FCC ID 2AS8LSFM20R2
Sigfox module
by SEONG JI INDUSTRIAL CO., LTD
Grantee Code: 2AS8L Product Code: SFM20R2
Latest application date: 2019-07-11
FCC ID Device Details
| FCC ID | 2AS8LSFM20R2 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AS8L |
| Product Code | SFM20R2 |
| Applicant Business | SEONG JI INDUSTRIAL CO., LTD 🇰🇷 |
| Related Domains |  seongji.co.kr |
| Equipment Class | Sigfox module |
| Test Firm | HCT Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.138-904.663 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2ABA2SFM20R2 Grant Date: 08/22/2017 | 2019-07-11 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2ABA2SFM20R2 Grant Date: 08/22/2017 | 2019-07-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photo | External Photos | 2019-07-11 | PDF 834.5 KB |
| Label Location | ID Label/Location Info | 2019-07-11 | PDF 189.7 KB |
| Label Location Metadata only | Cover Letter(s) | 2019-07-11 | PDF 189.7 KB |
| Agent Authorization Letter | Cover Letter(s) | 2019-07-11 | PDF 172.3 KB |
| Letter for Change ID | Cover Letter(s) | 2019-07-11 | PDF 212.9 KB |
| Product Authorization Letter | Cover Letter(s) | 2019-07-11 | PDF 111.3 KB |
Application Information
| Application ID | eQqfy5kJNXYYSH+Xu5ej0Q== |
|---|---|
| Final Action Date | 2019-07-11 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: 2ABA2SFM20R2 Grant Date: 08/22/2017 |
| Applicant FRN | 0028451391 |
| Model | SFM20R2 |
| Frequency Range | 902.138-904.663 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Sigfox module |
| Responsible Party | Lee sangyoung, senior researcher, sylee@seongji.co.kr , +82-70-7837-2853 |
| Test Firm | Lee Yoon-Jung, HCT Co., Ltd., yjlee@hct.co.kr  , 82-31-645-6432 |
| TCB Email | tcb@hctamerica.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output is conducted. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no access to the antennas/connectors and has no manual instructions to remove or install this module. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| eQqfy5kJNXYYSH+Xu5ej0Q== | 2019-07-11 | Change in identification of presently authorized equipment. Original FCC ID: 2ABA2SFM20R2 Grant Date: 08/22/2017 |
| CBpllJNE0wU4pdMbw2RYOw== | 2019-07-11 | Change in identification of presently authorized equipment. Original FCC ID: 2ABA2SFM20R2 Grant Date: 08/22/2017 |
Equipment Authorization
Grants
TCB Grant - Application eQqfy5kJNXYYSH+Xu5ej0Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131 |
Date of Grant: 07/11/2019 Application Dated: 07/09/2019 |
| SEONG JI INDUSTRIAL CO., LTD |
| 54-33, Dongtanhana 1-gil, Gyeonggi-do |
| Hwaseong-si, South Korea |
| Attention: Lee sangyoung , senior researcher |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AS8LSFM20R2 |
| Name of Grantee: | SEONG JI INDUSTRIAL CO., LTD |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Sigfox module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.1375 - 904.6625 | 0.176 | ||
| CC | 15C | 920.1375 - 922.6625 | 0.188 |
| Power output is conducted. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no access to the antennas/connectors and has no manual instructions to remove or install this module. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application eQqfy5kJNXYYSH+Xu5ej0Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SEONG JI INDUSTRIAL CO., LTD 54-33, Dongtanhana 1-gil, Gyeonggi-do Hwaseong-si, South Korea |
Date of Grant: 07/11/2019 Application Dated: 07/09/2019 |
| Attention: Lee sangyoung , senior researcher |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AS8LSFM20R2 |
| Name of Grantee: | SEONG JI INDUSTRIAL CO., LTD |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Sigfox module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.1375 - 904.6625 | 0.176 | ||
| CC | 15C | 920.1375 - 922.6625 | 0.188 |
| Power output is conducted. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no access to the antennas/connectors and has no manual instructions to remove or install this module. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131 |
Date of Grant: 07/11/2019 Application Dated: 07/09/2019 |
| SEONG JI INDUSTRIAL CO., LTD |
| 54-33, Dongtanhana 1-gil, Gyeonggi-do |
| Hwaseong-si, South Korea |
| Attention: Lee sangyoung , senior researcher |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AS8LSFM20R2 |
| Name of Grantee: | SEONG JI INDUSTRIAL CO., LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | Sigfox module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00212 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.112 |
| Power output is conducted. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no access to the antennas/connectors and has no manual instructions to remove or install this module. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application CBpllJNE0wU4pdMbw2RYOw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SEONG JI INDUSTRIAL CO., LTD 54-33, Dongtanhana 1-gil, Gyeonggi-do Hwaseong-si, South Korea |
Date of Grant: 07/11/2019 Application Dated: 07/09/2019 |
| Attention: Lee sangyoung , senior researcher |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AS8LSFM20R2 |
| Name of Grantee: | SEONG JI INDUSTRIAL CO., LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | Sigfox module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00212 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.112 |
| Power output is conducted. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no access to the antennas/connectors and has no manual instructions to remove or install this module. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |