCB Grant - Application FJ31FlwwmgiTkPjYPl+1kA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 02/17/2022 Application Dated: 02/17/2022 |
| Philip Morris Products S.A |
| Avenue de Rhodanie, 50 |
| Lausanne, 1007 Switzerland |
| Attention: Marco Esposito |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AS66B-1603 |
| Name of Grantee: | Philip Morris Products S.A |
| Equipment Class: | Digital Transmission System |
| Notes: | Electronic Vaping System |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0054 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: Added new battery model– BAT0296. |
EAS Grant - Application FJ31FlwwmgiTkPjYPl+1kA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Philip Morris Products S.A Avenue de Rhodanie, 50 Lausanne, 1007 Switzerland |
Date of Grant: 02/17/2022 Application Dated: 02/17/2022 |
| Attention: Marco Esposito |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AS66B-1603 |
| Name of Grantee: | Philip Morris Products S.A |
| Equipment Class: | Digital Transmission System |
| Notes: | Electronic Vaping System |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0054 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: Added new battery model– BAT0296. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 12/20/2021 Application Dated: 12/20/2021 |
| Philip Morris Products S.A |
| Avenue de Rhodanie, 50 |
| Lausanne, 1007 Switzerland |
| Attention: Marco Esposito |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AS66B-1603 |
| Name of Grantee: | Philip Morris Products S.A |
| Equipment Class: | Digital Transmission System |
| Notes: | Electronic Vaping System |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0054 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application bfUAx64vRmfd/ycwNS4ghA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Philip Morris Products S.A Avenue de Rhodanie, 50 Lausanne, 1007 Switzerland |
Date of Grant: 12/20/2021 Application Dated: 12/20/2021 |
| Attention: Marco Esposito |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AS66B-1603 |
| Name of Grantee: | Philip Morris Products S.A |
| Equipment Class: | Digital Transmission System |
| Notes: | Electronic Vaping System |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0054 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |