FCC ID 2ASIVPGD228FNC
Electronic lock with BLE & fingerprint & RFID
by PIN GENIE, INC. DBA LOCKLY
Grantee Code: 2ASIV Product Code: PGD228FNC
Latest application date: 2023-12-04
FCC ID Device Details
| FCC ID | 2ASIVPGD228FNC |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ASIV |
| Product Code | PGD228FNC |
| Applicant Business | PIN GENIE, INC. DBA LOCKLY 🇺🇸 |
| Related Domains | |
| Equipment Class | Electronic lock with BLE & fingerprint & RFID |
| Test Firm | Waltek Testing Group (Shenzhen) Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-12-04 |
| 13.56 MHz | Class II permissive change or modification of presently authorized equipment | 2023-12-04 |
| 2402-2480 MHz | Original Equipment | 2022-09-16 |
| 13.56 MHz | Original Equipment | 2022-09-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual-2 | Users Manual | 2023-12-04 | PDF 4.8 MB |
| User manual-1 | Users Manual | 2023-12-04 | PDF 5 MB |
| Users Manual | Users Manual | 2022-09-16 | PDF 1.2 MB |
| Internal Photos-1 | Internal Photos | 2023-12-04 | PDF 4.6 MB |
| Internal Photos-2 | Internal Photos | 2023-12-04 | PDF 5.4 MB |
| Internal Photos-3 | Internal Photos | 2023-12-04 | PDF 3.7 MB |
| Internal Photos-1 | Internal Photos | 2022-09-16 | PDF 4.3 MB |
| Internal Photos-2 | Internal Photos | 2022-09-16 | PDF 4.2 MB |
| Internal Photos-3 | Internal Photos | 2022-09-16 | PDF 5.1 MB |
| External Photos-1 | External Photos | 2023-12-04 | PDF 5 MB |
| External Photos-2 | External Photos | 2023-12-04 | PDF 4.8 MB |
| External Photos-3 | External Photos | 2023-12-04 | PDF 5.1 MB |
| External Photos-4 | External Photos | 2023-12-04 | PDF 543.6 KB |
| External Photos-1 | External Photos | 2022-09-16 | PDF 4.3 MB |
| External Photos-2 | External Photos | 2022-09-16 | PDF 4.3 MB |
| Label and Location | ID Label/Location Info | 2023-12-04 | PDF 824.5 KB |
| Label and Location | ID Label/Location Info | 2022-09-16 | PDF 1 MB |
| Test Setup Photos | Test Setup Photos | 2023-12-04 | PDF 1.4 MB |
| Test Setup Photos | Test Setup Photos | 2022-09-16 | PDF 1.7 MB |
| Test Report | Test Report | 2023-12-04 | PDF 321.2 KB |
| Test Report | Test Report | 2023-12-04 | PDF 308.5 KB |
| Antenna Spec BT | Test Report | 2022-09-16 | PDF 3.2 MB |
| Antenna Spec NFC | Test Report | 2022-09-16 | PDF 148.6 KB |
| Test Report DTS | Test Report | 2022-09-16 | PDF 1.6 MB |
| Test Report DXX | Test Report | 2022-09-16 | PDF 1.1 MB |
| Attestation Statements part 2.911_d__5__i_filing | Attestation Statements | 2023-12-04 | PDF 48.3 KB |
| Attestation Statements part 2.911_d__5__ii_ filing | Attestation Statements | 2023-12-04 | PDF 48.4 KB |
| US Agent letter | Attestation Statements | 2023-12-04 | PDF 87.6 KB |
| US agent Letter | Attestation Statements | 2023-12-04 | PDF 87.6 KB |
| SDoc Attestation Letter | Cover Letter(s) | 2022-09-16 | PDF 43 KB |
| C2PC LETTER | Cover Letter(s) | 2023-12-04 | PDF 249.3 KB |
| C2PC Letter | Cover Letter(s) | 2023-12-04 | PDF 249.3 KB |
| CONF Letter | Cover Letter(s) | 2023-12-04 | PDF 77.2 KB |
| POA Letter | Cover Letter(s) | 2023-12-04 | PDF 50.7 KB |
| CONF Letter | Cover Letter(s) | 2022-09-16 | PDF 115.3 KB |
| POA Letter | Cover Letter(s) | 2022-09-16 | PDF 77 KB |
| RF Exposure Info | RF Exposure Info | 2023-12-04 | PDF 137.1 KB |
| RF Exposure Info | RF Exposure Info | 2022-09-16 | PDF 178.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 460.3 KB | |
| Schematics Metadata only | Schematics | PDF 316.4 KB | |
| Schematics Metadata only | Schematics | PDF 343.3 KB | |
| Operation Description Metadata only | Operational Description | PDF 424.4 KB | |
| Operational Description Metadata only | Operational Description | PDF 424.4 KB |
Application Information
| Application ID | hmz4S2rBNbkobAWjWpt2Lg== |
|---|---|
| Final Action Date | 2023-12-04 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0028246908 |
| Model | PGD228FNC |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Electronic lock with BLE & fingerprint & RFID |
| Responsible Party | Cindy zhou, COO, biz@pin-genie.com |
| Test Firm | Jandy So, Waltek Testing Group (Shenzhen) Co., Ltd., jandyso@semtest.com.cn |
| TCB Email | TEI@timcoengr.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Change. Output Power listed is the maximum conducted output power. This device must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| hmz4S2rBNbkobAWjWpt2Lg== | 2023-12-04 | Class II permissive change or modification of presently authorized equipment |
| c2XvrHSRwIzn4co/QI1PQA== | 2023-12-04 | Class II permissive change or modification of presently authorized equipment |
| qsxKdBNs/iVlhkVHXuepdg== | 2022-09-16 | Original Equipment |
| QBqEFnXVOa1KZmJzNeT5vg== | 2022-09-16 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application qsxKdBNs/iVlhkVHXuepdg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/16/2022 Application Dated: 09/15/2022 |
| PIN GENIE, INC. DBA LOCKLY |
| 676 Transfer Rd., |
| St. Paul,, MN 55114 |
| Attention: Cindy zhou , COO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ASIVPGD228FNC |
| Name of Grantee: | PIN GENIE, INC. DBA LOCKLY |
| Equipment Class: | Digital Transmission System |
| Notes: | Electronic lock with BLE & fingerprint & RFID |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0012 |
| This device must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Output Power listed is the maximum conducted power. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application qsxKdBNs/iVlhkVHXuepdg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
PIN GENIE, INC. DBA LOCKLY 676 Transfer Rd., St. Paul,, MN 55114 United States |
Date of Grant: 09/16/2022 Application Dated: 09/15/2022 |
| Attention: Cindy zhou , COO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ASIVPGD228FNC |
| Name of Grantee: | PIN GENIE, INC. DBA LOCKLY |
| Equipment Class: | Digital Transmission System |
| Notes: | Electronic lock with BLE & fingerprint & RFID |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0012 |
| This device must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Output Power listed is the maximum conducted power. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/16/2022 Application Dated: 09/15/2022 |
| PIN GENIE, INC. DBA LOCKLY |
| 676 Transfer Rd., |
| St. Paul,, MN 55114 |
| Attention: Cindy zhou , COO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ASIVPGD228FNC |
| Name of Grantee: | PIN GENIE, INC. DBA LOCKLY |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | Electronic lock with BLE & fingerprint & RFID |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 13.56 - 13.56 |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application QBqEFnXVOa1KZmJzNeT5vg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
PIN GENIE, INC. DBA LOCKLY 676 Transfer Rd., St. Paul,, MN 55114 United States |
Date of Grant: 09/16/2022 Application Dated: 09/15/2022 |
| Attention: Cindy zhou , COO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ASIVPGD228FNC |
| Name of Grantee: | PIN GENIE, INC. DBA LOCKLY |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | Electronic lock with BLE & fingerprint & RFID |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 13.56 - 13.56 |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/04/2023 Application Dated: 12/04/2023 |
| PIN GENIE, INC. DBA LOCKLY |
| 676 Transfer Rd., |
| St. Paul,, MN 55114 |
| Attention: Cindy zhou , COO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ASIVPGD228FNC |
| Name of Grantee: | PIN GENIE, INC. DBA LOCKLY |
| Equipment Class: | Digital Transmission System |
| Notes: | Electronic lock with BLE & fingerprint & RFID |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0012 |
| Class II Change. Output Power listed is the maximum conducted output power. This device must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. |
EAS Grant - Application hmz4S2rBNbkobAWjWpt2Lg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
PIN GENIE, INC. DBA LOCKLY 676 Transfer Rd., St. Paul,, MN 55114 United States |
Date of Grant: 12/04/2023 Application Dated: 12/04/2023 |
| Attention: Cindy zhou , COO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ASIVPGD228FNC |
| Name of Grantee: | PIN GENIE, INC. DBA LOCKLY |
| Equipment Class: | Digital Transmission System |
| Notes: | Electronic lock with BLE & fingerprint & RFID |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0012 |
| Class II Change. Output Power listed is the maximum conducted output power. This device must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/04/2023 Application Dated: 12/04/2023 |
| PIN GENIE, INC. DBA LOCKLY |
| 676 Transfer Rd., |
| St. Paul,, MN 55114 |
| Attention: Cindy zhou , COO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ASIVPGD228FNC |
| Name of Grantee: | PIN GENIE, INC. DBA LOCKLY |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | Electronic lock with BLE & fingerprint & RFID |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 13.56 - 13.56 |
| Class II Change -This device must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. |
EAS Grant - Application c2XvrHSRwIzn4co/QI1PQA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
PIN GENIE, INC. DBA LOCKLY 676 Transfer Rd., St. Paul,, MN 55114 United States |
Date of Grant: 12/04/2023 Application Dated: 12/04/2023 |
| Attention: Cindy zhou , COO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ASIVPGD228FNC |
| Name of Grantee: | PIN GENIE, INC. DBA LOCKLY |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | Electronic lock with BLE & fingerprint & RFID |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 13.56 - 13.56 |
| Class II Change -This device must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. |
| Mail To: |